Openvpn client dual wan

[mic912]

Hi,

I've a pfsense 1.2.3 with 1 WAN

LAN (SIS0): 192.168.0.1/24
WAN (SIS1): 192.168.2.1/24

In pfsense i've configured a openvpclient with tun0 and i added OPENVPNCLIENT
interface on Tun0 in (menu Interfaces/assigned)

In OPENVPNCLIENT interface i've set up

• Enabled is checked
• Type DHCP
• BRIDGE none
  My openvclient gets some routes from openvpn server like "push 192.168.1.0/24"

In system-advanced, i've checked "Disable all auto-added VPN rules".

LAN clients work fine with this configuration. All packet to 192.168.1.xxx are pushed into OPENVPNCLIENT.

Now i need to create a failover with a second WAN2 in (SIS2). Failover needs to work
default on WAN2. When WAN2 switch offline, WAN1 needs to became default route.

So I added the WAN2 interface and i've configured Services-LoadBalance-Failover(*).
In system-advanced i've checked

• Use sticky connections
  In firewall rules, I've add default rules from lan network to any with failover(*) gateway.

My problems are

• With WAN2 and WAN1 online, the default route is always WAN1. If WAN1 go down, WAN2 don't works.
• the openvpn client don't work. All clients packets to 192.168.1.xxx
  go out in WAN1 but not in openvpn tunnel.

The strange thing is if I delete openvpnclient configuration failover works fine.

It's a metric problem or other?

Thank you
mic