Wireless speed

jette

Dear All,

I have set up a 11b AP successful. It works fine. However, I found that its download speed is limited to 100KB (If I use 2 computers for testing, the speed will drop to 50kb each) but the upload speed can be up to 400Kb. If I use lan for speed testing, the download speed is around 2000kb (sometimes 4000kb or more) and the upload speed is almost the same . Is there any hidden config for speed limitation of the wireless card? Thanks a lot.

ural0: flags=108843 <up,broadcast,running,simplex,multicast,needsgiant>mtu 1500
inet6 fe80::213:46ff:fe63:56a0%ural0 prefixlen 64 scopeid 0x3
inet 192.168.100.254 netmask 0xffffff00 broadcast 192.168.100.255
ether 00:13:46:63:56:a0
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b <hostap>status: associated
ssid UTICCBC-SSELERW channel 1 bssid 00:13:46:63:56:a0
authmode OPEN privacy OFF txpowmax 100 protmode OFF -apbridge
dtimperiod 1 bintval 100

Regards,
Jette</hostap></up,broadcast,running,simplex,multicast,needsgiant>

hoba

Check status>interfaces. Do you see one way errors on the wireless interface? This is an indication for having only one Antenna connected whereas the driver seems to use diversity (2 antennas). Search the forum, thare are already threads discussing these problems.

jette

@hoba:

Check status>interfaces. Do you see one way errors on the wireless interface? This is an indication for having only one Antenna connected whereas the driver seems to use diversity (2 antennas). Search the forum, thare are already threads discussing these problems.

Thanks a lot. I have tried to set txantenna but I got the following error:

sysctl: unknown oid 'dev.ath.0.txantenna'

I am now using an USB wireless. Here is the information.

net.wlan.0.%parent: ural0
dev.ural.0.%desc: ANI 802.11g WLAN Adapter, rev 2.00/0.01, addr 2
dev.ural.0.%driver: ural
dev.ural.0.%location: port=0
dev.ural.0.%pnpinfo: vendor=0x2001 product=0x3c00 devclass=0x00 devsubclass=0x00 release=0x0001 sernum=""
dev.ural.0.%parent: uhub1

How to set txantenna and rxantenna? Thanks a lot.

Regards,
Jette

hoba

Not sure about this driver as the command that you reference only applies to atheros chipsets. Maybe someone else knows something about urals.