INTEL Pro Wireless 2200BG 4gnano image install problems
-
Mar 3 09:17:21 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
Mar 3 09:17:21 kernel: iwi_bss: could not load firmware image, error 2
Mar 3 09:17:21 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
Mar 3 09:17:21 kernel: iwi0: could not load firmwarehow to i can fix it.
PFSENSE rc 2.01. 4g nanobsd
alix 2d13 board -
See the second paragraph in the Description section of the man page for iwi:
http://www.freebsd.org/cgi/man.cgi?query=iwi&apropos=0&sektion=0&manpath=FreeBSD+9.0-RELEASE&arch=default&format=html -
is not solution for my problems anythink in in your link
there is a firmware load problem
added loader.conf
if_iwi_load="YES"
wlan_load="YES"
firmware_load="YES"
iwi_bss_load="YES"
iwi_ibss_load="YES"
iwi_monitor_load="YES"
legal.intel_iwi.license_ack=1
legal.intel_ipw.license_ack=1
legal.intel_wpi.license_ack=1Mar 4 00:02:11 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Mar 4 00:02:11 kernel: The Regents of the University of California. All rights reserved. Mar 4 00:02:11 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Mar 4 00:02:11 kernel: FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:59:41 EST 2011 Mar 4 00:02:11 kernel: root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_wrap.8.i386 i386 Mar 4 00:02:11 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Mar 4 00:02:11 kernel: CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU) Mar 4 00:02:11 kernel: Origin = "AuthenticAMD" Id = 0x5a2 Family = 5 Model = a Stepping = 2 Mar 4 00:02:11 kernel: Features=0x88a93d <fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>Mar 4 00:02:11 kernel: AMD Features=0xc0400000 <mmx+,3dnow!+,3dnow!>Mar 4 00:02:11 kernel: real memory = 268435456 (256 MB) Mar 4 00:02:11 kernel: avail memory = 243433472 (232 MB) Mar 4 00:02:11 kernel: pnpbios: Bad PnP BIOS data checksum Mar 4 00:02:11 kernel: netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling Mar 4 00:02:11 kernel: wlan: mac acl policy registered Mar 4 00:02:11 kernel: K6-family MTRR support enabled (2 registers) Mar 4 00:02:11 kernel: ACPI Error: A valid RSDP was not found (20100331/tbxfroot-309) Mar 4 00:02:11 kernel: ACPI: Table initialisation failed: AE_NOT_FOUND Mar 4 00:02:11 kernel: ACPI: Try disabling either ACPI or apic support. Mar 4 00:02:11 kernel: cryptosoft0: <software crypto=""> on motherboard Mar 4 00:02:11 kernel: padlock0: No ACE support. Mar 4 00:02:11 kernel: pcib0: <host to="" pci="" bridge=""> pcibus 0 on motherboard Mar 4 00:02:11 kernel: pci0: <pci bus=""> on pcib0 Mar 4 00:02:11 kernel: Geode LX: PC Engines ALIX.2 v0.99h tinyBIOS V1.4a (C)1997-2007 Mar 4 00:02:11 kernel: pci0: <encrypt decrypt,="" entertainment="" crypto=""> at device 1.2 (no driver attached) Mar 4 00:02:11 kernel: vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx=""> port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0 Mar 4 00:02:11 kernel: vr0: Quirks: 0x2 Mar 4 00:02:11 kernel: vr0: Revision: 0x96 Mar 4 00:02:11 kernel: miibus0: <mii bus=""> on vr0 Mar 4 00:02:11 kernel: ukphy0: <generic ieee="" 802.3u="" media="" interface=""> PHY 1 on miibus0 Mar 4 00:02:11 kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Mar 4 00:02:11 kernel: vr0: [ITHREAD] Mar 4 00:02:11 kernel: vr1: <via 10="" vt6105m="" rhine="" iii="" 100basetx=""> port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0 Mar 4 00:02:11 kernel: vr1: Quirks: 0x2 Mar 4 00:02:11 kernel: vr1: Revision: 0x96 Mar 4 00:02:11 kernel: miibus1: <mii bus=""> on vr1 Mar 4 00:02:11 kernel: ukphy1: <generic ieee="" 802.3u="" media="" interface=""> PHY 1 on miibus1 Mar 4 00:02:11 kernel: ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Mar 4 00:02:11 kernel: vr1: [ITHREAD] Mar 4 00:02:11 kernel: vr2: <via 10="" vt6105m="" rhine="" iii="" 100basetx=""> port 0x1800-0x18ff mem 0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0 Mar 4 00:02:11 kernel: vr2: Quirks: 0x2 Mar 4 00:02:11 kernel: vr2: Revision: 0x96 Mar 4 00:02:11 kernel: miibus2: <mii bus=""> on vr2 Mar 4 00:02:11 kernel: ukphy2: <generic ieee="" 802.3u="" media="" interface=""> PHY 1 on miibus2 Mar 4 00:02:11 kernel: ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Mar 4 00:02:11 kernel: vr2: [ITHREAD] Mar 4 00:02:11 kernel: iwi0: <intel(r) pro="" wireless="" 2200bg=""> mem 0xe00c0000-0xe00c0fff irq 9 at device 12.0 on pci0 Mar 4 00:02:11 kernel: iwi0: [ITHREAD] Mar 4 00:02:11 kernel: isab0: <pci-isa bridge=""> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0 Mar 4 00:02:11 kernel: isa0: <isa bus=""> on isab0 Mar 4 00:02:11 kernel: atapci0: <amd cs5536="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0 Mar 4 00:02:11 kernel: ata0: <ata 0="" channel=""> on atapci0 Mar 4 00:02:11 kernel: ata0: [ITHREAD] Mar 4 00:02:11 kernel: ata1: <ata 1="" channel=""> on atapci0 Mar 4 00:02:11 kernel: ata1: [ITHREAD] Mar 4 00:02:11 kernel: ohci0: <ohci (generic)="" usb="" controller=""> mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0 Mar 4 00:02:11 kernel: ohci0: [ITHREAD] Mar 4 00:02:11 kernel: usbus0: <ohci (generic)="" usb="" controller=""> on ohci0 Mar 4 00:02:11 kernel: ehci0: <amd cs5536="" (geode)="" usb="" 2.0="" controller=""> mem 0xefffd000-0xefffdfff irq 12 at device 15.5 on pci0 Mar 4 00:02:11 kernel: ehci0: [ITHREAD] Mar 4 00:02:11 kernel: usbus1: EHCI version 1.0 Mar 4 00:02:11 kernel: usbus1: <amd cs5536="" (geode)="" usb="" 2.0="" controller=""> on ehci0 Mar 4 00:02:11 kernel: cpu0 on motherboard Mar 4 00:02:11 kernel: orm0: <isa option="" rom=""> at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0 Mar 4 00:02:11 kernel: atrtc0: <at real="" time="" clock=""> at port 0x70 irq 8 on isa0 Mar 4 00:02:11 kernel: ppc0: parallel port not found. Mar 4 00:02:11 kernel: uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Mar 4 00:02:11 kernel: uart0: [FILTER] Mar 4 00:02:11 kernel: uart0: console (9600,n,8,1) Mar 4 00:02:11 kernel: uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 Mar 4 00:02:11 kernel: uart1: [FILTER] Mar 4 00:02:11 kernel: Timecounter "TSC" frequency 498053454 Hz quality 800 Mar 4 00:02:11 kernel: Timecounters tick every 10.000 msec Mar 4 00:02:11 kernel: IPsec: Initialized Security Association Processing. Mar 4 00:02:11 kernel: usbus0: 12Mbps Full Speed USB v1.0 Mar 4 00:02:11 kernel: usbus1: 480Mbps High Speed USB v2.0 Mar 4 00:02:11 kernel: ugen0.1: <amd> at usbus0 Mar 4 00:02:11 kernel: uhub0: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0 Mar 4 00:02:11 kernel: ugen1.1: <amd> at usbus1 Mar 4 00:02:11 kernel: uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1 Mar 4 00:02:11 kernel: ad0: 3811MB <cf card="" ver6.04=""> at ata0-master PIO4 Mar 4 00:02:11 kernel: Root mount waiting for: usbus1 usbus0 Mar 4 00:02:11 kernel: uhub0: 4 ports with 4 removable, self powered Mar 4 00:02:11 kernel: Root mount waiting for: usbus1 Mar 4 00:02:11 kernel: uhub1: 4 ports with 4 removable, self powered Mar 4 00:02:11 kernel: Trying to mount root from ufs:/dev/ufs/pfsense0 Mar 4 00:02:11 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:02:11 kernel: iwi0: could not load firmware Mar 4 00:02:11 kernel: iwi0: timeout waiting for (null) firmware initialization to complete Mar 4 00:02:11 kernel: iwi0: could not load boot firmware (null) Mar 4 00:02:13 apinger: Starting Alarm Pinger, apinger(32193) Mar 4 00:02:15 php: : ROUTING: setting default route to 192.168.2.1 Mar 4 00:02:17 dhcpd: Internet Systems Consortium DHCP Server 4.2.3 Mar 4 00:02:17 dhcpd: Copyright 2004-2011 Internet Systems Consortium. Mar 4 00:02:17 dhcpd: All rights reserved. Mar 4 00:02:17 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Mar 4 00:02:18 check_reload_status: Updating all dyndns Mar 4 00:02:18 dnsmasq[45450]: started, version 2.55 cachesize 10000 Mar 4 00:02:18 dnsmasq[45450]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP Mar 4 00:02:18 dnsmasq[45450]: reading /etc/resolv.conf Mar 4 00:02:18 dnsmasq[45450]: using nameserver 195.175.39.39#53 Mar 4 00:02:18 dnsmasq[45450]: using nameserver 195.175.39.40#53 Mar 4 00:02:18 dnsmasq[45450]: using nameserver 192.168.2.1#53 Mar 4 00:02:18 dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface Mar 4 00:02:18 dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface Mar 4 00:02:18 dnsmasq[45450]: read /etc/hosts - 2 addresses Mar 4 00:02:20 php: : OpenNTPD is starting up. Mar 4 00:02:21 php: : rc.newwanip: Informational is starting vr1. Mar 4 00:02:21 php: : rc.newwanip: on (IP address: 192.168.2.2) (interface: wan) (real interface: vr1). Mar 4 00:02:21 php: : ROUTING: setting default route to 192.168.2.1 Mar 4 00:02:21 apinger: Exiting on signal 15. Mar 4 00:02:23 check_reload_status: Restarting ipsec tunnels Mar 4 00:02:23 check_reload_status: Reloading filter Mar 4 00:02:23 apinger: Starting Alarm Pinger, apinger(62230) Mar 4 00:02:26 php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.1.100 Mar 4 00:02:26 php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.1.100 Mar 4 00:02:26 sshlockout[258]: sshlockout/webConfigurator v3.0 starting up Mar 4 00:02:28 php: : Resyncing OpenVPN instances for interface WAN. Mar 4 00:02:28 php: : Creating rrd update script Mar 4 00:02:29 php: : Creating rrd update script Mar 4 00:02:33 php: : The command '/usr/bin/killall 'ntpd'' returned exit code '1', the output was 'killall: warning: kill -TERM 51746: No such process' Mar 4 00:02:33 php: : Restarting/Starting all packages. Mar 4 00:02:35 dnsmasq[45450]: reading /etc/resolv.conf Mar 4 00:02:35 dnsmasq[45450]: using nameserver 195.175.39.39#53 Mar 4 00:02:35 dnsmasq[45450]: using nameserver 195.175.39.40#53 Mar 4 00:02:35 dnsmasq[45450]: using nameserver 192.168.2.1#53 Mar 4 00:02:35 dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface Mar 4 00:02:35 dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface Mar 4 00:02:35 php: : OpenNTPD is starting up. Mar 4 00:02:35 php: : pfSense package system has detected an ip change 0.0.0.0 -> ... Restarting packages. Mar 4 00:02:35 check_reload_status: Starting packages Mar 4 00:02:36 login: login on console as root Mar 4 00:02:37 php: : IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing. Mar 4 00:02:41 check_reload_status: Syncing firewall Mar 4 00:02:42 check_reload_status: Reloading filter Mar 4 00:02:43 php: : Restarting/Starting all packages. Mar 4 00:02:48 check_reload_status: Syncing firewall Mar 4 00:02:48 php: /interfaces_assign.php: Creating rrd update script Mar 4 00:03:20 check_reload_status: Syncing firewall Mar 4 00:03:23 apinger: Error while feeding rrdtool: Broken pipe Mar 4 00:03:25 check_reload_status: Syncing firewall Mar 4 00:03:25 php: /interfaces_assign.php: Creating rrd update script Mar 4 00:03:54 php: /interfaces_wireless_edit.php: Cloning new wireless interface iwi0_wlan1 Mar 4 00:03:54 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:03:54 php: /interfaces_wireless_edit.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:03:54 kernel: iwi0: could not load firmware Mar 4 00:04:02 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0 Mar 4 00:04:02 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:04:02 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:04:02 kernel: iwi0: could not load firmware Mar 4 00:04:17 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0 Mar 4 00:04:17 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:04:17 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:04:17 kernel: iwi0: could not load firmware Mar 4 00:04:23 apinger: /usr/local/bin/rrdtool respawning too fast, waiting 300s. Mar 4 00:04:24 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0 Mar 4 00:04:24 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:04:24 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:04:24 kernel: iwi0: could not load firmware Mar 4 00:04:25 check_reload_status: Syncing firewall Mar 4 00:04:25 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0 Mar 4 00:04:25 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:04:25 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:04:25 kernel: iwi0: could not load firmware Mar 4 00:04:27 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0 Mar 4 00:04:27 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:04:27 kernel: iwi0: could not load firmware Mar 4 00:04:27 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:04:27 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0 Mar 4 00:04:27 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:04:27 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:04:27 kernel: iwi0: could not load firmware Mar 4 00:04:27 php: /interfaces.php: The command '/sbin/ifconfig iwi0_wlan0 mode ''' returned exit code '1', the output was 'ifconfig: interface iwi0_wlan0 does not exist' Mar 4 00:04:27 php: /interfaces.php: The command '/sbin/ifconfig iwi0_wlan0 up mode '' ssid 'TEST' protmode 'off' channel any -mediaopt hostap -mediaopt adhoc -hidessid -pureg -puren -apbridge -mediaopt turbo -wme authmode open wepmode off ' returned exit code '1', the output was 'ifconfig: interface iwi0_wlan0 does not exist' Mar 4 00:04:30 kernel: iwi0: timeout waiting for (null) firmware initialization to complete Mar 4 00:04:30 kernel: iwi0: could not load boot firmware (null) Mar 4 00:04:32 dnsmasq[45450]: exiting on receipt of SIGTERM Mar 4 00:04:33 dnsmasq[32818]: started, version 2.55 cachesize 10000 Mar 4 00:04:33 dnsmasq[32818]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP Mar 4 00:04:33 dnsmasq[32818]: reading /etc/resolv.conf Mar 4 00:04:33 dnsmasq[32818]: using nameserver 195.175.39.39#53 Mar 4 00:04:33 dnsmasq[32818]: using nameserver 195.175.39.40#53 Mar 4 00:04:33 dnsmasq[32818]: using nameserver 192.168.2.1#53 Mar 4 00:04:33 dnsmasq[32818]: ignoring nameserver 127.0.0.1 - local interface Mar 4 00:04:33 dnsmasq[32818]: ignoring nameserver 127.0.0.1 - local interface Mar 4 00:04:33 dnsmasq[32818]: read /etc/hosts - 2 addresses Mar 4 00:04:34 dhcpd: Internet Systems Consortium DHCP Server 4.2.3 Mar 4 00:04:34 dhcpd: Copyright 2004-2011 Internet Systems Consortium. Mar 4 00:04:34 dhcpd: All rights reserved. Mar 4 00:04:34 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Mar 4 00:04:34 check_reload_status: updating dyndns opt2 Mar 4 00:04:36 apinger: Exiting on signal 15. Mar 4 00:04:37 check_reload_status: Reloading filter Mar 4 00:04:37 apinger: Starting Alarm Pinger, apinger(38917) Mar 4 00:04:37 php: /interfaces.php: Creating rrd update script Mar 4 00:04:38 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0 Mar 4 00:04:38 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error Mar 4 00:04:38 kernel: iwi_bss: could not load firmware image, error 2 Mar 4 00:04:38 kernel: iwi0: could not load firmware Mar 4 00:05:37 apinger: Error while feeding rrdtool: Broken pipe</cf></amd></amd></amd></amd></at></isa></amd></amd></ohci></ohci></ata></ata></amd></isa></pci-isa></intel(r)></generic></mii></via></generic></mii></via></generic></mii></via></encrypt></pci></host></software></mmx+,3dnow!+,3dnow!></fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>
-
Try this link…
http://forum.pfsense.org/index.php/topic,13427.0.html
-
I don't have any Intel WiFi devices so I'm unable to provide a procedure I know works.
Try this link…
http://forum.pfsense.org/index.php/topic,13427.0.html
I read the link and it is not solution for my problems anythink in in your link
The link provided what seemed to be a necessary condition for loading the firmware (acceptance of the licence). I din't intend to claim that would be sufficient!
added loader.conf
You should add to /boot/loader.conf.local since that file survives firmware upgrades.
if_iwi_load="YES"
wlan_load="YES"
firmware_load="YES"These appear unnecessary since they are apparently already in the kernel.
iwi_bss_load="YES"
iwi_ibss_load="YES"
iwi_monitor_load="YES"I don't know the kernel build options so can't readily say if the corresponding modules are already in the kernel (in which case these lines would not be necessary) or if they are supposed to dynamically loaded as kernel modules (such a load would fail on my recent 2.0.1 install since the corresponding kernel modules (iwi_bss.ko, iwi_ibss.ko and iwi_monitor.ko) are not present in the file system).
legal.intel_iwi.license_ack=1
The man page I linked to says this is necessary.
legal.intel_ipw.license_ack=1
legal.intel_wpi.license_ack=1These appear unnecessary unless you are also using other Intel WiFi devices.
-
Try this link…
http://forum.pfsense.org/index.php/topic,13427.0.html
*.ko files download link broken.
legal.intel_ipw.license_ack=1
legal.intel_wpi.license_ack=1i ll added because system reports give the errors.
how to find iwi_bss.ko, iwi_ibss.ko and iwi_monitor.ko files or how to install new firmware ?