Multiple IPs,trying to setup filtered bridge but firewall rules not working
-
I'm tring to setup Pfsense in front of our hosting environment I have the bridge part working properly from what i can tell from using pfsense in the past.
I can ping fine, dns resolves, the servers can reach the outside world with the proper IP being seen, etc.
The problem I'm having is when i try to allow specific Ports to be passed.
The logs show that the port is being blocked outbound source:2087(inhouse) to destination:50210(internet) TCP:SA
I've tried different ways to get this to pass but obviously not the right way. and not sure if i'm missing a setting somewhere.
What i don't get is why it's blocking outbound traffic when there is a rule to allow all traffic out and it works?Any shed of light on this would greatly help and is much appreciated.
-
ok so i found a bit more info as to my issue. It looks as though the bridge is not setup properly after all.
maybe a layout will help. First Hardware
<router>–---<switch>-------WAN PFsense|
LAN pfsense||
Server1 |||
Server2 ||||Software config
When I use the OPT1 as BRIDGE0 and set LAN as NONE for IP and WAN as NONE for IP, It shuts my network down when i try and access pfsense.
(The way I had it configured in my first post was LAN = BRIDGE0 - WAN static IP.) This was not woking properly.
So what am I missing to setup this bridge?</switch></router>