SCRUB settings
-
Hi,
I am having issues sending attachments. After looking at the logs, I am seeing the following:@1 scrub in on rl0 all min-ttl 255 fragment reassemble
1>I did modify the filter.inc for scrubbing from all to min-ttl 255. No good
2>I also tried creating a rule to allow all https traffic as a test, this did not work. : No good
3>I set static port in OUTBOUND NAT : No good
4>Set the "Clear DF bit" in System>Advanced : No good.After creating the test rule I just did not get log hits that anything was being blocked. Any ways, could some one please give me a hand with this?