Stuck service on services status

georgeman

Exactly. I deleted all entries on the IGMP proxy page, but the it still shows under Status > Services.

Any file I can manually modify?

Thanks a lot!

Best regards

jimp

What version are you running?

georgeman

As per the dashboard it is "2.0.1-RELEASE (i386) built on Mon Dec 12 19:00:03 EST 2011". It is the 4G embedded version, running on an Alix 2D3.

Regards!

jimp

If you take a config backup, open it up in a text editor, find the igmp proxy section, can you attach or paste that here? I don't need to see the whole config, just the part that refers to igmp.

georgeman

As it is right now, the config file is not showing any IGMP section, besides just a closing tab "<igmpproxy>" near the end of the file.

Now, if I manually add some interfaces to the proxy, it comes up this way:

- <igmpproxy>- <igmpentry><ifname>lan</ifname> 
  <threshold><type>upstream</type> 

<address> 
- <descr>-   ]]></descr> 

- <igmpentry><ifname>opt1</ifname> 
  <threshold><type>downstream</type> 

<address> 
- <descr>-   ]]></descr> 

Also, this shows up, which looks interesting:

<revision>- <description>- ]]></description>
<username>admin@172.21.2.2</username>
<time>1351000228</time></revision>


Then, I deleted again the IGMP proxy entries, and exported again. Now it is showing the closing tab at the end, and also:

<revision>- <description>- ]]></description>
<username>admin@172.21.2.2</username>
<time>1351000593</time></revision>


Something looks a little messed up in my config… :-[
</address></threshold></igmpentry> </address></threshold></igmpentry></igmpproxy> 
```</igmpproxy>

jimp

No the revision bit looks right for that page, nothing out of the ordinary there.

What does that <igmpproxy>section look like -exactly- when you have no settings in the list? (By that I mean when the list shows empty in the GUI and it shows in the service list but as stopped).</igmpproxy>

georgeman

Ctrl-F for "igmp" just returns the following line, at the end of the file:

...

And nothing else. There does not seem to be any IGMP "section"

jimp

It's there, it's just empty, as it should be…

In /usr/local/www/status_services.php, around line 313, change this:

if (count($config['igmpproxy']['igmpentry']) > 0) {

to this:

if (is_array($config['igmpproxy']['igmpentry']) && (count($config['igmpproxy']['igmpentry']) > 0)) {

That's what the code does on 2.1 where I know it works right. (Though that whole page has been revamped…)

georgeman

Great, thanks!! That did the trick ;D

I also made the same modification on the services widget file, and now it is showing properly. Check that in 2.1 just in case ;)

Thanks a lot! :)

jimp

It can't be an issue on 2.1 because I moved that code to a common function so the code isn't duplicated between the two pages any longer. So the test only exists in one place, in an .inc file /etc/inc there. :-)