Yate telephony engine on pfsense 2.1 ($ plz quote)
-
i havent tried it coz freebsd is very new for me, gui i dont care much, i just need a few modules running which i can control using telnet etc.
would it be possible to create a bare minimum version without any of the help, docs etc files.
i just use the below modules
accfile
manager
regexroute
sipfeatures
yate
yrtpchan
ysipchan -
As I did never used yate, can you send me/post how to test these features?
-
its simple, first u goto the conf.d folder which r the config for each module, u need to rename each to modulename.conf and basically tog et started u need only the below ones
accfile.conf
manager.conf
regexroute.conf
sipfeatures.conf
yate.conf
yrtpchan.conf
ysipchan.confthen u simply open each and configure as mentioned each of the fields, comments on how to configure r provided. the accfile is where ur userid/pass of remote sip server will go, manager is for telnet acces, regexroute is used for routing calls to gateways etc, sipfeatures u dont need to modify, yate also no change required, yrtpchan is to set ur local ip, port for media in voip calls, ysipchan is used to configure sip related things, such as local ip, port, udp, codecs, etc etc
when u configure these stuff and simply run the yate binary in console, it will read out some stuff which will tell u if something went wrong in locading a module or no, if nothing went wrong its loaded, it will process calls as configured
-
What errors are you getting with package I've published on my repo?
-
i havent tried it coz i dont know how to go about it in freebsd.
-
well, I just…
-
installed it using pkg_add from my repo(as described above)
-
edited /usr/local/etc/rc.d/yate changing from yate_enable=${yate_enable="NO"} to yate_enable=${yate_enable="YES"}
-
exec /usr/local/etc/rc.d/yate start
And it's started with default config options…
671 ?? Ss 0:00.02 /usr/local/bin/yate -Du -d -l /var/log/yate/messages -p /var/run/yate.pid -s
703 ?? S 0:02.91 /usr/local/bin/yate -Du -d -l /var/log/yate/messages -p /var/run/yate.pid -sSupervisor (671) is starting Yate (703) is starting Thu Jan 17 00:30:37 2013 Loaded module Analyzer Loaded module Call Forker Loaded module Call Generator Loaded module CdrBuild Loaded module CdrFile Loaded module Conference Loaded module DumbChannel Loaded module ExtModule Loaded module File Transfer Loaded module GSM - based on libgsm-1.0.10 Loaded module Javascript Loaded module MOH Loaded module MsgSniffer Loaded module MUX Loaded module PBX Loaded module RegexRoute Loaded module RManager Loaded module Speex - based on libspeex-1.1.16 Loaded module ToneDetector Loaded module ToneGen Loaded module WaveFile Loaded module YIAX Loaded module YJingle Loaded module YRTP Loaded module SIP Channel Loaded module YSOCKS Loaded module YSTUN Loaded module ZLib - using zlib library version 1.2.3 Loaded module Accounts from file Loaded module Analog Channel Loaded module Analog Detector Loaded module Cache Loaded module CallCounters Loaded module CCongestion Loaded module Cisco SM Loaded module Clustering Loaded module Cpu Loaded module PBX for database Loaded module DbWave Loaded module Heartbeat Loaded module Late Router Loading module LKSCTP Loaded module MGCP-CA Loaded module MGCP-GW Loaded module Monitoring Loaded module MRCP Loaded module Call Parking Loaded module Presence Loaded module Queues Loaded module Queues Notify Loaded module Registration from file Loaded module Register for database Loaded module SigTransport Loaded module SIP Features Loaded module Subscriptions Loaded module Users Management Loaded module Radius client Loaded module Signalling Channel Loaded module SNMP Agent Loaded module Jabber Server Loaded module Jabber Server Features Initializing plugins Initializing module Jabber Server Features Initializing module Jabber Server Initializing module Subscriptions Initializing module SigTransport Initializing module MGCP Call Agent Initialize module LKSCTP Initializing module DbWave Initializing module Cpu Initializing module Clustering Initializing module Cisco SM Initializing module Analog Detector Initializing module ZLib Initializing module YSOCKS Initializing module MUX Initializing module Javascript Initializing module CdrFile Initializing module Analyzer Initializing module Call Forker Initializing module Call Generator Initializing module CdrBuild Initializing module Conference Initializing module DumbChannel DumbChannel initialized Initializing module ExtModule Initializing module File Transfer Initializing module MOH Initializing module MsgSniffer Initializing module PBX Initializing module RegexRoute Initializing module RManager <rmanager:goon>Failed to bind to 127.0.0.1:5038 : Address already in use Initializing module ToneDetector Initializing module ToneGen Initializing module WaveFile Initializing module YIAX <iaxengine:warn>Failed to bind socket on '0.0.0.0:4569' - trying a random port. 48: 'Address already in use' Initializing module YJingle Initializing module YRTP Initializing module SIP Channel Initializing module YSTUN Initializing module Accounts from file <sip:warn>Listener(UDP,'general') unable to bind on '0.0.0.0:5060' - trying a random port. 48 'Address already in use' Initializing module Analog Channel Initializing module Cache Initializing module CCongestion Initializing module PBX for database Initializing module Late Router Initializing module MGCP Gateway Initializing module Monitoring Initializing module MrcpSpeech Initializing module Call Parking Initializing module Presence Initializing module Queues for database Initializing module Queues Notify Initializing module Register from file Initializing module Register for database Initializing module SIP Features Initializing module Users Management Initializing module Radius client Initializing module Signalling Channel Initializing module SNMP Agent Initialization complete Yate engine is initialized and starting up on pfsense.local <cpuload:stub>System CPU load is not implemented for this OS</cpuload:stub></sip:warn></iaxengine:warn></rmanager:goon>I saw a lot of config options, it may take a while to code into gui and create the config files.
As you can see, default config is unable to bind sockets on pfsense and startup script returns some shell cmd erros too if /usr/local/etc/yate/cdrfile.conf has no file set.
/usr/local/etc/rc.d/yate start usage: dirname string [...] usage: mkdir [-pv] [-m mode] directory_name ... usage: dirname string [...] usage: chown [-fhvx] [-R [-H | -L | -P]] owner[:group] file ... chown [-fhvx] [-R [-H | -L | -P]] :group file ... Starting yate. -
-
ok it seems to run fine i guess looking at the log, would u attempt the latest version which is v4.3 as 2.1 is very old and lack many features and has few bugs related to SIP
-
it will need a port update on freebsd first.
the latest version on ports is yate-4.0.0.p1
-
so would u do that or some1 from freebsd needs to do that as yate is pretty easy to compile i guess
-
regarding the web gui for yate on pfsense, for a start just a start/stop button and text boxes to edit those conf files in yate would be enough, meaning click the conf file and its content load up, then u edit and hit save and the new content gets saved after which just a reload command would apply them immediately. the reason y this coz it would be better than using console or ssh etc and yate is so good that this would be more than enough
-
It has some patches applied on yate freebsd port package. It will need some work to update it. I'll try to contacto it's maintainer.
-
any update on this?
-
-
ports package was updated on feb 15. It still has some bugs but I'll try to compile.
-
package compiled sucessfull.
Can you check if it works the way you need?
i386
e-sac.siteseguro.ws/packages/8/All/yate-4.3.0.p1.tbzamd64
e-sac.siteseguro.ws/packages/amd64/8/all/yate-4.3.0.p1.tbz -
can u plz provide some guide on how to install with commands as im not at all good with freebsd commands
-
i ran pkg_add from shell and i get tons of not found and errors
[2.1-BETA1][root@firewall.xbipin]/root(4): pkg_add http://e-sac.siteseguro.ws/pa ckages/8/All/yate-4.3.0.p1.tbz Fetching http://e-sac.siteseguro.ws/packages/8/All/yate-4.3.0.p1.tbz... Done. Fetching http://e-sac.siteseguro.ws/packages/8/All/expat-2.0.1_2.tbz... Done. Fetching http://e-sac.siteseguro.ws/packages/8/All/cyrus-sasl-2.1.25_1.tbz... Do ne. pkg_add: could not find package db41-4.1.25_4 ! pkg_add: pkg_add of dependency 'cyrus-sasl-2.1.25_1' failed! Fetching http://e-sac.siteseguro.ws/packages/8/All/openldap-sasl-client-2.4.26.t bz... Done. pkg_add: could not find package db41-4.1.25_4 ! pkg_add: could not find package cyrus-sasl-2.1.25_1 ! pkg_add: pkg_add of dependency 'openldap-sasl-client-2.4.26' failed! Fetching http://e-sac.siteseguro.ws/packages/8/All/jpeg-8_3.tbz... Done. Error: Unable to get http://e-sac.siteseguro.ws/packages/8/All/jbigkit-1.6.tbz: Not Found Error: Unable to get http://e-sac.siteseguro.ws/packages/8/All/tiff-4.0.3.tbz: N ot Found Fetching http://e-sac.siteseguro.ws/packages/8/All/db41-4.1.25_4.tbz... Done. -
Amd64?
-
i386
im using pfsense on the alix box using nanobsd
-
i386
im using pfsense on the alix box using nanobsd
can you try to install this package before?
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/cyrus-sasl-2.1.26_2.tbz
All not found messages point to an existing package on repo, I'm not sure what is happening
I'll install a testing vm for it.
