BOUNTY: Web GUI reprogramming

stephenw10

Looks good. :)
I appreciate the fact that you've actually gone and done something as opposed to just talking about it. Keep it up!

Steve

Supermule

Very good! Its not so much for the windows with config that needs redesign, but the dashboard to use the entire width of the screen. But I get where your going and it looks really good.

charlie0440

@Supermule:

Very good! Its not so much for the windows with config that needs redesign, but the dashboard to use the entire width of the screen. But I get where your going and it looks really good.

Well with the changes I have done all pages are now full width

Supermule

What about doing 80%-90% width in the CSS to leave a small edge around everything to make it nicer! ;)

Its more like the number of columns than the actual width of the widget.

charlie0440

Can't remember what they are set to, but if you look at the screenshots they are not 100%

charlie0440

Ok so I only have one issue with this template. It seems a single line of code is messing up the CPU / memory % boxes on the dashoard. Otherwise it looks good

The culprit line:

This line is one of the most important lines for the template so I can't remove it. Not sure why its causing an issue, any ideas?, it makes the boxes really big. It might just need some changes to the index.php file to fix this.

Anyway if anyone wants to have a play / look at what I have so far, download link > https://dl.dropboxusercontent.com/u/12367642/pfsenseGUI.zip I would only try it on 2.0.2/3 not a nightly as I was building against the stable and am sure some changes since will probably have broken it.

Installation Instructions:

1. Extract the zip to a folder on your PC
2. Backup the original files on your pfsense box

These files will be replaced so make a copy:
/usr/local/www/fbegin.inc
/usr/local/www/fend.inc
/usr/local/www/head.inc
/usr/local/www/widgets/widgets/system_information.widget.php

I find it easiest to ssh in and just do a cp command ie:
cp /usr/local/www/fbegin.inc /usr/local/www/fbegin_bk.inc

If your on a read only build dont forget to run this command first:
/etc/rc.conf_mount_rw

3. Copy the files to pfsense

Easiest way is via scp on linux, you could copy and paste via the edit file on the webGUI

linux:
replace with your ip address (here I am copying the contents of the pfsenseGUI folder from the zip)

scp pfsenseGUI -r * root@192.168.1.1:/usr/local/www

4. Open up the webGui and login to see the changes

To revert back to the original files:

To revert to the original files you need to restore the backed up files to their original name ie:
mv /usr/local/www/fbegin_bk.inc /usr/local/www/fbegin.inc
etc

optional delete this folder:
/usr/local/www/assets

Please provide feedback (im looking at stephen here, he loves getting his hands dirty)

Edit: you can change the theme in the general settings but it will only effect the background color :(

Edit 2: had a thought the dashboard issue may just be a conflicting class name. I'll investigate it tonight

charlie0440

Another update, solved the dashboard problem, I had to implement new progress bars (they are blue unless you go over 90% then they are red).

They all work, although the CPU progress bar causes some of the dashboard to hang 1-2secs before rendering

Updated zip file available here: https://dl.dropboxusercontent.com/u/12367642/pfsenseGUI.zip.

Screenshots here: http://cubeupload.com/codes/38b032

marcelloc

Charlie, did you kept autosize/scroll menu?

xbipin

y not change the table header background to blue as well, it would flow better with the layout and color change

charlie0440

@marcelloc:

Charlie, did you kept autosize/scroll menu?

Not aware I have touched or come across any scrollbar functions. Are you having an issue? If so please describe, provide a screenshot

@xbipin:

y not change the table header background to blue as well, it would flow better with the layout and color change

I haven't really begun to style this yet ;) I didn't intend to redo the progress bars, but they were broken with my template so I had to fix them.

My plan is to get a 100% working full screen template by editing as little code as possible. Once that is complete, I can move on to changing colors, styles and maybe create some themes. I can also look at styling/changing on a per page basis which would then allow some for cool features.

This brings me on to what I hope is the only existing issue, which unfortunately is a big one! I need some help as I don't know where to begin fixing this. I've noticed in its currently state the menus work great but its broken the csrf checks. You can see this by going to Diagnostics > System Activity. Now this can be fixed by removing the import of the jquery file I have been using (downloaded from the jquery website), remove this line and the csrf works:

BUT it then breaks the menu, they are no longer dropdown!

This is stuff I know nothing about, if I am correct pfsense 2.0.x uses "scriptaculous" instead of jquery? In pfsense master it has a custom jquery found here:
/ usr / local / www / javascript / jquery

I tried importing that custom jquery instead but the menus still don't work.

Can anyone help here? Its key, if I can get over this it will open the door to a possible complete redeisgn

charlie0440

~~another update. Got the csrf working :), just the table is not being displayed :(~~

^^ that causes the interfaces pages not to render properly. Again jquery related I assume? As it only shows the enable interface box and not all the info. This is a function show_allcfg inside a javascript tag on the interfaces.php page.

its either have a working csrf code, or lose some of the gui, dependent on the placement of the import jquery line.

I'm guessing the jquery file needs amending, I can't figure it out

I'm outta my depth here!

marcelloc

@charlie0440:

Not aware I have touched or come across any scrollbar functions. Are you having an issue? If so please describe, provide a screenshot

Not at all, it's just a feature on 2.1 that was a long time issue.

charlie0440

~~ahh i give up. I restored the original files so I was back at a stock looking pfsense. By adding this single line to either the head.inc or the fbegin.inc its breaking loads:~~

http://cubeupload.com/im/2ZSreG.png

Do you notice anything odd? enable interface is ticked but nothing is displayed. Also the csrf breaks with this one line. It must be conflicting with another js file but I don't know where to begin. Are there no devs readings this thread, who can at least point me in a direction? The plan was a twitter bootstrap template which requires jquery. I have no idea if this is a big issue to fix or a newbie oversight on my behalf.

Edit: Drama over, I ditched 2.0.x and have moved to building against a 2.1 nightly its all seems to be working fine ;D

charlie0440

RIght working template for 2.1 (tested on a nightly from 2/5/13)

Installation Instructions:

1. Extract the zip to a folder on your PC
2. Backup the original files on your pfsense box

These files will be replaced so make a copy:
/usr/local/www/fbegin.inc
/usr/local/www/fend.inc
/usr/local/www/head.inc
/usr/local/www/widgets/widgets/system_information.widget.php

3. Copy the files to pfsense
From within the pfmaster folder:
scp -r * root@192.168.0.25:/usr/local/www

replace with your ip address

4. Open up the webGui and login to see the changes

To revert back to the original files:

You need to restore the files you backed up in step 1 to their original name ie:
mv /usr/local/www/fbegin_bk.inc /usr/local/www/fbegin.inc

etc..

optional delete this folder:
/usr/local/www/assets

–--------------------------------

Some screenshots > http://cubeupload.com/codes/38bfda

Please provide feedback. Is it worth me making a start on all the pages? I have only edited the template and not the individual pages. I don't want to get stuck in to find its going to be obsolete as someone else is redesigning. I read on another post about a possible kickstarter project.

Edit: If all that is needed is some tidying up as opposed to redesigning then it should be straight forward, all being time consuming. Just spend 5 mins on the arp page (again yet to style it with any css) just tidied it up a little, some screenshots (before and after) > http://cubeupload.com/codes/229c3f

charlie0440

Some before and after images of an example wol page (again no css styling yet ie colouring leaving that to the end) > http://imgur.com/a/xxIzs

stephenw10

Can't argue with that example. :)
Nice job.

Steve

charlie0440

and we can do some cool jquery for our phones and tablets > screenshot http://cubeupload.com/im/3bM0qR.png

Still needs some work there's far too much padding on the left. But then I haven't even looked at any css yet.

Edit: changed the screenshot it was showing the mobile version (we needed the desktop version as I haven't changed any mobile code, if that makes sense)

charlie0440

Not had much time recently to play with this. I did notice I broke a few things with the my last code changes.

So here is a new zip (for 2.1) > https://dl.dropboxusercontent.com/u/12367642/wip.zip

Fixed:
Drag and drop of widgets on the dashboard now works
Unread messages (acknowledgements) are now shown

Installation Instructions:

1. Extract the zip to a folder on your PC
2. Backup the original files on your pfsense box

These files will be replaced so make a copy:
/usr/local/www/fbegin.inc
/usr/local/www/fend.inc
/usr/local/www/head.inc
/usr/local/www/guiconfig.inc
/usr/local/www/widgets/widgets/system_information.widget.php
/usr/local/www/javascript/jquery.js

3. Copy the files to pfsense
From within the wip folder:
scp -r * root@192.168.0.25:/usr/local/www

replace with your ip address

–------------------

I started to look at the dashboard page. I managed to split it into three columns but am struggling to make the third droppable.

snazy2000

Hey guys

I saw this post a few days ago and thought i would have ago. I still have loads of work to do to but here a start.
Ive got few more icons to put in (at the top) im also going to change the interfaces widget and the sys info widget to match the themes of the others.

Ive also got to do some of the other pages heres what ive done so far

Tabs
Boostrap text boxes
got rid of the icon in the boxes changed all the buttons to boostrap buttons

Untitled.png_thumb

Untitled2.png_thumb

charlie0440

@snazy2000 good work! Do you use github. There's no point two of us working on different projects. I too played with the dashboard today