Squid 3.3.4 package for pfsense with ssl filtering

wheelz

Is it possible to run squid as explicit on one interface (like loopback or LAN) and also run it as transparent on a different interface like a guest net at the same time?

marcelloc

@wheelz:

Is it possible to run squid as explicit on one interface (like loopback or LAN) and also run it as transparent on a different interface like a guest net at the same time?

On squid3-dev yes ;D

Remember to do not use loopback on any configuration while using transparent mode.

iodaddio

@wheelz:

@marcelloc:

@wheelz:

/libexec/ld-elf.so.1: /usr/lib/librt.so.1: unsupported file layout

on 2.0.3, use pkg_add and pkg_delete to get squid 3.3.5

i386
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/squid-3.3.5.tbz

amd64
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/squid-3.3.5.tbz

Hmm… that's what I did. It complained about perl and openssl (I think) so I deleted them and let the pkg_add -r install the versions it wanted. After that it was successfull, however squid -v won't run with the error above.

When I do that, it complains that perl is the wrong version.

marcelloc

@iodaddio:

When I do that, it complains that perl is the wrong version.

check all dependent libs from the beginning of this topic. The manual update works fine if applied on with same architecture as operating system.

stanthewizard

I got this when I start Squid (that stops immediatly)

Jun 6 19:56:59 squid: No valid signing SSL certificate configured for https_port 127.0.0.1:443
Jun 6 19:57:04 php: /status_services.php: The command '/usr/local/etc/rc.d/squid.sh stop' returned exit code '1', the output was '2013/06/06 19:56:59| ERROR: Directive 'ignore_expect_100' is obsolete. FATAL: No valid signing SSL certificate configured for https_port 127.0.0.1:443 Squid Cache (Version 3.3.5): Terminated abnormally. CPU Usage: 0.013 seconds = 0.000 user + 0.013 sys Maximum Resident Size: 34816 KB Page faults with physical i/o: 0'
Jun 6 19:57:06 squid: No valid signing SSL certificate configured for https_port 127.0.0.1:443

marcelloc

@stanthewizard:

I got this when I start Squid (that stops immediatly)

What config are you using? reverse proxy? normal proxy? did you configured a valid CA for squid?

While using transparent proxy, do not select loopback interface.

stanthewizard

I have removed 3.3.4

I followed your commands line for 3.3.5. But no squid … after reinstallation, I'll see if I still have the error message.

Thanks for your help

marcelloc

@stanthewizard:

I followed your commands line for 3.3.5. But no squid … after reinstallation, I'll see if I still have the error message.

fill ssl fields (port, etc) and save config.

check if all libs are there with squid -v

stanthewizard

I don't understand
squid -v give me a lot of file.

but no squid in menu or packages :-X

marcelloc

@stanthewizard:

I don't understand
squid -v give me a lot of file.

but no squid in menu or packages :-X

The upgrade process from 3.3.4 to 3.3.5 is only on console. You do not need to remove squid3-dev package on gui.

stanthewizard

Damned

How do I reinstall the console ?

Thanks

stanthewizard

On one of the Pfsense 2.1RC0 … I nailed the SSL Certificat culprit.
The service is UP with this in the log:

php: /status_services.php: The command '/usr/local/etc/rc.d/squid.sh stop' returned exit code '1', the output was '2013/06/07 08:02:02| ERROR: Directive 'ignore_expect_100' is obsolete. squid: No running copy'

marcelloc

@stanthewizard:

How do I reinstall ~~the~~ on console ?

Reinstall package squid3-dev via gui.

Go to console/ssh, remove with pkg_delete squid-3.3.4 and install using pkg_add squid-3.3.5.

@stanthewizard:

ERROR: Directive 'ignore_expect_100' is obsolete. squid: No running copy'

I've pushed a fix with no version bump. a package reinstall should fix it.

If you what to just manual update it, run these two fetch cmd on console

fetch -o /usr/local/pkg/squid_reverse.inc https://raw.github.com/pfsense/pfsense-packages/8ba97bb7780495943c2d50547514d5b388d06329/config/squid3/33/squid_reverse.inc
fetch -o /usr/local/pkg/squid_reverse_general.xml https://raw.github.com/pfsense/pfsense-packages/8ba97bb7780495943c2d50547514d5b388d06329/config/squid3/33/squid_reverse_general.xml

stanthewizard

Aouch

with pkg_add

pkg_add: can't stat package file 'squid-3.3.5'

:-\

marcelloc

@stanthewizard:

pkg_add: can't stat package file 'squid-3.3.5'

white url are you using to fetch squid 3.3.5?

stanthewizard

sorry I don't understand

I think I have no specific url

marcelloc

@stanthewizard:

sorry I don't understand

On console/ssh use pkg_delete to remove squid-3.3.4 and pkg_add to get squid 3.3.5

i386 systems
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/squid-3.3.5.tbz

amd64 systems
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/squid-3.3.5.tbz

stanthewizard

OK

I installed it … but nothing in the GUI packages ...

Did I do something wrong ?

marcelloc

@stanthewizard:

Did I do something wrong ?

You forgot to install squid3-dev package before doing pkgdell/add on console.

stanthewizard

At last It works

Thanks

BTW
with squid 3.3.5 there is a bug in 2.1 RC0 … endless loop updating package