Squid 3.3.4 package for pfsense with ssl filtering

Nachtfalke

Maybe with a lot of acls based on source ip acls to define tcp_outgoing address.

I'm seeing some posts related to problems with 127.0.0.1 load balance on 2.1

Interesting point. tcp_outgoing_address and ACL with source IP and source port 443 could do the trick. 3 tcp_outgoing each for every of the 3 WAN connection. Port 80 can be probably done with the gateway groups of pfsense in Manual Outbound NAT. Will give that a try.

ipis

Hi marcelloc. Does this version capable of blocking https sites in transparent mode?

Nachtfalke

@ipis:

Hi marcelloc. Does this version capable of blocking https sites in transparent mode?

Yes.

ipis

Thanks natchflake. I'm trying to download squid-3.3.5 from the above address given by marcelloc using also the procedure as instructed, but i'wasn't able to download it. It says Unable to fetch the file. Can I download it manually and save it in any pfsense folder using file manager packages? IF yes how can i install it once i've save it? for example i saved it to /usr/local..

Thanks

Nachtfalke

@ipis:

Thanks natchflake. I'm trying to download squid-3.3.5 from the above address given by marcelloc using also the procedure as instructed, but i'wasn't able to download it. It says Unable to fetch the file. Can I download it manually and save it in any pfsense folder using file manager packages? IF yes how can i install it once i've save it? for example i saved it to /usr/local..

Thanks

Hi,

please try to install squid3-dev form pfsense package manager. This will give you all you need. After that you have to fetch some single files from command shell. This should be enough.

This post should explain it:
http://forum.pfsense.org/index.php/topic,62256.msg371582.html#msg371582

At the moment I do not find the post where marcelloc posted all the missing libs/files you need to fetch manually.

marcelloc

for amd64


fetch -o /usr/local/lib/libasn1.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libasn1.so.10
fetch -o /usr/local/lib/libgssapi.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libgssapi.so.10
fetch -o /usr/local/lib/libheimntlm.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libheimntlm.so.10
fetch -o /usr/local/lib/libhx509.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libhx509.so.10
fetch -o /usr/local/lib/libkrb5.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libkrb5.so.10
fetch -o /usr/local/lib/libroken.so.10 http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libroken.so.10

for i386

fetch -o /usr/local/lib/libasn1.so.10 http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libasn1.so.10
fetch -o /usr/local/lib/libgssapi.so.10 http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libgssapi.so.10
fetch -o /usr/local/lib/libheimntlm.so.10 http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libheimntlm.so.10
fetch -o /usr/local/lib/libhx509.so.10 http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libhx509.so.10
fetch -o /usr/local/lib/libkrb5.so.10 http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libkrb5.so.10
fetch -o /usr/local/lib/libroken.so.10 http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libroken.so.10

You can also fetch from any frebsd 8.3

ipis

Hi nachtfalke

Sorry I'm mean this url http://e-sac.siteseguro.ws/packages/8/All/squid-3.3.5.tbz

I wasn't able to get the missing libs. to make squid working and squidguard too

Nachtfalke

@ipis:

Hi nachtfalke

Sorry I'm mean this url http://e-sac.siteseguro.ws/packages/8/All/squid-3.3.5.tbz

I wasn't able to get the missing libs. to make squid working and squidguard too

Did you see the post marcelloc posted on top of your post?

ipis

Hi, while i continue reading

I'v found this instructed by marcelloc to other member.

. cd /usr/local/lib
. fetch url_for_libs

Download all libs from my ldd folder.

What doe's he mean by the "fetch url_for_libs" ?

Because what I tried is this on console "fetch //http://e-sac.siteseguro.ws/pfsense/8/All/ldd/"

and it says not found. Did I do it correctly?

ipis

Sorry I didn't see it earlier.

Thanks Nachtfalke and marcelloc :)

marcelloc

@ipis:

Sorry I'm mean this url http://e-sac.siteseguro.ws/packages/8/All/squid-3.3.5.tbz

No need to fetch 3.3.5. Use default 3.3.8 from oficial repository.

ipis

Guys what i did was this to be exact

(8) shell
cd /usr/local/lib
fetch -o /usr/local/lib/libasn1.so.10 http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libasn1.so.10

But it says not found.

I feel ashamed cause i wasn't able to install them while others can :(

ipis

Is there a way to copy the missing libs directly to the pfsense without fetching?

marcelloc

@ipis:

Is there a way to copy the missing libs directly to the pfsense without fetching?

Unfortunately no. I've asked core team to copy these libs to official repo but I had no luck with that.

These are missing so libs for gssapi. Other packages(freeradius2, postfix) need this libs too.

ipis

I hope all missing libs are included soon. I really wan't to block certain secured sites on my work. And I think this version is amazing.

Does anyone has a workaround in fetching libs?

Nachtfalke

@ipis:

I hope all missing libs are included soon. I really wan't to block certain secured sites on my work. And I think this version is amazing.

Does anyone has a workaround in fetching libs?

Just try with this command:

cd /usr/local/lib

and in this folder:


fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libasn1.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libgssapi.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libheimntlm.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libhx509.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libkrb5.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libroken.so.10

Perhaps you have to check the file permissions after you copied the files.

Or download the libs via your webbrowser and copy these files to pfsense using the GUI:
DIAGNOSTICS –> Command Prompt

ipis

Thanks Nachtfalke

How stupid i'am. I a'm using the word "ALL" instead of "All" plus. I erase all my config to squid, I uncheked everything before re-fetching. Thanks again :)

ipis

Hi. Its already working fine but I've noticed that the other browser like google chrome. I've noticed that it wont trust the certificate when entering into secured sites. It says the Certificate is not trusted and theres no option for the user to continue and accept it. Unlike to other browser theres an optio to get the certificate and continue to the website. Or to trust the cerficate.. Is this normal, or theres a way to overcome this? Thanks

marcelloc

@ipis:

Is this normal, or theres a way to overcome this? Thanks

Yes, to avoid these erros, play with squid cert options and include pfsense CA as a trusted CA on each browsers. This way you will not get any ssl error for https sites.

Services that use same ssl port(tor, ultrasurf) will always fail.

ipis

Thanks marcelloc. I've fixed the certificated error. also I re-enabled the transparent ssl and it helps :)