Squid 3.3.4 package for pfsense with ssl filtering

keyser

I think you and I discussed this Terminal Services Gateway Issue before since I wanted that to work as well.

Are you saying it works now with the Squid 3.3.8-Dev package? (Using your additional instructions)?

Can you upgrade from the Squid 3.1.20 package to the 3.3.8-dev, or do I need to recreate all the settings from square one again?

-Keyser

marcelloc

@keyser:

Can you upgrade from the Squid 3.1.20 package to the 3.3.8-dev, or do I need to recreate all the settings from square one again?

Do not forget to check -dev dependences before upgrading.

Most options are the same but I suggest you to check all tabs after upgrading it.

keyser

Marcelloc

How do i do the upgrade? i can't seem to find a way to click upgrade in the package manager, and the new one only offers to install (will that automatically upgrade the old one?)

marcelloc

uninstall squid3 and then install squid3-dev

ncolunga

Nice work, it's a great addition to pfsense and works very well. Is this going to be implemented on the squid3 "normal" package too?

marcelloc

squid3-dev will be squid3 when finished.

Dipouss

Hi everyone. I am using Squid3-dev (3.3.8 ) and squidGuard-squid3. Everything is ok in transparent mode on http and https (Thanks to Marcelloc ;) ).
But you said it was possible to use both transparent and authentication with squid3-dev:

@marcelloc:

@wheelz:

Is it possible to run squid as explicit on one interface (like loopback or LAN) and also run it as transparent on a different interface like a guest net at the same time?

On squid3-dev yes ;D

Remember to do not use loopback on any configuration while using transparent mode.

I have tried and it does not work for me: I use 2 interfaces on the same LAN with a different IP address for each one (192.168.1.254 and 192.168.1.253). I have selected the both for "Proxy interface(s)" in "Squid General Settings".
In 'Transparent Proxy Settings" and "SSL man in the middle Filtering", just the 192.168.1.254 is selected. When I use this interface for the web navigation, it is ok, the transparent mode is working.
But if I explicitly use the 192.168.1.253 (not selected in transparent mode), the proxy doesn't ask me for authentication.

These are the squid.conf first lines:

http_port 192.168.1.254:3128 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=10MB cert=/usr/pbi/squid-i386/etc/squid/serverkey.pem capath=/usr/pbi/squid-i386/share/certs/

http_port 192.168.1.253:3128
http_port 127.0.0.1:3128 intercept ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=10MB cert=/usr/pbi/squid-i386/etc/squid/serverkey.pem capath=/usr/pbi/squid-i386/share/certs/

https_port 127.0.0.1:3129 intercept ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=10MB cert=/usr/pbi/squid-i386/etc/squid/serverkey.pem capath=/usr/pbi/squid-i386/share/certs/

I don't know why the IP is 127.0.0.1 for the "intercept" and not juste the 192.168.1.254, even if I suppose it is normal. Have I to edit manually the squid.conf? Is there someone using both transparent and anthentication on 2 different interfaces? Could someone help me please?

NetWiz

Hope it will be soon release. But last time I roll back from -dev version of Squid. To much problem for the first time using of pfSense.

exograpix

There is another issue, I am not able to auth through captive portal and provide different acl to various groups. May be I doing something wrong, please post the right procedure to do it.

Thanks in advance

marcelloc

@exograpix:

There is another issue, I am not able to auth through captive portal

Did you applied captive portal patch on squid config?

@exograpix:

and provide different acl to various groups.

Are you doing it with custom options?

exograpix

I feel it is sorted now, yes captive portal is set as auth medium in squid, I have now added groups and username in the squidguard group acl, seems to be working.

Another issue is i am not able to configure antivirus with squid3-dev and neither with havp package.

NetWiz

How to check pf operational after squid-dev removal? I also had patches for it and HAVP. I don't see any garbage in webgui, but I see some trash from old package in configs. Now I have one headache - ipcad doesn't report to access.log. If client goes on proxy-port 3128 it's traced in logs. Direct connections - not.

titus91360

Hi Marcelloc

I just installed a test machine with pFsense 2.1 Release, squid3-dev and squidGuard-squid3.
I can't start squidguard service, but can't find why.

In logs, here is my error message:

pfSense php: /pkg_edit.php: The command '/usr/pbi/squid-amd64/sbin/squid -k reconfigure -f /usr/pbi/squid-amd64/etc/squid/squid.conf' returned exit code '1', the output was 'squid: ERROR: No running copy'

Any Idea ?

Pankar

Hi,

I have read this thread and several topics/tutorials on the web but I still cant figure out whether Squid3 and especially 3.3.8-dev is able to cach dynamic content.

I understand that 3.3.8-dev has solved an issue on squid3 stable where enabling dynamic content wouldn't let anything to cache: I have enabled dynamic content on 3.3.8 and static content (pictures, etc) is caching correctly.

However, enabling dynamic content doesnt seem to serve its purpose: cache any URL that includes a ? (it returns a TCP_MISS/200)

This is my squid.conf. My main goal is to cache iOS updates and ibooks since I am a school IT Manager and there are 50+ identical ibook downloads per day through the iTunesU platform. The iBook URLS are like:

http://.phobos.apple.com///*/example.ibooks?downloadKey=12345678

# This file is automatically generated by pfSense
# Do not edit manually !

http_port 10.0.10.2:3128
http_port 127.0.0.1:3128 intercept
icp_port 7
dns_v4_first off
pid_filename /var/run/squid.pid
cache_effective_user proxy
cache_effective_group proxy
error_default_language el
icon_directory /usr/pbi/squid-i386/etc/squid/icons
visible_hostname localhost
cache_mgr admin@localhost
access_log /var/squid/logs/access.log
cache_log /var/squid/logs/cache.log
cache_store_log none

logfile_rotate 30
shutdown_lifetime 3 seconds
# Allow local network(s) on interface(s)
acl localnet src  10.0.0.0/16
httpd_suppress_version_string on
uri_whitespace strip

# Windows Update refresh_pattern
range_offset_limit -1
refresh_pattern -i microsoft.com/.*\.(cab|exe|ms[i|u|f]|asf|wm[v|a]|dat|zip) 4320 80% 43200 reload-into-ims
refresh_pattern -i windowsupdate.com/.*\.(cab|exe|ms[i|u|f]|asf|wm[v|a]|dat|zip) 4320 80% 43200 reload-into-ims
refresh_pattern -i my.windowsupdate.website.com/.*\.(cab|exe|ms[i|u|f]|asf|wm[v|a]|dat|zip) 4320 80% 43200 reload-into-ims
refresh_pattern -i ([^.]+.|)(appldnld|update).(apple.|)com/.* 43200 100% 43200 ignore-reload ignore-no-store override-expire override-lastmod ignore-must-revalidate
refresh_pattern -i ([^.]+.|)(phobos).(apple.|)com/.*\.(zip|ibooks|ipa) 10080 100% 10080 ignore-reload ignore-no-store override-expire override-lastmod ignore-must-revalidate

cache_mem 1600 MB
maximum_object_size_in_memory 4096 KB
memory_replacement_policy lru
cache_replacement_policy heap LFUDA
cache_dir ufs /var/squid/cache 30000 16 256
minimum_object_size 0 KB
maximum_object_size 2048000 KB
offline_mode off
cache_swap_low 90
cache_swap_high 95
cache allow all

# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:    1440  20%  10080
refresh_pattern ^gopher:  1440  0%  1440
refresh_pattern -i (/cgi-bin/|\?) 0  0%  0
refresh_pattern .    0  20%  4320

# No redirector configured

#Remote proxies

# Setup some default acls
# From 3.2 further configuration cleanups have been done to make things easier and safer. The manager, localhost, and to_localhost ACL definitions are now built-in.
# acl localhost src 127.0.0.1/32
acl allsrc src all
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901  3128 3127 1025-65535 80 443
acl sslports port 443 563  443

# From 3.2 further configuration cleanups have been done to make things easier and safer. The manager, localhost, and to_localhost ACL definitions are now built-in.
#acl manager proto cache_object

acl purge method PURGE
acl connect method CONNECT

# Define protocols used for redirects
acl HTTP proto HTTP
acl HTTPS proto HTTPS
acl allowed_subnets src 10.0.5.1/24 10.0.10.2/24
http_access allow manager localhost

# Allow external cache managers
acl ext_manager src 10.0.10.2
http_access allow manager ext_manager

http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports

# Always allow localhost connections
# From 3.2 further configuration cleanups have been done to make things easier and safer. 
# The manager, localhost, and to_localhost ACL definitions are now built-in.
# http_access allow localhost

quick_abort_min -1 KB
quick_abort_max 0 KB
quick_abort_pct 20
request_body_max_size 0 KB
delay_pools 1
delay_class 1 2
delay_parameters 1 -1/-1 -1/-1
delay_initial_bucket_level 100
delay_access 1 allow allsrc

# Reverse Proxy settings

# Custom options

# Setup allowed acls
# Allow local network(s) on interface(s)
http_access allow allowed_subnets
http_access allow localnet
# Default block all to be sure
http_access deny allsrc

Do you have any suggestion? Would it be wise to uninstall 3.3.8-dev and then install Squid 2.7 and manually add the refresh_patterns found in older tutorials?

Thanks in advance,

Panos

exograpix

Is there is any way to run havp with squid-dev package, squid is working ok, but without antivirus, it is bit incomplete, please suggest.

marcelloc

IMHO, havp is old and obsolete but if you are not using ssl filtering, you may configure the same way you do on squid2

I'm working to get antivirus tab working for this -dev version.

exograpix

Any alternate antivirus working with ssl filtering.

marcelloc

@exograpix:

Any alternate antivirus working with ssl filtering.

Not yet.

Pankar

Hello,

I have installed 3.3.8-dev and reinstalled lightsquid.

Problem is that the Proxysquid realtime stat, is either not showing client sessions at all, or, when it does, the list lines remain null and the following warning occurs several times (as many as the sessions):

gethostbyaddr(): Address is not a valid IPv4 or IPv6 address in /usr/local/www/sqstat/sqstat.class.php on line 426

Has anyone seen that before?

Thank you in advance.

ccarreraalza

I have a question.
I'm using squid 3.3.8-devel, well, when I go to facebook page shows me the warning I give exception and shows me confirm the facebook page but incompletely, as well as also the paypal page, and this because it is within the site of faccebook or https paypal there are other pages that are to be displayed, but they all come with an X.

as could validate the certificate on them to the web page or paypal facebook full display?

thanks

Google translator, sorry not mastered the English perfectly