PfSense as a transparent firewall
-
Hi all,
I've build the following structure:
|---------| | WAN | |---------| | WAN-IP/24 | | |---------| | Switch | |---------| | | | bge0 (VLAN 50) |---------| | pfSense |-------- xl0 (Mgmt-LAN) |---------| | bge1 (VLAN 600) | | |---------| | Switch | |---------| | | | eth0 (VLAN 600) |-----------| | PC | | WAN-IP-1 | |-----------|
I've assigned 3 interfaces:
-
WAN - VLAN 50 on bge0
-
LAN - VLAN 600 on bge1
-
Mgmt - xl0
Then I created a bridge (and if) between WAN and LAN.
All interfaces with config-type "None" and a firewall-rule "Any 2 Any"Finally I assigned a WAN-IP-Address to my computer and try to become an answer from the gateway (on the WAN side) - without any success.
Do anyone have any idea; what's wrong?
Many thanks in advance
Best Regards
craCH -
-
No idea?
-
System tuneables correct set and NAT fully disabled? Is the pfSense machine real or virtual?