Taming the beasts… aka suricata blueprint
-
In the script, pfiprep,
There is a line 210, pfupdate=yes
Can you confirm if that is set to "yes"
After the Alias Table list, you will see something that looks like this that shows pfctl Updating the Alias Tables:
**Updating [ IR_PRI1 ] [ ET_IPrep ET_Comp ET_Block Spamhaus_drop Spamhaus_edrop Spamhaus_CC CIArmy AbuseZeus AbuseSpyeye AbusePalevo dShield_Top dShield_Block SnortBL ISC_top10 Snort64 ]
94 addresses added.Updating [ IR_PRI2 ] [ ALIENVAULT Atlas_Attacks Atlas_Botnets Atlas_Fastflux Atlas_Phishing Atlas_Scans Atlas_SSH SRI_Attackers SRI_CC HoneyPot ]
48 addresses added.
61 addresses deleted.No Updates [ IR_PRI3 ]
No Updates [ IR_SEC1 ]
No Updates [ IR_SEC2 ]
No Updates [ IR_SEC3 ]
No Updates [ IR_IB ]
No Updates [ IR_TOR ]
No Updates [ IR_MAIL ]
No Updates [ IR_CC ]**
-
this looks right…..
-
it looks right…..
update was set to yes....
Updating [ IR_PRI1 ] [ ET_Comp ET_Block Spamhaus_drop Spamhaus_edrop CIArmy AbuseZeus AbuseSpyeye AbusePalevo dShield_Top dShield_Block SnortBL ISC_top10 ] 813 addresses added. Updating [ IR_PRI2 ] [ ALIENVAULT Atlas_Attacks Atlas_Botnets Atlas_Fastflux Atlas_Phishing Atlas_Scans Atlas_SSH SRI_Attackers SRI_CC HoneyPot ] 25533 addresses added. 90 addresses deleted. No Updates [ IR_PRI3 ] No Updates [ IR_SEC1 ] No Updates [ IR_SEC2 ] No Updates [ IR_SEC3 ] No Updates [ IR_IB ] No Updates [ IR_TOR ] No Updates [ IR_MAIL ] No Updates [ IR_CC ]looks like the mouseover thing is wrong, to me at least.
-
Make sure you created the Alias URL Tables correctly. Cino posted his setup here
https://forum.pfsense.org/index.php?topic=78062.msg427132#msg427132
-
yeah, there's where I copied the setup from, its been a long day so its completely possible Ive screwed something up but it seems basic enough (isn't this where all errors are made, the easy stuff!?)
each rule looks like this….
Edit: Hang on: it says use small IP lists under 3000 there….
and the alias page looks like this.....(not sure why mine shows a section of the data under each rule mind.....version difference with 2.1.4?)
-
We all make mistakes and I think the issue is that you created a "URL" Alias instead of a "URL Table" Alias.
When its a URL, it has a max amount of IPs that it can hold.
You should also keep the Description the same as the Alias Name, so its easier to see in the Logs and Rules GUI.
Easy Fix… ;)
-
you are right…..knew it would be a newb mistake :-[
thanks for your help this evening....and again, thanks for all the work you've put into this. -
My pleasure! Keep those Bastards out of your Network…. 8)
-
Sorry….me again :)
I've just ploughed through configuring Suricata and have a few issues in the log I was curious about understanding, are these anything I should worry about or just disable these rules?
FYI: I'm running this with jflsakfja's suggested list and the ETFree list (want to try this out before coughing up some serious coin (compared to VRT home licence) for the ETPro list.<snip>2/7/2014 -- 18:16:11 - <error>-- [ERRCODE: SC_ERR_WITHIN_INVALID(106)] - within argument "-4" is less than the content length "4" which is invalid, since this will never match. Invalidating signature 2/7/2014 -- 18:16:11 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $EXTERNAL_NET any <> $HOME_NET any (msg:"ET POLICY hidden zip extension .pif"; flow:established; content:"|50 4b 03 04|"; byte_jump:2,22,relative,little, post_offset +2; content:".pif"; within:-4; reference:url,doc.emergingthreats.net/2001407; classtype:suspicious-filename-detect; sid:2001407; rev:11;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_43304_igb0/rules/suricata.rules at line 4808 2/7/2014 -- 18:16:11 - <error>-- [ERRCODE: SC_ERR_WITHIN_INVALID(106)] - within argument "-4" is less than the content length "4" which is invalid, since this will never match. Invalidating signature 2/7/2014 -- 18:16:11 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $EXTERNAL_NET any <> $HOME_NET any (msg:"ET POLICY hidden zip extension .scr"; flow:established; content:"|50 4b 03 04|"; byte_jump:2,22,relative,little, post_offset +2; content:".scr"; within:-4; reference:url,doc.emergingthreats.net/2001408; classtype:suspicious-filename-detect; sid:2001408; rev:12;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_43304_igb0/rules/suricata.rules at line 4809 2/7/2014 -- 18:16:13 - <error>-- [ERRCODE: SC_ERR_PCRE_COMPILE(5)] - pcre compile of ""/(obj.data|\object.data).+file\x3A\x2F\x2F127\x2E[0-9]/si"" failed at offset 11: missing opening brace after \o 2/7/2014 -- 18:16:13 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $EXTERNAL_NET $HTTP_PORTS -> $HOME_NET any (msg:"ET WEB_CLIENT Possible Microsoft Internet Explorer Dynamic Object Tag/URLMON Sniffing Cross Domain Information Disclosure Attempt"; flow:established,to_client; content:"obj"; nocase; content:"data"; nocase; within:10; content:"file|3A|//127."; nocase; within:20; pcre:"/(obj.data|\object.data).+file\x3A\x2F\x2F127\x2E[0-9]/si"; reference:url,tools.cisco.com/security/center/viewAlert.x?alertId=19873; reference:url,tools.cisco.com/security/center/viewAlert.x?alertId=20610; reference:url,www.microsoft.com/technet/security/bulletin/ms10-035.mspx; reference:url,www.coresecurity.com/content/internet-explorer-dynamic-object-tag; reference:cve,2010-0255; reference:url,doc.emergingthreats.net/2011695; classtype:attempted-user; sid:2011695; rev:4;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_43304_igb0/rules/suricata.rules at line 8069 2/7/2014 -- 18:16:13 - <error>-- [ERRCODE: SC_ERR_NEGATED_VALUE_IN_PORT_RANGE(56)] - Can't have a negated value in a range. 2/7/2014 -- 18:16:13 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $EXTERNAL_NET [!21:23,!2100,!3535] -> $HOME_NET 1024:65535 (msg:"ET WEB_CLIENT Possible GnuTLS Client ServerHello SessionID Overflow CVE-2014-3466"; flow:established,to_client; content:"|16 03|"; depth:2; byte_test:1,<,4,2; content:"|02|"; distance:3; within:1; content:"|03|"; distance:3; within:1; byte_test:1,<,4,0,relative; byte_test:4,>,1370396981,1,relative; byte_test:4,<,1465091381,1,relative; byte_test:1,>,32,33,relative; reference:url,radare.today/technical-analysis-of-the-gnutls-hello-vulnerability/; reference:cve,2014-3466; classtype:attempted-user; sid:2018537; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_43304_igb0/rules/suricata.rules at line 8225 2/7/2014 -- 18:16:18 - <info>-- 2 rule files processed. 14110 rules successfully loaded, 4 rules failed 2/7/2014 -- 18:16:53 - <info>-- 14119 signatures processed. 16 are IP-only rules, 4158 are inspecting packet payload, 11827 inspect application layer, 77 are decoder event only</info></info></error></error></error></error></error></error></error></error></snip>Are there any known issues about using the '+' to clone the interface to another interface, I was trying to clone my WAN to cover my VPN_WAN but had some issues starting? Will investigate further…..
EDIT: Scratch this.....the interface duplication appears to be working fine, I just needed to let everything settle down.
-
I Have updated the pf IP Reputation Manager Script to version 2.3.3
You can review the revisions in my GIST.
https://gist.github.com/BBcan17/67e8c456cb399fbe02ee
For pfiprep make the changes to your existing file or just overwrite and add your changes as required.
For pfiprepman, just backup the previous 2.3.2 version and replace with the latest 2.3.3 version.
CHANGELOG
***** Added Support to use the Emerging Threats IQRISK IP Reputation Lists
(Requires Subscription)
***** Some more of the Lists now support HTTPS downloads, and the collect lines
have been updated.
***** Added a [ [b]./pfiprep killdb dskip ] function which will reset the database with
the existing Downloaded Files
***** Moved Blocklist.de Blocklist from the Mail Server Section to the Regular
Section, as this list has more than Mail Server Blocklists. Refer to INFO URL in the
script.
***** Added a few other Blocklists
***** Script can now process IBlock Subscription Lists
***** Script can now process SquidBlock lists that are IP based.
***** Added "plog=yes" option to Log Errors to the pfSense System LogI recommend running
[ [b] ./pfiprep killdb ] with version changes or [ [b]./pfiprep killdb dskip ]
If you find any Bugs please let me know and I will promptly fix them.
Feedback is always Welcome!
-
I have Updated the pfIP_Reputation.widget.php file:
1. It now displays the Last Update (Date/Time) per Alias Table.
2. Displays a Total Blocklist Count
3. Displays "All Downloads Successful" or it will List any "FAILED" Downloads.
The updated file can be found in my Gist @
https://gist.github.com/BBcan17/67e8c456cb399fbe02ee#file-pfip_reputation-widget-phpThe file will need to be saved in the
/usr/local/www/widgets/widgets folder [ [b]pfIP_Reputation.widget.php ]
Lines 36 and 37 need to be edited to the "Masterfile" and the "Daily.log" file locations.
From the Status:Dashboard, click on the "+" Icon to add the widget.
See attached for a screenshot of what the Updated Widget Looks like:
Previous pfIP_Rep widget at Top
New - Widget showing (All Downloads Successful)
New - Widget Showing a Failed DownloadWith these changes, you can effectively manage the pfIP_Reputation Manager without needing to use the Shell to see its status. If You have any other suggestions to improve the widget, please let me know.
 -
nice :)
-
Working. Sadly the no packets counted bug is back for me.
Existing install without importing back-up xml files. Just added the new aliases and rules as usual. Normally importing back-up firewall rules breaks it..Checking log file works, update status also. Just no packets :p (yes yes, quick option, logging option, the whole shambles - rules are working fine, DNS lookup also, just no packets counted on dashboard widget)
-
The rules that are using the Aliases (IR_PRI1, IR_SEC1, etc), does the Description start with the same name of the Alias? This is how the widget can match the rule to grab the hit count.
Look at my post https://forum.pfsense.org/index.php?topic=78062.msg427132#msg427132 and take a look at how I labeled the Description field.
-
just adding that it worked for me too after following Cino's method.
-
The rules that are using the Aliases (IR_PRI1, IR_SEC1, etc), does the Description start with the same name of the Alias? This is how the widget can match the rule to grab the hit count.
Look at my post https://forum.pfsense.org/index.php?topic=78062.msg427132#msg427132 and take a look at how I labeled the Description field.
Thanks Cino, we must be on the same wavelength. I just sent Foetus a PM with the exact same thing! ;D
I have to take a look at that regex for the Description matching part. But for now, keep the Rule Description the same as the Alias Name.
-
And idd. Naming the rules anything else breaks it. :-X
Oh well, now that we know that.. :) -
And idd. Naming the rules anything else breaks it. :-X
Oh well, now that we know that.. :)The first word in it has to match the alias… after that, you can add whatever you want.
-
@jflsakfja:
Next up Floating tab:
Set up a rule but make these changes:| Action | Block |
| Quick | TICKED!!! |
| Interface | Hold CTRL and click on all interfaces EXCEPT LAN(admin) and SYNC |
| Direction | any |
| Source | any |
| Destination | any |I've read your post 3 times and I'm having a difficult time understanding the floating rule. The default nature of the firewall is to block incoming traffic unless you add a pass rule. As I understand it, floating rules are evaluated first. So wouldn't this rule always block incoming packets on the interface regardless of the interface rules?
-
Aside from extremely enjoying your funny writing style ( ;D ) I also think you can't get too much karma for all that you are doing with regards to helping people set up Suricata (and before that: Snort).
Thank you, secret man :P
