Simple Setup with LAN, DMZ and WAN - Connection Problems
-
Thank you for your fast reply. I had automatic nat enabled but now changed to manual nat. Result ist still the same: not working. Maybe I should have told, that i have also a problem to connect from LAN to DMZ (e.g. SSH or HTTP), but ping is also working.
I made a screenshot of the nat rules, maybe it will help.
Cheers,
dubitat
-
Have you enabled outbound rules for DMZ interface under firewall -> Rules -> DMZ ??
-
Yes, I made a screenshot of the rule. Without this rule, ping also does not work.
Cheers,
dubitat
-
How does your interfaces look like?
Any gateways configured under routing and DMZ/LAN set to none?
-
No both gateways are set to none (see screenshots). The two checkboxes below that screenshot are unchecked in both interfaces.
Thank you for your help so far.
Cheers,
dubitat
-
Where are you based?
-
In Germany. Is there any locale setting which I forgot to set?
-
No…. I just wanted to take a look via teamviewer and see if we missed something
-
Well I do not think that we missed something, because it is a new fresh installation and I only configured the DMZ, LAN and WAN device. Do you think it could also be a KVM problem and not related to pfsense? But I have no idea how to check that. The connection between two virtual server in the same subnet (172.16.0.0/24) works without any problems. (I tested Ping and HTTP)
-
Could be…
-
Do you think trying 2.2 Alpha could help? Because I am new to pfsense I don't know whether I could use those images in a productive (home) environment.
-
2.1.4 should work fine.
Why is not obvious…
-
The interesting thing is that the packet filter (when I activate logging of firewall packets) passes the packets.
In this forum is another topic in which someone has a problem with DMZ and Internet connection (same error like mine). They also did not found any solution but he also could not send any pings so I hoped that my problem is different.
Cheers,
dubitat