OpenVPN MultiWAN Question
-
Hi,
I am trying to configure openVPN with my pfsense pc based router. Its properly working when i try to connect locally, but when I try to connect online using my WAN IP it doesnt work. I am also confused with my current configuration at home. Because both of my Internet connection is being provided by a Router+Modem device. So when I connect them to my pfsense router, pfsense gets 2 local IP addresses. WAN1 = 192.168.254.101 and WAN2 = 192.168.1.40.
I followed this guide (https://www.youtube.com/watch?v=VdAHVSTl1ys) to make my openvpn work locally. This guide creates firewall rules automatically. Do I need to replica those rules as port forwarding to my Router+Modem devices?
I am using port 34447 as provided by the guide, should I open 34447 to Router+Modem device 1 and 2? And to which IP should I point them to? Because each Router+Modem device has DHCP. But I used 192.168.0.1 to open pfsense web gui from my computer.
Anything else I need to configure to make this work?
Karl
-
It's not working because you're double NATing. You need to:
-
Configure the modems in bridge mode, so PFsense gets the public IP's (most people would recommend this option)
-
or Forward 34447 in your modem to PFsense
-
-
@marvosa
Its not actually just a modem its a modem+router device. Im very new to networking and stuff, I have no idea if the bridge mode would work with the modem+router.I did your #2 suggestion and it worked. Only problem now is how I can port forward to other machines/ips not connected directly to the modem+router.