Boot da ALIX 2D13 non riuscito
-
Salve a tutti,
ho acquistato una alix 2d13 per sperimentare e provare ad utilizzare pfSense - ho però il seguente problema.Ho scaricato l'immagine per CF da 4 GB, l'ho inserita nella memoria e poi nella ALIX e tramite seriale ottengo la seguente:
PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory01F0 Master 848A SanDisk SDCFH2-4096
Phys C/H/S 7964/16/63 Log C/H/S 995/128/63
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxPer scrupolo ho anche provato a montare monowall, utilizzando differenti CF da 256 Mb e il risultato è piu o meno simile
PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory01F0 Master 848A SanDisk SDCFH-256
Phys C/H/S 980/16/32 Log C/H/S 980/16/32
Consoles: internal video/keyboard
BIOS drive C: is disk0
BIOS 640kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 1.1
(root@mb64.neon1.net, Thu Jul 23 20:58:38 CEST 2009)
/kernel text=0x522354 data=0x9eb34+0x393b0 syms=[0x4+0x604b0+0x4+0x79507]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxSbaglio qualcosa o ci sono dei problemi?
Grazie per l'aiuto e buona giornata
Daniele -
Rettifico: m0n0wall funziona perfettamente ora, ho scaricato l'immagine embedded e ora va
*** This is m0n0wall, version 1.33
built on Wed Mar 16 12:01:42 CET 2011 for embedded
Copyright (C) 2002-2011 by Manuel Kasper. All rights reserved.
Visit http://m0n0.ch/wall for updates.LAN IP address: 192.168.1.1
Port configuration:
LAN -> vr0
WAN -> vr1m0n0wall console setup
- Interfaces: assign network ports
- Set up LAN IP address
- Reset webGUI password
- Reset to factory defaults
- Reboot system
- Ping host
Enter a number:
-
QUalcuno può aiutarmi gentilmente?
Ho provato diverse CF ma non c'è niente da fare: altri sistemi operativi vanno perfettamente su questo nn c'è niente da fare, dove sbaglio?Ciao e grazie
Daniele