CP problem
-
Hello..
network design:
internet == pfsense == 3560x ==(GRE tunnel)== 3560G == PC (in VLAN 10)
||
DC/DNS/DHCP–--------------------
Network Config:
pfsence == 3560x : 172.16.0.0/30
3560X == DC/DNS/DHCP : 10.15.249.128/28
3560x == 3560G : 172.16.1.0/30
3560G == PC : 10.15.0.0/22Problem:
How do i get the captive portal to catch all request from the PC??
Can this setup even be done, with pfsense???–--------------------
with the current setup i have tryed the following:
Disable Captive portal - The pc can browse the internet
Enable Captive portal - No internet on the PC, No login portal either. -
DNS on the clients must be the IP of VLAN10 as far as I know.
To make sure CP is working you can enter the IP of VLAN10 interface with port 8000
like this:
http://192.168.100.1:8000Not sure how to do that with an other DNS server than pfsense.
-
If i use the IP on pfsense (172.16.0.1:8000) from the PC the portal is working, but without redirect.
but if i use a DNS address (google.com) i dont get the protal, just a timeout.It is not a option to use the 172.16.0.1:8000 as 80-85% of the pc that is going to be connectet will be private PC's witch i dont have control over.
–--------------------
your sugestion is to use a IP in vlan, like 10.15.3.254:8000 (gateway vlan 10) only gives me a time out (IE cant display the page)
Im only using the captive portal, all other features shoud be disablet.
-
is the 3560 doing the routing in this schema?
Is the option to not use mac addresses in CP disabled?
Anything from logs? -
@ermal:
is the 3560 doing the routing in this schema?
Yes, the 3560x is doing all the routing, that part is working just fine. (there is access to the internet from PC when CP is disabled)
@ermal:
Is the option to not use mac addresses in CP disabled?
Yes, that option is disabled
@ermal:
Anything from logs?
what log do you want to see??
-
CP and system logs.