Squidguard-squid3 systempatch for use with squid3-dev

webstor

Hm, my squidguard isn't still working.

Are you using HAVP as antivirus?

Did you add more then one nat rule for ssl decryption?

Thanx.

aGeekhere

Are you using HAVP as antivirus?

I left the squid Antivirus (clamav) as default (do not know if it is using HAVP or not, can't
even find a setting for it in squid)

Did you add more then one nat rule for ssl decryption?

I did not set any nat rules for ssl decryption in the Firewall, but rather in System: Advanced: Firewall and NAT and set NAT Reflection mode for port forwards to enable(pure nat).Also enabled Enable NAT Reflection for 1:1 NAT and Enable automatic outbound NAT for Reflection.

Hope this helps

Also any ideas on my above post about windows updates and other update servers?

webstor

Strange, is your squidguard configured as parent for squid?

Could you maybe post your squid.conf please?

Thanx.

aGeekhere

in squidgard set Blacklist proxy as the ip of pfsense

webstor

That is not working correctly, squidguard won't start if I enter the ip of pfsense in the blacklist proxy.

aGeekhere

Same, I have to cut every thing out of integrations then start squidgaurd then renter it back in

webstor

And after that it was working, I mean ssl bump and squidguard filtering?

aGeekhere

both, sometimes a restart is needed and then cut everying out from integrations, start squidgaurd and then paste it back into squid.

webstor

Nope, won't help. I don't get it.

aGeekhere

Hi all, still stuck on getting windows update working, any advice?.

webstor

When I got it working with squidguard, I will attend to that problem.

aGeekhere

I am a bit stumped on why Squidguard is not working for you (as I am new to this) list your squid, Squidguard and System: Advanced: Firewall and NAT settings.

webstor

Transparent Proxy.

Integrations Settings:
cache_peer 127.0.0.1 parent 3125 0 name=havp no-query no-digest no-netdb-exchange default;url_rewrite_program /usr/pbi/squidguard-squid3-amd64/bin/squidGuard -c /usr/pbi/squidguard-squid3-amd64/etc/squidGuard/squidGuard.conf;url_rewrite_bypass off;url_rewrite_children 16 startup=8 idle=4 concurrency=0

Custom Acls:
always_direct allow all
ssl_bump server-first all

Only one nat rue for redirecting https traffic to squid.

aGeekhere

do you put amd64 instead of i386 by mistake or are you running amd64?

webstor

I'm running a 64bit pfsense.

aGeekhere

is the squidGuard service able to run? or is it erroring? Also try using proxy port 3128 in Proxy port under Squid General Settings.

Also here is my Custom ACLS (Before_Auth) in squid (Trying to get windows updates working)

acl WindowsUpdate dstdomain windowsupdate.microsoft.com
acl WindowsUpdate dstdomain update.microsoft.com
acl WindowsUpdate dstdomain activex.microsoft.com
acl WindowsUpdate dstdomain download.windowsupdate.com
acl WindowsUpdate dstdomain codecs.microsoft.com
acl WindowsUpdate dstdomain stats.updates.microsoft.com
acl WindowsUpdate dstdomain c.microsoft.com
no_cache deny WindowsUpdate
http_access allow WindowsUpdate
always_direct allow all
ssl_bump server-first all

This does not work

webstor

Hi, squidguard is running and no error in the log files.
Port squid is 3128.

aGeekhere

But it is not filtering anything? Check Target Rules in squidGuard.
In SquidGuard: General settings
tic Check this option to enable blacklist
Blacklist proxy is your pfsense router ip

then clear your cache or try private search and try now

webstor

If I deactivate ssl bumping it works just fine.

webstor

could you post your squid.conf please?