Vyprvpn Port Forwarding
-
Hello everybody!
I have been digging around on the forums trying to figure out a problem that I have come across with my pfsense box running my vyprvpn openVPN client.
First off, I am not a network expert, and I apologize if my questions seem trivial to you experts out there ;)
I am at work now, so unable to send any config snapshots at the moment.
So here is what Ive got…
I managed to dig through about a half dozen forum threads and got my pfsense box set up running my openVPN client with vyprvpn. At the time of setting it up, I wanted to funnel all of my traffic through my VPN tunnel. I was secessful in funneling all of my network traffic through my VPN by doing the following things,
- Got the openvpn connection up and running.
- Created an interface for the openvpn connection to vyprvpn
- Put NAT configuration in manual, and duplicated each of the 3 rules with the interface being my openvpn interface.
THAT secessfully put all of my traffic through my openvpn connection.
Now I have a problem... I am wanting to open a port for a seed box that I have running. I dug and dug in the forums looking for people with similar problems, but was unable to get any of the suggestions to work.
The first thing I did was went to my vyprvpn control panel on their website, and disabled the NAT/firewall on their end. That should have opened up the ports on their end.
I tried several things... cant remember them all now, but...Created a rule for my vpn connection that was something like..
Interface: VYPRVPN_INTERFACE
Source: ANY
Destination: The ip address of my seed box.Ive tried multiple combinations of rules including changing the interface to WAN... ect..
Whenever I go to canyouseeme.com to check the ports, it looks like every single port is blocked! Even port 80! :o Now how can that be?
Is it possible to do what I am trying to do? How would you go about opening the port up on the VPN conneciton?
Responses are greatley appreciated! /cheers guys! Thanks for all the great posts!
-
I ended up getting this figured out over the weekend! ::)
Will post a follow up message when I get home on what settings I used to get it working… If anybody is interested that is.. ;)
-
I am interested.
Which version of pfSense are you running? -
Ummmmm…
Sounds like something you were working on Mr. Wolf.
-
Ummmmm…
Sounds like something you were working on Mr. Wolf.
Yup, still waiting for bugfix of reply-to in 2.2….. :)
-
Port forwarding finally works with the fix of https://redmine.pfsense.org/issues/3760.
Great!
-
Good to know.