2.1.5 widescreen patch - multiple columns on dashboard

KOM

I had the same problem, and it's ongoing. If I hammer the F5 key quickly twice, my original 4-column layout appears. A single F5 refresh puts it back into dual-column mode. Totally bizarre.

RonpfS

Nice trick … twice F5 bring back the buttons :o ;D

F5 and CTRL-F5 doesn't do it :(

KOM

Like I said, totally bizarre. But it works consistently, so at least there's that.

RonpfS

Since the last reboot … no more issues with the widescreen patch, I always get 3 columns display ;D

KOM

Ah, well there you go. I haven't rebooted since the 2.1.5 upgrade.

firefox

@charlie0440:

If your issues with the menu wrapping on pfsense (not caused by the patch but code adding in 2.1.5). Go to system > patches and apply this commit:
https://github.com/CharlieMarshall/pfsense/commit/2b5c16b9c6ee3dcb9a1333b44949f48024eb3cd0

I do not have this option under system
I use pfsense 2.1.5

Where it goes ?

RonpfS

@firefox:

I do not have this option under system
I use pfsense 2.1.5

Where it goes ?

Maybe you need to install the Package System Patches.

firefox

Thank you
I installed it

spillemw

My pfSense file system is read-only. When I ssh to the machine and select shell, I am in the root directory, but obviously not a root user. Note that I bought a Stonegate firewall with pfSense 2.1.5 pre-installed.
I am new to pfSense but not new to ubuntu.
Any suggestion?

–-------------------------

Update that may help other people : the file system was read-only so I had to remount it in the shell with rw enabled. Then I could get the new them and apply it.
Do not forget to reboot the machine afterwards so that the ro is in place again for added security.

phil.davis

@spillemw:

My pfSense file system is read-only. When I ssh to the machine and select shell, I am in the root directory, but obviously not a root user. Note that I bought a Stonegate firewall with pfSense 2.1.5 pre-installed.
I am new to pfSense but not new to ubuntu.
Any suggestion?

–-------------------------

Update that may help other people : the file system was read-only so I had to remount it in the shell with rw enabled. Then I could get the new them and apply it.
Do not forget to reboot the machine afterwards so that the ro is in place again for added security.

I have no idea what your post has to do with widescreen patch. But:

pfSense is built on top of FreeBSD (not Ubuntu)
It is all configured from the webGUI - so do not use the shell to change anything unless you know what and why you are changing it.
"disk" can be switched between ro and rw and back with:
/etc/rc.conf_mount_rw
/etc/rc.conf_mount_ro
No need to find the right mount commands yourself, no need to reboot to put it back.
Diagnostics->nanoBSD also has a button to switch to RW then switch back to RO.