Block websites and ports on APU1D4
-
Hello, I have the APU1D4 whit SD card, so the first problem is that i cant install the squidguard because it is not working, it is just installed and it doesn't do anything.So my first question is how can i make a firewall rule to block some ports and ip-s,and the second question is how to specify the time and date to activate the rule.
thanks for the help :)
-
SquidGuard relies on Squid. Do you have Squid installed? The hardware units with SD cards do not work well with Squid unless you set the hard disk cache size to 0 and the hard disk cache system to Null.
https://doc.pfsense.org/index.php/Firewall_Rule_Basics
https://doc.pfsense.org/index.php/Firewall_Rule_Troubleshooting
https://doc.pfsense.org/index.php/Firewall_Rule_Schedules
-
hey thanks for the replay,meanwhile i found some way to install squidguard. I just upgraded the RAM Disk settings and now i can load the blacklist to the APU1. So for the port blocking or website blocking, i think for the port blocking i found an example:
Action: Block
Interface : LAN
TCP/IP Version : IPv4
Protocol: UDP
Source port range: from 27000
to 27015Destination: LAN address
This will block UDP 27000-27015 on the LAN ?
I can't find an example for the ip or address blocking. :-[ -
LIke I said earlier, if you're using Squid with an appliance & a CF card then you need to set your chache size to 0 and file system to null.
I can't find an example for the ip or address blocking.
If you want to block custom sites, create a Target Category. Add your IP or domain. Then edit your Target Category's permission in Common ACL's Target Rules List.