VMware 2.2 RC and VMware Tools - can only ping

Jamerson

before the update i had vmware running fine,
after the update can't get network card up,
logged in and had to reconfigure the NICS,
names are changed from em0 to VMX1–-
managed the have the pfsense up and running.
vmware tools can't run with the next steps "
mkdir -p /mnt/cdrom
mount_cd9660 /dev/acd0 /mnt/cdrom
cd /tmp
tar xvzf /mnt/cdrom/vmware-freebsd-tools.tar.gz
cd vmware-tools-distrib
./vmware-install.pl -d --clobber-kernel-modules=vmxnet3,pvscsi,vmmemctl

johnpoz

I didn't have any problems getting the native tools running, other than having to use pkg install to get compat and perl5.20 installed. The instructions on pfsense doc work after that, and I also created ln for perl.. Tools come up fine.. now see nics vmx3f0 and vmx3f1 etc..

But can not get web gui up, can not ssh to pfsense.. I can ping pfsense is about it..

Something is off – but again there is really no reason for the vmtools - there is driver for vmx3 in freebsd out of the box now. And the openvm tools install to give you the ability to shutdown the vm gracefully, etc..

As to your mount -- you sure your cdrom is acd0, maybe its just cd0?

example

[2.2-RELEASE][root@pfSense.localdomain]/root: mount -t cd9660 /dev/cd0 /mnt/
[2.2-RELEASE][root@pfSense.localdomain]/root: cd /mnt
[2.2-RELEASE][root@pfSense.localdomain]/mnt: ls
manifest.txt vmware-freebsd-tools.tar.gz
[2.2-RELEASE][root@pfSense.localdomain]/mnt: cd /tmp
[2.2-RELEASE][root@pfSense.localdomain]/tmp: tar xvzf /mnt/vmware-freebsd-tools.tar.gz
x vmware-tools-distrib/
x vmware-tools-distrib/doc/
x vmware-tools-distrib/doc/open_source_licenses.txt
x vmware-tools-distrib/doc/INSTALL
x vmware-tools-distrib/doc/README

Jamerson

@johnpoz:

I didn't have any problems getting the native tools running, other than having to use pkg install to get compat and perl5.20 installed. The instructions on pfsense doc work after that, and I also created ln for perl.. Tools come up fine.. now see nics vmx3f0 and vmx3f1 etc..

But can not get web gui up, can not ssh to pfsense.. I can ping pfsense is about it..

Something is off – but again there is really no reason for the vmtools - there is driver for vmx3 in freebsd out of the box now. And the openvm tools install to give you the ability to shutdown the vm gracefully, etc..

As to your mount -- you sure your cdrom is acd0, maybe its just cd0?

example

[2.2-RELEASE][root@pfSense.localdomain]/root: mount -t cd9660 /dev/cd0 /mnt/
[2.2-RELEASE][root@pfSense.localdomain]/root: cd /mnt
[2.2-RELEASE][root@pfSense.localdomain]/mnt: ls
manifest.txt vmware-freebsd-tools.tar.gz
[2.2-RELEASE][root@pfSense.localdomain]/mnt: cd /tmp
[2.2-RELEASE][root@pfSense.localdomain]/tmp: tar xvzf /mnt/vmware-freebsd-tools.tar.gz
x vmware-tools-distrib/
x vmware-tools-distrib/doc/
x vmware-tools-distrib/doc/open_source_licenses.txt
x vmware-tools-distrib/doc/INSTALL
x vmware-tools-distrib/doc/README

can you share how did you install PEARL,
can't get it installed
the below steps arent working for me !

Shared object "libutil.so.8" not found, required by "perl"

setenv \
PACKAGESITE \

http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/amd64/packages-8.3-release/Latest/

pkg_add -rv wget

pkg_add -r compat6x-amd64 perl

keep getting the below :

[2.2-RELEASE][root@firewall.root.nl]/: pkg
The package management tool is not yet installed on your system.
Do you want to fetch and install it now? [y/N]: y
Bootstrapping pkg from ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/amd64/packages-8.3-release/Latest/, please wait...
pkg: Error fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/amd64/packages-8.3-release/Latest//Latest/pkg.txz: File unavailable (e.g., file not found, no access)
A pre-built version of pkg could not be found for your system.
Consider changing PACKAGESITE or installing it from ports: 'ports-mgmt/pkg'.

marcelloc

Pfsense 2.2 uses freebsd 10.1

You are trying to install 8.3 links and packages

Also, use pkg install instead of old pkg_add

Jamerson

@marcelloc:

Pfsense 2.2 uses freebsd 10.1

You are trying to install 8.3 lins and packages

Also, use pkg install instead of old pkg_add

thanks
i beleive this the link of the 10.1 ?
ftp://ftp.freebsd.org/pub/FreeBSD/releases/ISO-IMAGES/10.1/

johnpoz

Guess I should edit that doc..

Clearly those are for the old pfsense.. I already went over how to install ;) pkg install

pkg install perl5.20

if you running 64 bit then compat would be

pkg install compat6x-amd64

And AGAIN - there really is no reason to install them, vmx3 is support out of the box on freebsd 10 that pfsense is using. When you setup the vm you can set interfaces to vmx3 and out of the box working.. If you want to be able to send a guest shutdown then install the openvm package..

Jamerson

@johnpoz:

Guess I should edit that doc..

Clearly those are for the old pfsense.. I already went over how to install ;) pkg install

pkg install perl5.20

if you running 64 bit then compat would be

pkg install compat6x-amd64

And AGAIN - there really is no reason to install them, vmx3 is support out of the box on freebsd 10 that pfsense is using. When you setup the vm you can set interfaces to vmx3 and out of the box working.. If you want to be able to send a guest shutdown then install the openvm package..

True vmx3 are working out of the speed,
the speed of the NIC is autoset, can't set it on 10Gbps,

is it possible to change this somehow for 10Gbps on the NICS?

marcelloc

@johnpoz:

And AGAIN - there really is no reason to install them, vmx3 is support out of the box on freebsd 10 that pfsense is using

Nic ok but what about memory and process management improvements with vmtools ???

Jamerson

@marcelloc:

@johnpoz:

And AGAIN - there really is no reason to install them, vmx3 is support out of the box on freebsd 10 that pfsense is using

Nic ok but what about memory and process management improvements with vmtools ???

I've read somewhere Johnpoz is going to update the RC2.2 Doc for vmware tools

KOM

Nic ok but what about memory and process management improvements with vmtools

And heartbeat. Don't forget about the heartbeat.

johnpoz

Memory and process.. Isn't what this does

[2.2-RELEASE][root@pfSense.local.lan]/root:dmesg
<snipped>VMware memory control driver initialized
[2.2-RELEASE][root@pfSense.local.lan]/root:

That is loaded from open tools.. What else are you looking for - heartbeat?

[2.2-RELEASE][root@pfSense.local.lan]/root: kldstat
Id Refs Address Size Name
1 10 0xffffffff80200000 22c57e8 kernel
2 1 0xffffffff82611000 22f7 vmmemctl.ko
3 1 0xffffffff82614000 237b vmxnet.ko
4 1 0xffffffff82617000 2d72 vmblock.ko
5 1 0xffffffff8261a000 890f vmhgfs.ko</snipped>

Jamerson

i've got this error at the last step :


[2.2-RELEASE][root@pfSense.localdomain]/tmp/vmware-tools-distrib: ./vmware-install.pl -d --clobber-kernel-modules=vmxnet3,pvscsi,vmmemctl
ELF binary type "0" not known.
ELF binary type "0" not known.
ELF binary type "0" not known.
VMware Tools 9.4.11 build-2400950 for Linux will not install on the operating
system you are running. Please be sure you install the version of VMware Tools
that is appropriate for your operating system.

Execution aborted.

johnpoz

"VMware Tools 9.4.11 build-2400950 for Linux will not install on the operating"

Why would you try and install linux tools on freebsd (pfsense)?

Jamerson

@johnpoz:

"VMware Tools 9.4.11 build-2400950 for Linux will not install on the operating"

Why would you try and install linux tools on freebsd (pfsense)?

i have followed this tutorial

http://www.v-front.de/2015/01/pfsense-22-was-released-how-to-install.html

i am on ESXI 5.5 Build 2403361
the Vmware tools i am trying to install is the one mounted

when i am on the cd/mnt i see only

VMwareTools-9.4.11-2400950.tar.gz
vmware-tools-upgrader-32*
vmware-tools-upgrader-64*
run_upgrader.sh*
manifest.txt*

the only file i can extract is VMwareTools-9.4.11-2400950

thank you

KOM

When I mount the VMWare Tools CD under pfSense 2.2, I see

manifest.txt
vmware-freebsd-tools.tar.gz

If you're seeing VMWare Tools for Linux then I'm guessing you picked the wrong OS type when you created the virtual machine. Did you select a Linux flavour or Other (FreeBSD 64-bit)?

Jamerson

@KOM:

When I mount the VMWare Tools CD under pfSense 2.2, I see

manifest.txt
vmware-freebsd-tools.tar.gz

If you're seeing VMWare Tools for Linux then I'm guessing you picked the wrong OS type when you created the virtual machine. Did you select a Linux flavour or Other (FreeBSD 64-bit)?

yes i chosed Other 2.6.0(64-Bit)
when i chose Other Linux 64 bit, it support just E1000 adapter

KOM

Well, you picked the wrong selection and I wouldn't be surprised if other funny behaviours started happening too. Recreate your VM with the correct OS template (Other: FreeBSD 64-bit) and start again.

Jamerson

@KOM:

Well, you picked the wrong selection and I wouldn't be surprised if other funny behaviours started happening too. Recreate your VM with the correct OS template (Other: FreeBSD 64-bit) and start again.

My ESXI doesn't says Other : FreeBSD but it said Others : Linux

KOM

Time to upgrade to something a little more current then. What are you using, ESXi 3.x or 4.x? ESXI is free, so there is little excuse to not upgrade.

Jamerson

@KOM:

Time to upgrade to something a little more current then. What are you using, ESXi 3.x or 4.x? ESXI is free, so there is little excuse to not upgrade.

its not the Free version
i am on the latest one i am on ESXI 5.5 Build 2403361
i see the version of the FreeBSD thanks
i understand its used repro 10.1
which link can i use to tell Pfsense to look at to install pkg ?