OpenVPN Server not routing local websites

lastb0isct

It doesn't look like there is much in these other tabs. Do you know what i'd have to add to allow this traffic?

Derelict

@marvosa:

Your LAN subnet is pretty common, make sure your client is not connecting from 192.168.1.0/24.

+1 Renumber your network off the same IP scheme used by 10s of millions of little blue routers all over the world.

Some random suggestions:

172.29.40.0
192.168.169.0

It is getting a 192.168.2.x address when it connects.

Then why is 192.168.10.0/24 defined in server2.conf?

marvosa

As Derelict said, your config is handing out 192.168.10.0/24 addresses, so if you're getting a 192.168.2.0/24 address you're connecting to the wrong server.

You obviously have multiple servers configured and you are making a successfully connection (verified by an IP in the 192.168.2.0/24 range), so I'm betting you simply exported the config for the wrong server.

lastb0isct

Sorry, my mistake.

I am connection to 192.168.10.x subnet. I was getting the 192.168.10.2 IP assigned to my client.

EDIT: Also, i'll work on renumbering my network. Its a good suggestions, no reason to be that vulnerable. But do you guys notice anything else that is needed to pass the traffic from the OpenVPN to my LAN?

I am having issues specifically with my android phone connecting over VPN having this access.

rin_tinn

I was having the same problem. Turned out the firewall was enabled on my Ubuntu server (which I knew, but forgot to punch a hole through).

If you log into your Ubuntu server and issue the command "sudo ufw status" it will tell you if the firewall service is active or not. If it is active, you'll need to have rules which allow access from the VPN network you set in the "IPv4 Tunnel Network" option (VPN >> OpenVPN >> Server).

lastb0isct

I checked the firewall status and its turned inactive:

lastb0isct@miniserver:~$ sudo ufw status
[sudo] password for lastb0isct:
Status: inactive

Any other ideas?

rin_tinn

It is interesting that the port in your screen capture of your firewall rule is 11111 and not 1194. Wonder if that has something to do with it? Pretty new to pfSense myself, so I'm not sure.

What VPN client are you using to connect with? I was trying to connect with Tunnelblick, but could not get it to work well. After I switched over to Viscosity VPN client, I haven't had any other problems.

marvosa

Lets get a few things out of the way:

Post a network map, so we know how things are connected
What is the LAN IP of your PFsense box?
Post the routing table of your server. Is the IP still 192.168.1.62?
Post the routing table of your connected client
What port is your app listening on (80?, 8080?, 8081?, 8082?)?
From the client, does the port responds via telnet?
Post a traceroute from the client to the server

lastb0isct

LAN IP of pfSense Box: 192.168.1.2
Ports of Server = 8080, 8081, 8082
It responds via telnet on all of those ports

Server routing table:

Proto Recv-Q Send-Q Local Address           Foreign Address         State      
tcp        0      0 192.168.1.62:8082       192.168.1.62:52465      TIME_WAIT  
tcp        0      0 192.168.1.62:8082       192.168.1.62:52466      TIME_WAIT  
tcp        0      0 localhost:58846         localhost:52205         ESTABLISHED
tcp        0      0 192.168.1.62:887        192.168.1.35:nfs        ESTABLISHED
tcp        0    236 192.168.1.62:ssh        192.168.10.2:65407      ESTABLISHED
tcp        0      0 192.168.1.62:tproxy     192.168.10.2:64229      ESTABLISHED
tcp        0      0 192.168.1.62:52467      192.168.1.62:8082       TIME_WAIT  
tcp        0      0 192.168.1.62:tproxy     192.168.10.2:64232      ESTABLISHED
tcp        0      0 192.168.1.62:http-alt   192.168.1.127:2278      ESTABLISHED
tcp        0      0 192.168.1.62:tproxy     192.168.10.2:64227      ESTABLISHED
tcp        0      0 192.168.1.62:tproxy     192.168.10.2:64230      ESTABLISHED
tcp        1      0 192.168.1.62:36767      vps1.v-u.be:http        CLOSE_WAIT 
tcp        0      0 192.168.1.62:mysql      192.168.1.41:36738      ESTABLISHED
tcp        0      0 192.168.1.62:tproxy     192.168.10.2:64228      ESTABLISHED
tcp        0      0 192.168.1.62:8082       192.168.1.62:52464      TIME_WAIT  
tcp        0      0 localhost:52205         localhost:58846         ESTABLISHED
tcp        0      0 192.168.1.62:http-alt   192.168.10.2:64268      ESTABLISHED
tcp        0      0 192.168.1.62:http-alt   192.168.10.2:64266      ESTABLISHED
tcp        0      0 192.168.1.62:8082       192.168.1.62:52463      TIME_WAIT  
tcp        0      0 192.168.1.62:mysql      192.168.1.40:34729      ESTABLISHED
tcp        0      0 192.168.1.62:http-alt   192.168.10.2:64267      ESTABLISHED
tcp        0      0 192.168.1.62:tproxy     192.168.10.2:64231      ESTABLISHED

Client routing table:

Proto Recv-Q Send-Q  Local Address          Foreign Address        (state)    
tcp4       0      0  192.168.10.2.65281     64.210.194.87.https    SYN_SENT   
tcp4       0      0  192.168.10.2.65280     17.110.242.14.https    SYN_SENT   
tcp4       0      0  192.168.10.2.65279     17.110.242.14.https    SYN_SENT   
tcp4       0      0  192.168.10.2.65278     lax02s20-in-f24..https SYN_SENT   
tcp4       0      0  192.168.10.2.65277     216.178.109.197.https  SYN_SENT   
tcp4       0      0  192.168.10.2.65276     lax02s20-in-f24..https SYN_SENT   
tcp4       0      0  192.168.10.2.65275     lax17s05-in-f4.1.https SYN_SENT   
tcp4       0      0  192.168.10.2.65274     lax02s19-in-f8.1.https SYN_SENT   
tcp4       0      0  192.168.10.2.65273     pa-in-f188.1e100.5228  SYN_SENT   
tcp4       0      0  192.168.10.2.65272     pc-in-f189.1e100.https SYN_SENT   
tcp4       0      0  192.168.10.2.65271     pc-in-f189.1e100.https SYN_SENT   
tcp4       0      0  192.168.10.2.65270     lax02s19-in-f8.1.https SYN_SENT   
tcp4       0      0  192.168.10.2.65269     lax17s05-in-f4.1.https SYN_SENT   
tcp4       0      0  192.168.10.2.65268     pa-in-f188.1e100.5228  SYN_SENT   
tcp4       0      0  192.168.10.2.65267     pc-in-f189.1e100.https SYN_SENT   
tcp4       0      0  192.168.10.2.65266     pc-in-f189.1e100.https SYN_SENT   
tcp4       0      0  192.168.0.18.65263     173.112.255.173..https ESTABLISHED
tcp4       0      0  localhost.menandmice-d localhost.65262        ESTABLISHED
tcp4       0      0  localhost.65262        localhost.menandmice-d ESTABLISHED
tcp4       0    282  192.168.0.18.65261     www.tunnelblick..https ESTABLISHED
tcp4       0      0  192.168.0.18.65096     173.243.12.181.https   ESTABLISHED
tcp4       0    106  192.168.0.18.65081     17.110.228.19.5223     ESTABLISHED
tcp4       0      0  192.168.10.2.64068     192.168.1.35.ftp       ESTABLISHED
tcp4       0      0  192.168.1.210.54971    104.130.144.67.https   CLOSE_WAIT 
tcp4       0      0  localhost.26164        localhost.49375        ESTABLISHED
tcp4       0      0  localhost.49375        localhost.26164        ESTABLISHED
tcp4       0      0  localhost.29754        localhost.49152        ESTABLISHED
tcp4       0      0  localhost.49152        localhost.29754        ESTABLISHED
udp6       0      0  *.64174                *.*                               
udp4       0      0  *.64174                *.*                               
udp6       0      0  *.50856                *.*                               
udp4       0      0  *.50856                *.*                               
udp6       0      0  *.50308                *.*                               
udp4       0      0  *.50308                *.*                               
udp4       0      0  *.50160                *.*                               
udp4       0      0  *.*                    *.*                               
udp4       0      0  192.168.10.2.ntp       *.*                               
udp4       0      0  192.168.0.18.ntp       *.*                               
udp6       0      0  *.61890                *.*                               
udp4       0      0  *.61890                *.*

Traceroute from client to server:

 traceroute 192.168.1.62
traceroute to 192.168.1.62 (192.168.1.62), 64 hops max, 52 byte packets
 1  192.168.10.1 (192.168.10.1)  32.289 ms  31.075 ms  23.009 ms
 2  192.168.1.62 (192.168.1.62)  22.792 ms  22.625 ms  21.795 ms

lastb0isct

Attached is the screenshot of my internal network.

![Screen Shot 2015-02-07 at 3.05.13 PM.png](/public/imported_attachments/1/Screen Shot 2015-02-07 at 3.05.13 PM.png)
![Screen Shot 2015-02-07 at 3.05.13 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-02-07 at 3.05.13 PM.png_thumb)

Derelict

A network diagram without at least subnets and interface addresses is about worthless.

See the diagram in my sig for an example of something that might help people solve your problem.

marvosa

I agree with Derelict, a network map with IP info would be helpful. Also, those are not routing tables… you've given us a list of what is connected. The command you're looking for is "netstat -r"

It looks like you have a successful connections to port 8080:

tcp 0 0 192.168.1.62:http-alt 192.168.10.2:64268 ESTABLISHED
tcp 0 0 192.168.1.62:http-alt 192.168.10.2:64266 ESTABLISHED

but may be having issues with 8082.

These connections are more telling though:

tcp 0 0 192.168.1.62:tproxy 192.168.10.2:64229 ESTABLISHED
tcp 0 0 192.168.1.62:tproxy 192.168.10.2:64227 ESTABLISHED
tcp 0 0 192.168.1.62:tproxy 192.168.10.2:64230 ESTABLISHED

"tproxy" is apparently short for "Transparent Proxy", so it looks like you have squid running in transparent mode and it's intercepting/redirecting your requests. Start by disabling squid.

lastb0isct

Here is the netstat -r from the server:

Destination Gateway Genmask Flags MSS Window irtt Iface
default pfroute.apt.dat 0.0.0.0 UG 0 0 0 eth0
link-local * 255.255.0.0 U 0 0 0 eth0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0

For further testing, since i finally had the opportunity to go to a friends place and test out my VPN from my laptop I was able to hit the server just fine. I believe it might be an issues with the android client i'm using. The only thing that wasn't working from my laptop AND my android and all other clients is forwarding traffic to the internet. I can't get any external websites now. I'm sure thats a rule somewhere or a setting that I need to change.

marvosa

For further testing, since i finally had the opportunity to go to a friends place and test out my VPN from my laptop I was able to hit the server just fine. I believe it might be an issues with the android client i'm using. The only thing that wasn't working from my laptop AND my android and all other clients is forwarding traffic to the internet. I can't get any external websites now. I'm sure thats a rule somewhere or a setting that I need to change.

Well, you have an any/any rule on your OpenVPN tab, so that rules out a firewall issue. So, that leaves routing, DNS or NAT. Go through the troubleshooting progression again.

lastb0isct

Thanks for all the help. I'll diagnose again in a bit. Had an issue last night where my pfsense box froze and lost a few settings so i will have to go back in and fix everything up again.

Should have configured autobackup…