PfBlockerNG

Topper727 · Feb 10, 2015, 7:45 AM

Wonder if there is a problem with the lists.. I had that happen and I disabled with help from BBcan the bad apples.. Found out there is a 0.0.0.0 address in bad ones and that was a bug that he is fixing now.

SixXxShooTeR · Feb 10, 2015, 7:49 AM

deviantart is working now. Malwarebytes still saying unable to access server when updating. Only packets being blocked are from level1 and ads and tracker list.

Topper727 · Feb 10, 2015, 7:56 AM

try

https://www.iblocklist.com/lists.php

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=anti-infringement ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=webexploit ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=dshield ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=spyware ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=drop ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=zeus ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=china ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=forumspam ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=pedophiles ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=northkorea ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=russia ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=atma ]
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=spammers ]
.

doktornotor · Feb 10, 2015, 7:59 AM

@Topper727:

Found out there is a 0.0.0.0 address in bad ones

Whoever puts 0.0.0.0 in a blocklist should not maintain one in the first place… WTF! :o >:(

Topper727 · Feb 10, 2015, 8:02 AM

Agree.. but BBcan had code to remove it but now he has a file that I gave him from a list that he can test and debug that part of the code. So in future if more of those 0.0.0.0 show up they will be ignored. Hence the list should work

McFuzz · Feb 10, 2015, 8:03 AM

By the way - another interesting thing I've noticed between pfBlocker and pfBlockerNG is that with pfBlocker, it'd block A LOT of packets, but with pfBlockerNG - barely so:

What gives..?

Topper727 · Feb 10, 2015, 8:05 AM

Suggestion if not already done. Put the block to block both for each list.

And I get a lot of blocks from it. Go surf around some bad sites and watch the numbers grow.

![Snap 2015-02-10 at 03.03.26.jpg](/public/imported_attachments/1/Snap 2015-02-10 at 03.03.26.jpg)
![Snap 2015-02-10 at 03.03.26.jpg_thumb](/public/imported_attachments/1/Snap 2015-02-10 at 03.03.26.jpg_thumb)

Topper727 · Feb 10, 2015, 8:53 AM

Also a suggestion from BBcan I was told about this. Setup this page like I did and then force reload to get rid of bad nets not just 1 ip from it.

![screencapture-192-168-1-1-pkg_edit-php (3).png](/public/imported_attachments/1/screencapture-192-168-1-1-pkg_edit-php (3).png)
![screencapture-192-168-1-1-pkg_edit-php (3).png_thumb](/public/imported_attachments/1/screencapture-192-168-1-1-pkg_edit-php (3).png_thumb)

SixXxShooTeR · Feb 10, 2015, 9:03 AM

@Topper727:

try
.

[ https://blocklist.sigmaprojects.org/api.cfc?method=getList&lists=spyware ]
.

Just added this list, it's only showing a Count of 1 tho.

Topper727 · Feb 10, 2015, 9:06 AM

add them all in a group is what I did so I not see how many each have. But I have them all and I get pretty good amount of blocks from those lists.. I also have deduplication on so all my lists are stripped of duplicates making them smaller too

SixXxShooTeR · Feb 10, 2015, 9:13 AM

Okay, ill give it a try. Tho I have been able to find out what lists are blocking what, like malwarebytes or deviantart.com, by having them displayed individually and not in groups. Once you visit a site you can see which lists are denying or blocking packets.

I also have de-duplication enabled.

Question, I see that you've selected "Unknown" in the ET IQRISK BLOCK LISTS and ET IQRISK Match LISTS. What does that do?

Topper727 · Feb 10, 2015, 9:30 AM

I made mistake when first setting that up. That is a paid subscription so it does nothing for me. I do not pay for it.

Click the thanks at top right of my message if I helped you

ch1ll1man · Feb 10, 2015, 3:03 PM

We've started using PFBlockerNG on a couple of our firewalls and are using the country block to keep some countries out. However there are a few IP ranges we would like to let through within those blocked countries and these IP ranges change weekly so we're pulling a txt file into an IPV4 alias via PFBlocker daily updates.

Everything so far is working great but the permit rule created by PFBlockerNG is

IPv4 * pfB_Cloudflare * * * * none pfB_Cloudflare auto rule

What we'd like that rule to say is

IPv4 * pfB_Cloudflare * AN_IP 80 * none pfB_Cloudflare auto rule
IPv4 * pfB_Cloudflare * AN_IP 443 * none pfB_Cloudflare auto rule

AN_IP = an internal IP of a server we have

What's the best advice on this for achieving that? If I edit the rule PFBlockerNG just destroys it on the Update.

marcelloc · Feb 10, 2015, 3:20 PM

@wavetune:

What's the best advice on this for achieving that? If I edit the rule PFBlockerNG just destroys it on the Update.

Did you tried alias only and then create a manual rule?

Cino · Feb 10, 2015, 5:10 PM

@marcelloc:

@wavetune:

What's the best advice on this for achieving that? If I edit the rule PFBlockerNG just destroys it on the Update.

Did you tried alias only and then create a manual rule?

I think that would be the best way to approach this. pfBlockerNG is meant to block all ports, if you need specific ports opened; then alias with a manual rule

McFuzz · Feb 10, 2015, 5:59 PM

I left it running overnight - plenty of blocks now :D

SixXxShooTeR · Feb 10, 2015, 6:04 PM

@Topper727:

I made mistake when first setting that up. That is a paid subscription so it does nothing for me. I do not pay for it.

Click the thanks at top right of my message if I helped you

I've been trying to find out how much a subscription cost for the IQRisk Lists but their website doesn't offer a price. How many people have this subscription?

The iBlock list subscription is only 9.99 a year and that is what I'm using.

McFuzz · Feb 10, 2015, 6:20 PM

@Topper727:

Suggestion if not already done. Put the block to block both for each list.

And I get a lot of blocks from it. Go surf around some bad sites and watch the numbers grow.

When you say 'block both' - do you mean block inbound and outbound?

q54e3w · Feb 10, 2015, 6:29 PM

@SixXxShooTeR:

@Topper727:

I made mistake when first setting that up. That is a paid subscription so it does nothing for me. I do not pay for it.

Click the thanks at top right of my message if I helped you

I've been trying to find out how much a subscription cost for the IQRisk Lists but their website doesn't offer a price. How many people have this subscription?

The iBlock list subscription is only 9.99 a year and that is what I'm using.

If you have to ask…. ;) ...when I enquired last year it around $500 per year I recall. There isn't a 'consumer' level subscription like Snorts either as it was abused.

SixXxShooTeR · Feb 10, 2015, 6:49 PM

@irj972:

@SixXxShooTeR:

@Topper727:

I made mistake when first setting that up. That is a paid subscription so it does nothing for me. I do not pay for it.

Click the thanks at top right of my message if I helped you

I've been trying to find out how much a subscription cost for the IQRisk Lists but their website doesn't offer a price. How many people have this subscription?

The iBlock list subscription is only 9.99 a year and that is what I'm using.

If you have to ask…. ;) ...when I enquired last year it around $500 per year I recall. There isn't a 'consumer' level subscription like Snorts either as it was abused.

lol I was thinking it's never a good thing when prices aren't listed. Kind of like when you walk into an art gallery.