How to create an OpenVPN client to IPredator?

spricer

I tried what not but I am always stuck with:

openvpn[22491]: UDPv4 WRITE [42] to [AF_INET]93.182.184.130:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #5 ] [ ] pid=0 DATA len=0

If I use OpenVPN GUI client on windows it connects instantly.
Here is IPredator conf file:
https://ipredator.se/downloads/openvpn/cli/IPredator-CLI-Password.conf
Any idea?

Thanks.

spricer

Further reading suggest that message appears if one side can not talk to another which to me does not make sense since I am able to connect from windows which is "deeper buried" inside network than pfsense. Just in case I opened 1194 port for whole range of address 93.182.128.0/18 on WAN side but still nothing.
I suspect that there is maybe problem by using "client certificate" (using "webConfigurator default") which is not used at all in IPredator configuration (only TLS and CA).
Is there a way to remove client certificate in web configurator?
I tried to remove it manually in /var/etc/openvpn/client.conf but it seems that web configurator has precedence.
I was shooting in dark by running openvpn manualy in shell with their conf file but there is no any screen output (usually should be) even though I see it running (ps ).
Any advice?

Thanks.

elseffo

Hi.
Did you get this to work in the end?
I ended up whit the same conclusion you did.

ololo123

i installed certificates, but there are some config lines , namely


nobind
auth-retry nointeract

tls-client
ns-cert-type server

keepalive 10 30
tls-cipher TLSv1:!ADH:!SSLv2:!NULL:!EXPORT:!DES:!LOW:!MEDIUM:@STRENGTH
persist-key
persist-tun
tun-mtu 1500
mssfix
passtos
verb 3

which i paste in "Advanced" section in https://192.168.1.1/vpn_openvpn_client.php?act=new

but it still dont work, any ideas?
why i cannot just upload .conf to config directly?