Squid+Dansguardian with Active Directory (NTLM) Single Sign On WORKING!!!
-
Ok, this problem is because libpopt_samba3.so and many other libs can not be found because they are in the path /usr/local/lib/samba
so you should add this path to the ldconfig-path or copy/link the libraries where they could be find. But now I have the errorShared object "libintl.so.8" not found, required by "libpopt.so.0"
And I cannot find libintl.so on my pfsense. So what I have to install to get this shared object?
Thanks in advance
Alex -
Again, dont know what the error was. Tody I find the libintl.so.8 and the other needed libraries. But still not working. In /var/squid/logs/cache.log:
ntlm_auth: error opening config file /usr/local/etc/smb4.conf. Error was No such file or directory
Which file or directory? /usr/local/etc/smb4.conf is there and is readable for others.
-
May be related to pbi pseudo jail build.
Are you trying to run net ads join and getting this error?
-
no marcelloc, the net ads join is working.
I try to go into Internet with the browser over the proxy. The the Browser ask me for username and password - but he doesnt accept and I see this line in the log.Yes I think its related to the pseudeo jail buid. But i dont know anything about this till now.
-
Did anyone else get this to work? I was able to get things working by:
- Copied all the libs to the /usr/pbi/squid-amd64/local/lib directory
- Copied the smb4.conf to the /usr/pbi/etc directory
- Added –configfile=/usr/pbi/etc/smb4.conf to the ntlm_auth parameters within the Integrations section of Proxy server service under Custom Settings
Now things are rocking out with AD just fine without prompting for a password.
-
Well;
Have pretty given up. I even tried a new install and
pkg install http://e-sac.siteseguro.ws/packages/amd64/8/All/samba36-3.6.3.tbz does not work..
pkg install samba36 works but end result
kinit: krb5_init_context failed: 22
Is all I get..
Would be wonderfull if someone would rewrite this for a new install..
TIA
Percy -
I'm suffering with getting a 2.2 install running as well.
Sifting through a lot of the last few pages has at least got the warnings to go away but no actual ntlm auth occuring.
+1 for a modification of the original tutorial in a seperate thread perhaps? -
Well;
Have pretty given up. I even tried a new install and
pkg install http://e-sac.siteseguro.ws/packages/amd64/8/All/samba36-3.6.3.tbz does not work..
pkg install samba36 works but end result
kinit: krb5_init_context failed: 22
Is all I get..
Would be wonderfull if someone would rewrite this for a new install..
TIA
PercyThe samba pkg you tried to download is for freebsd 8.x.
pfsense 2.2 uses freebsd 10.
-
I want to implement ldap kerberos squid authentication ! As far as i understand i wont use samba but why kdc is needed if i can use windows server kdc ?
-
Anyone?
-
I'm using it as a lab, I've created two VM on Vbox and it can view etch other, but I can't pass this part:
6. Services –> Firewall
a. Rules –> LAN tab – Create a proxy rule to allow TCP port 3128 to the LAN address for testing (will change later)
b. NAT –> Port Forward tab - Create a proxy port forward from LAN on port 3128 to the loopback adapter (127.0.0.1) for testingcould anyone show me how to do it?
-
I've also given up on this one getting back to pfSense 2.1.5. I would like to dig deeper on this one as I feel that I've been pretty close to achieving the solution but unfortunately at this time I have no time available at all to dedicate on this subject. :(
Once I have the time, if no one has found it yet, I'll redo it all again and document the changes.
-
Consegui fazer o Squid com NTLM. Funciona com o stable e com o squid 3!
https://drive.google.com/file/d/0BytRSGrf8eEXQzRvUXdNUUw2NTg/view
esse é o passo a passo.
espero que ajude
-
Consegui fazer o Squid com NTLM. Funciona com o stable e com o squid 3!
https://drive.google.com/file/d/0BytRSGrf8eEXQzRvUXdNUUw2NTg/view
esse é o passo a passo.
espero que ajude
Hey do you have an english translation for this? thanks.
-
Consegui fazer o Squid com NTLM. Funciona com o stable e com o squid 3!
https://drive.google.com/file/d/0BytRSGrf8eEXQzRvUXdNUUw2NTg/view
esse é o passo a passo.
espero que ajude
Also, does this implies Single Sign on? If not then how can i incorporate it with the set up? thanks.
-
First: I don't mean to steal this thread…but there is an easier way to do much of this. Unless you absolutely must use NTLM.
look at
http://sourceforge.net/projects/squidtrust/files/SquidtrustIII/or google "Squidtrust"
you will find a Perl authentication helper, and a workstation agent that can easily be integrated into a PfSense environment.
originally … I wrote the helper and agent to work on pfSense. I have been using them for over two years on a network w/800+ workstations and 2500+ users.the short version:
Install the perl helper on pfSense, configure it to poll the agent for your desired user credentials.
run the agent on all workstations via login scrpt/GPO
ta-da...transparent user authentication.read the docs for more detail.
How do you make this work? I have yet to have any success.
-
What's not working or what can't you get working ??
The client (SquidTrustIII) or the squid helper (perl script) side of things ??
-
What's not working or what can't you get working ??
The client (SquidTrustIII) or the squid helper (perl script) side of things ??
The perl helper can not contact the client even with the windows firewall disabled.
I keep getting "ERR" when running test via SSH.
The helper input in Squid causes it to crash when it is applied in the customer settings area. I have tried it in both 'Before auth' section and 'integration' section.
-
Great steps so far but im stuck at the point of joining the domain, i keep getting
cannot join as standalone machinecan anyone help with this?
