SquidGuard-squid3 can't start any more

sacaman

To make it working i should connect to the SSH console and start this command

[2.2-RELEASE][root@pfSense.xxxxxxxx.com]/root: squidGuard -C all -d
2015-01-30 21:41:10 [62896] New setting: dbhome: /usr/local/share/examples/squidGuard/blacklists
2015-01-30 21:41:10 [62896] New setting: logdir: /var/log/squidGuard
2015-01-30 21:41:10 [62896] Added User: root
2015-01-30 21:41:10 [62896] Added User: foo
2015-01-30 21:41:10 [62896] Added User: bar
2015-01-30 21:41:10 [62896] destblock good missing active content, set inactive
2015-01-30 21:41:10 [62896] destblock local missing active content, set inactive
2015-01-30 21:41:10 [62896] init domainlist /usr/local/share/examples/squidGuard/blacklists/porn/domains
2015-01-30 21:41:10 [62896] Error db_open: No such file or directory
2015-01-30 21:41:10 [62896] Going into emergency mode

CTRL +C

and squidGuard already start

Firzze

Hello,
Thank you for the command, but I'd like to automate it, how could I do?
sorry for my english ;D

sacaman

to do so

remove the squidGuard-squid3 version 1.4_7 pkg v.1.9.6

and install squidGuard-devel 1.5_1beta pkg v.1.5.6 reconfigure it

reboot and enjoy

crypto

the SquidGuard dev version installed and it's running but still not filtering.
I check the Squid setting and it reset the transparent proxy settings and SSL filtering.
After Setting the squid proxy transparent settings, it works :)

Firzze

@sacaman:

to do so

remove the squidGuard-squid3 version 1.4_7 pkg v.1.9.6

and install squidGuard-devel 1.5_1beta pkg v.1.5.6 reconfigure it

reboot and enjoy

But squidGuard-Devel does not work with squid3 when I reboot the pfsense with squid-devel both are stopped, with Squidguard-squid3 the problem is that the service is stopped squidguard and the only way to start is to squidGuard -C all -d

sacaman

hi,

try to setup the squid proxy to the transparent mode and reboot

irontec

Hi,

Same case here. We have a pfsense 2.2-RELEASE (amd64) built on Thu Jan 22 14:03:54 CST 2015. With the installed packages:

squid3 -> 3.4.10_2 pkg 0.2.6
squidGuard-devel -> 1.5_1beta pkg v.1.5.6

Transparent proxy mode on and the only way to make it work is to launch a blacklist update in the gui or in the shell with:
squidGuard -C all -c /usr/pbi/squidguard-amd64/local/etc/squidGuard/squidGuard.conf

The the squidguard works well.

Does anyone get this fixed?

Bye.

aityahiaidir

having the same problem, after resetting pfSense to factory settings and reinstalling the squid and squidguard package, all work normally

foetus

Same issues. Squid crashing / stopping or squidguard not filtering.

Did a clean install today with exactly same results.
Infuriating as it is, I have an exact same setup running without issues.

not planning on touching either package with a 10foot pole for a while till they are stable.

irontec

I would prefer no to reinstall the whole system. I've tried to uninstall the packages delete al related files, reboot and reinstall and the problem persist :(

irontec

Hi,

i've updated the system to the latest pfsense 2.2.1 and the problem persit :( I've done a workarround by creating a file in /usr/local/etc/rc.d/ with the content:

!/bin/sh
/usr/pbi/squidguard-devel-amd64/bin/squidGuard -C all -c /usr/pbi/squidguard-amd64/local/etc/squidGuard/squidGuard.conf &
/usr/local/sbin/squid -f /usr/pbi/squid-amd64/local/etc/squid/squid.conf -k reconfigure

With this workarround the squid/squidguard is running after system (re)start.

Squuiid

Yep, did a full re-install and installed squid3 and squidguard-devel and all is working, except antivirus on squid3.

UPDATE: Clicked SAVE twice on antivirus settings of squid3, addressed stated config errors in red, and now antivirus is working.

Snort, Squid3, and Squidguard-devel help contribute to make pfSense one hell of a firewall.