FTP Client Proxy Package

-flo- 0

Thanks a lot!!

I only need ftp once every few years like when some provider has support files only available via anonymous ftp. So as bad as ftp may be not being able to use it is a real pain.

-flo-

jimp

I removed the broken IPv6 setting and I added fields for source bypass and destination bypass.

At least that way, if you have a secure FTP server you could add it to the bypass list so that the proxy won't break it.

pfsenseo

Thanks a lot for your package !!!

It save me many days of troubleshouting…

I also think that I am not the only one in this case.

Hope that pfSense team will quickly correct this bug.

Thanks again.

Yan

matsan

Just want to chime in here - upgraded hardware and installed 2.2 and immediately got bitten by the lack of ftp-proxy.
This package saved tons of time during the hectic upgrade.

JeGr

I suspected that might be the case. Proxying IPv6 seems like a bad idea anyow. I may rip that option out next rev.

In environments, where users are trying to build a new IPv6 only network, that option may be very well received (for proxying IPv6 clients to IPv4 only servers). If that is possible, it would be nice to be included. Of course not needing FTP at all would be quite better… ;)

Greets

jimp

It wasn't a 6-to-4 style proxy or anything that interesting, it was for v6 to v6 only, which is pretty useless except maybe in the presence of strict outbound firewall rules that the proxy could help with.

digidax

How can I install this package?
Was going back to 2.1.5 and want now try to update to 2.2.1 with working FTP outgoing from LAN.

best regards
Frank

doktornotor

@digidax:

Was going back to 2.1.5 and want now try to update to 2.2.1 with working FTP outgoing from LAN.

Like any other package. System - Packages.

digidax

There is no package "ftpproxy".
"freeradius2" is the last, then "gwled" is the next one.
Will it be visible after I have done the update?

doktornotor

The package is for 2.2.x only…

jimp

Note for future posters to this thread:
This thread is for general feedback about the package (commentary, GUI notes, etc) – Problem reports should go into separate threads so they can receive proper/full attention without taking over this thread. Dropping a note here saying it didn't work for you is OK so long as it contains a link to a separate problem thread for further discussion.

Thanks!

kawaider

Hi! Sorry for my bad English.
I use FTP server on port 1221. In PFsense 2.1 I configure ftphelper with option debug.pfftpports. But in PFsense 2.2 I can't confirure packet "FTP client proxy" for work with port differing from 21. Help, please!

jimp

The ftp-proxy(8) daemon seems to only work properly with a server on port 21, so there does not appear be a way to accommodate that scenario at this time.

kejianshi

Whatever you do, don't use a vpn. That would be too easy…

corotte

Thank you very much for this package !! ;D

that should do the trick for some of my customers who are stuck with application that use "archaic" FTP Active client to update :)

Will try it in next maintenance 8)

lpandolfini

Thank you very much for this package!

I have a little problem with one WAN and multiple LAN, with different VIPs used for outgoing traffic (one per LAN), the post is this:
https://forum.pfsense.org/index.php?topic=91638.0

Thanks.
Luca

Marlenio

Hi,
is it possible to add more than one ip on bypass list?

jimp

@Marlenio:

is it possible to add more than one ip on bypass list?

Make an alias and put the alias name there.

Marlenio

@jimp:

Make an alias and put the alias name there.

Thanks in advance. :) :)

Marlenio

@Marlenio:

@jimp:

Make an alias and put the alias name there.

Thanks in advance. :) :)

I try. I made an alias with two Ip and put the name in "Proxy Bypass: Destination", restart service, but it doesn't works.

EDIT: alias works if declare IPs like a "/32" network, but not like single host. :)