Config Pf Sense to show only captive portal page.

[EMWEE]

Just create a zone on your OPT1 interface and your good to go.

[sujyo1]

thanks for reply…
I do not want to use DHCP server on OPT1 just want to pass wifi traffic from ap through opt1 with only captive portal. Should I use static ip on opt interface setup? Should I have to do anything into NAT/Rules...etc to pass the wifi traffic?

[EMWEE]

I don't know your subnet mask from the APs but it shouldn't be 10.10.10/24 since your WAN already uses that subnet.

U should use another subnet.

[Gertjan]

@sujyo1:

I do not want to use DHCP server on OPT1 just want to pass wifi traffic from ap through opt1 with only captive portal. Should I use static ip on opt interface setup? Should I have to do anything into NAT/Rules…etc to pass the wifi traffic?

And how should these AP-Portal-Wifi visitors obtain an IP ?
The portal can't work without a ststic IP, and its own DHCP server.

Btw : your wan is 10.10.10/24 - change your OPT1 interface to 192.168.1.0/24

[sujyo1]

Thanks for reply.
here what I want to accomplish. see attach pic


[sujyo1]

Thanks for reply Gertjan..

And how should these AP-Portal-Wifi visitors obtain an IP ?
From main router

The portal can't work without a ststic IP, and its own DHCP server.
Thanks. I was not aware of this!!

Btw : your wan is 10.10.10/24 - change your OPT1 interface to 192.168.1.0/24
I donot want to do double net.  Got it I have to do double net. or remove existing router and use pf as main router, set Opt to 10.10.10.0/24  and all ap to this subnet then turn on captive portal…

[EMWEE]

@sujyo1:

set Opt to 10.10.10.0/24  and all ap to this subnet then turn on captive portal…

No.

[Derelict]

Why not just renumber the OPT1 network?

[doktornotor]

@Derelict:

Why not just renumber the OPT1 network?

Way too simple… :P

[sujyo1]

@EMWEE:

@sujyo1:

set Opt to 10.10.10.0/24  and all ap to this subnet then turn on captive portal…

No.

Yes sir….The portal can't work without a ststic IP, and its own DHCP server.

Thank you guys...

[Gertjan]

Check:
Your LAN interface : 192.168.1.0/24 - ok, that the one by default. The LAN interface can have a DHCP server instance, or not.
So, make interface OPT1 (the portal interface) : 192.168.2.0/24 - active  a DHCP instance on it - and a DNS resolver. The activate the portal interface - chose a login method - add firewall rules to the OPT1 interface.

You can keep the WAN like 10.10.10.0/24

[sujyo1]

If I set opt1 ip to 192.168.2.0/24 and enable opt1 dhcp then, in this case I have to change all ap's static ips form 10.10.10.0/24 to 192.168.2.0/24 subnet.

[Derelict]

Administering a network sometimes involves a little work.

[sujyo1]

yap you right…not a professional like you guys...but try to find short cut and learn something new!! Thanks for reply