Tutorial: Configuring pfSense as VPN client to Private Internet Access

[Derelict]

You'll have to tell us what all the firewall rules are and what all the local networks, OpenVPN tunnel networks, etc, are.

[pfanatic]

This is my settings for VPNing to my network:

I have a Firewall: Rules – WAN
ID =
Proto = Ipv4 TCP
Source = *
Port = *
Destination = WAN address
Port = 1194 OpenVPN
Gateway = *
Queue = none
Schedule = *

and a Firewall: Rules - OpenVPN
ID =
Proto = Ipv4 *
Source = *
Port = *
Destination = *
Port = *
Gateway = *
Queue = none
Schedule =

also the OpenVPN: Server is
Protocol / Port = UDP / 1194
Tunnel Network = 172.16.2.0/24

[Derelict]

That doesn't give anyone enough information to help you.  There is probably a routing problem between all the networks involved.  You only told us what the tunnel network is.

[pfanatic]

could you be more specific as to what information i could provide?
I can provide some screenshots if that helps but i am not sure what you are looking for.

thanks,

[Derelict]

You'll have to tell us what all the firewall rules are and what all the local networks, OpenVPN tunnel networks, etc, are.

[s3rv3rn3rd]

I've been working on an issue for a while now and I made significant progress through a person on reddit but I'm at another hurdle.

I have this setup with PIA and PFsense. I have it set to push 2 IPs through the VPN and everything else goes through my WAN. That all works great.

The issues I'm having is that I have 5 VLANs and the two IPs that are going through the VPN are not able to communicate with the rest of the devices on the network that are not within the same VLAN. I think this is some sort of firewall rule, but nothing I have tried or found here or on the Google has worked.

Each VLAN has a rule at top that allows all traffic from the 2 IPs through the VPN Gateway. Then there is a second rule that is allow all from anywhere through the default gateway. The LAN interface is also including these same rules (although without them it did not have an impact).

[Derelict]

You need to pass traffic to your local networks above that rule.

https://doc.pfsense.org/index.php/Bypassing_Policy_Routing

[s3rv3rn3rd]

When I put the rule permitting all traffic first, it no longer passes the traffic through the VPN as intended. It allows the VLANs to communicate, but it won't keep it on the VPN.

[Derelict]

Read the link again.  That's not what it says to do.  You need to pass only to local destinations.  Or maybe make an alias and pass only to that.  Or maybe make an alias for all private addresses and pass only to those:

10.0.0.0/8
172.16.0.0/12
192.168.0.0/16

[s3rv3rn3rd]

Got it.

Set that up on each of the VLANs (I have not added it to the PIA INterface or the OpenVPN interface) and that seems to be working beautifully.

Thank you!

[Derelict]

Set that up on each of the VLANs

I assume you mean set that up for each of the VLANs.  The rule(s) only need to be on the interface that the hosts being routed to the VPN are on.

[s3rv3rn3rd]

Yes - I set it on each of the VLANs. currently I have 2 of the VLANs with VPN traffic and that might expand. It appears to be working great now.

Thanks!!

[Thisisvv]

Hello All,

I am newbiew here. Just got pfsense working on vmware on my i7 desktop. I am unable to connect to PIA. I have tried multiple times the above mentioned process but nothing happens. You can see from VPN start , seems to be every service is working.

Now when i go to Status: System logs: Gateways. There is absolutely nothing….

I have attached most of my screenshots, please let me know where i could use help


[doktornotor]

No idea really what's that "free roam" doing on your WAN ??? ??? ??? Regardless, that interface tells nothing regarding the topic here.

[Thisisvv]

So am i at wrong place?

[doktornotor]

For configuring policy routing for LAN clients? Yeah, WAN is surely wrong place for that.

[TDJ211]

@YoMan:

The tutorial states to turn off hardware encryption and to use BL-128.  Is there anyway to use AES-256 instead and use hardware encryption?

Bump….I would like to know this as well

[Derelict]

Not if PIA doesn't support it.

[cableguy]

first post so scuse the newbie here….

what are the speeds you guys have been getting vs. ddwrt flashed routers? I recently upgraded to gigabit fiber, and was looking at building a machine this weekend since 40mbps through a Nighthawk leaves me a little disappointed.  I looked at the SH4860 as well, but I'd rather built something myself if I can hope for anything atleast 150-200mbps

[Bobbob]

Hi all, newbie with a query here

I've followed this guide to get a vpn setup and working fine for normal use, my issue is that port forwarding just wont work as advertised, I have literally gone through a dozen guides, they all say basically the same thing and I swear I've done it all, but nowt actually gets through…  My VPN provider has forwarded the relevant ports to me and says its all good on their end.

Do I need NAT reflection to forward a port through the vpn to a LAN IP?  Are my NAT rules ok? Please help, screenshots are here http://imgur.com/a/iZOwd , I'm losing my mind here…