Opt1 wireless guest no connectivity
-
Hello there,
i have added an interface and assigned an IP address for it, Sat DHCP server for Opt1 secondly i`ve created a firewall rule to allow traffic coming from my opt1 to the internet, connected my AP to opt1 interface no internet connectivity, though i can ping under Diagnostics on my Pfsense.
Clients can get IP addresses from the pools i
v specified but they can
t browse the webFW rule snapshot
-
You need ! (NOT) LAN net. You did the exact opposite.
-
You need ! (NOT) LAN net. You did the exact opposite.
Hello doktor,
what
s the exact rule i
m confused in here iv tried different rules i
v also set * to source and destination with no hope. -
Well, the exact rule is what I already described above. Not sure what trouble are you having with seeing that you did set up exactly the opposite of your goal or what is the trouble with checking the NOT checkbox under destination.
-
I did as you instructed i
v even allowed everything to pass but i still can
t browse the internet through my opt1 interface. -
Kindly post a screenshot of what you have done.
-
Thank you for your input Dok,
-
Yeah, that is totally wrong. The destination should be set as NOT LAN net for the purpose of what you are stating in the description. Please, spend couple of minutes looking at what you are setting up.
Other than that, that rule allows any outbound IPv4 traffic from WIFIGUEST. Start looking somewhere else regarding your "cannot browse" trouble.
-
While I hear ya dok, I think the OP problem is that they can't get internet access. While that rule he has currently on wifiguest would not stop him from talking to lan net, it should allow them internet access which I believe is what the OP is having a problem with.
This is really so freaking drop dead simple – I am always amazed at the number of people that have issues.. OP did you put a gateway on your opt1 interface?
This is really click click simple.. Can your clients on wifi guest ping the pfsense ip on the wifiguest interface?