FTP Client Proxy Package
-
Thank you very much for this package !! ;D
that should do the trick for some of my customers who are stuck with application that use "archaic" FTP Active client to update :)
Will try it in next maintenance 8)
-
Thank you very much for this package!
I have a little problem with one WAN and multiple LAN, with different VIPs used for outgoing traffic (one per LAN), the post is this:
https://forum.pfsense.org/index.php?topic=91638.0Thanks.
Luca -
Hi,
is it possible to add more than one ip on bypass list? -
is it possible to add more than one ip on bypass list?
Make an alias and put the alias name there.
-
-
-
jimp-
Just wanted to thank you wholeheartedly for this package. I know FTP is 'discouraged' but sadly we can't always force these decisions on users when legacy systems are in place and working. This package has saved us a lot of headache.
bravo sir
-
Dear Jimp,
thank you VERY MUCH for this great package!
Is it possible to modify package and GUI to realize an explicit proxy environment?
Best wishes
-
Have an issue with 2 in-series PFSense boxes… the 2nd one is on a LAN (Opt1 on PFSense #1 / all traffic in-and-out for that LAN on WAN Virtual IP and NAT'd through to 2nd pfSense) and needs to get out to WAN for Active FTP Session. If I set the 2nd pfSense FTP Client Proxy to WAN external address it won't connect at all, but if I set it to default (WAN - which is actually LAN going to Opt1 in first pfSense), it connects but will not open data port.
Hope this make sense - any ideas?
-
@klingone:
Is it possible to modify package and GUI to realize an explicit proxy environment?
Not that I'm aware of. If you need an explicit proxy, I believe that squid can handle that.
-
@tmc:
Have an issue with 2 in-series PFSense boxes… the 2nd one is on a LAN (Opt1 on PFSense #1 / all traffic in-and-out for that LAN on WAN Virtual IP and NAT'd through to 2nd pfSense) and needs to get out to WAN for Active FTP Session. If I set the 2nd pfSense FTP Client Proxy to WAN external address it won't connect at all, but if I set it to default (WAN - which is actually LAN going to Opt1 in first pfSense), it connects but will not open data port.
I use it here with multiple boxes in series and it's OK but I don't use VIPs or send it out an alternate WAN (just the default WAN at my edge, not my second WAN).
When using load balancing or multi-wan, the FTP traffic (including high data ports) would have to exit the default WAN or the proxy won't work correctly.
-
I've been banging my head against a brick wall trying to get an old FTP client to work properly. Thank you so much for your work, I appreciate it.
-
Hi, i need some help on configuring FTP Client Proxy Package in order to give ftp access on my network. I have 2 wan (WAN1 & WAN2) and one LAN interface.
Local Interface: I select only LAN ?
Anonymous Only: Not checked
Source Address: I put one of the two public WAN ip address?
Proxy Bypass Source: None
Proxy Bypass Dest: None
Bind Port: None
Maximum Sessions (Default: 100): None
Traffic Shaping Queue: None
Rewrite Source to Port 20 : Not checked
Idle Timeout (Default: 86400) : None
Log Connections : Not CheckedDo i need any other configuration? I use filezilla ftp server.
sorry but my knowledge is very basic on this staff.
-
Do i need any other configuration? I use filezilla ftp server.
This package is for FTP clients using active mode behind pfSense.
https://doc.pfsense.org/index.php/FTP_without_a_Proxy
-
Many thanks for building this package, install, enable, assign client interfaces ALL DONE. You safed my day! thanks a lot. sven
-
Is this suppose to add rules needed to make it work? Or do I need to the config manually as listed here?
http://www.freebsd.org/cgi/man.cgi?query=ftp-proxy&sektion=8
I ask as it appears that none are added…
using 2.2.4-RELEASE (amd64) FTP Client Proxy 0.2.1
-
There is no need to add anything manually. Install the package and pick the settings. If you have a problem, please start a new thread for assistance.
-
Why oh why doesn't pfSense bundle with this plug-in, I have been trouble shooting in the other end and then it was pfSense the entire time.
Thanks a bunch for this jimp - it working absolutly perfect and finally my Check Point has stopped yelling "Unable to Parse FTP PORT/227 command - header IP different from command IP".
-
I have installed FTP Client Proxy Package 0.3 Beta and setup on LAN.But filezilla can't connect it.The filezilla message is follow:
Status: Resolving address of ftp.aspa.idv.tw
Status: Connecting to 219.85.218.78:21…
Status: Connection established, waiting for welcome message...
Status: Insecure server, it does not support FTP over TLS.
Status: Connected
Status: Retrieving directory listing...
Status: Server sent passive reply with unroutable address. Using server address instead.In older version can use it.How to fix it?My ftp server is used passive mode.
-
Please start a new separate thread for problems/troubleshooting.
