Can select ip range in firewall rule??
-
HI , i want select ip range in firewall rule . like ( 10.0.0.1 10.0.0.10) …
There are single host or alias only and i have 60 users. thanks
-
U can create a alias from a text file with pfBlockerNG.
-
Well you do not really need any pfBlockerNG to create a single alias. Plus, this is completely automated under Firewall - Aliases - IP tab:
Host(s): "You may also enter an IP range such as 192.168.1.1-192.168.1.10 or a small subnet such as 192.168.1.16/28 and a list of individual IP addresses will be generated."
Network(s):" "You may also enter an IP range such as 192.168.1.1-192.168.1.254 and a list of CIDR networks will be derived to fill the range." -
thanks for replay >
Firewall - Aliases - IP tab }} When choosing a host and enter an IP range such as 192.168.1.1-192.168.1.20 mask by default 32 i can't change it
to /24 -
Why would you change it? Just press save.
-
Because my subnet mask on my lan
192.168.1.0 /24
255.255.255.0 -
OMG. So use Network(s) alias and enter the CIDR! The original request was for IP range which is exactly what I described. >:( ::)
Not to mention that you do not need any alias for your LAN net (or any other interface subnet) at all. It's available in the firewall rule's source/destination dropdown menu as "LAN net" (or SomeOtherInterfaceName Net).
Hosts-type IP range:
Save! Result:
Networks-type IP range:
Save! Result:
Done!!! Magic!!! 5 seconds job!!! Described in the GUI. Sigh.
-
…just to add:
You can also simply enter, let's say
10.80.3.0/28
...and the alias will be created for all IP's in the subnet (does not matter that there is /32 greyed out in the entry mask)
-
And if you have a bunch of hosts, subnets, ranges with or without descriptions you can also quickly paste them into firewall_aliases_import and it generates a filled out alias with all the same sort of stuff as entering it field by field, row by row in the firewall_aliases_edit GUI.