Wireless cards/chipsets confirmed working 802.11n and STABLE with pfsense 2.2

rjcrowder

I've never used it's WiFi card support, it seems quite silly to me. Why bother setting up another interface and having another part in my gateway server when the odds of the server being in a good location for a wireless access point are darn close to zero anyway? Frankly, I think pfSense should get rid of the WiFi support entirely to allow them to focus on useful functions, but that's just my over-opinionated opinion :)

I"d agree with you for it's primary market… However, I've created a rebranded and simplified version for home use (rewrote and/or eliminated a bunch of the screens) that is focused on firewalling and internet content filtering (Dansguardian/squid). For the typical home user, having an "all-in-one" device that includes wireless (no need for an access point) would be very beneficial.

All of that said, I'm about to give up. Even in 2.2, the WiFi support in in pfSense seems very immature and unreliable. The latest issue I've run into is that changing the channel sometimes causes the machine to core dump and reboot!

jimp

With any wireless issue (especially a crash), the first thing to do for a problem is to attempt to reproduce it on FreeBSD directly. Odds are it's a driver issue or something there which pfSense has no control over.

Though there has been at least one person that reported wireless crashes until they removed traffic shaping (altq). Wireless in FreeBSD has come a long way but it's still far from perfect. It's worked fine for me though.

Legion

@rjcrowder:

For the typical home user, having an "all-in-one" device that includes wireless (no need for an access point) would be very beneficial.

This is my use case. My pfSense box is next to the TV, centre of the living area, perfect location for wifi. Having said that, I'm still on 2.1.x with AR928x.

kop316

WLE200NX 802.11n/a/b/g miniPCI Express Card

Vendor and Model: Unknown
Chipset: Atheros XSPAN family chipset AR9280
Form factor: mini pciE half
Version of pfSense: 2.2 RELEASE

Note: I was using snapshot, and when I upgraded, it would not work. I ended up reinstalling pfsense 22 release from scratch, then it worked.

cmb

We've imported FreeBSD 11-CURRENT's Atheros driver and net80211 bits for 2.2.1. Thus far in our testing, things work better than ever. We'd appreciate additional testing. The latest snapshots available at snapshots.pfsense.org include that.

zsolty_szasz

Hi
I bought a TP-LINK Model No. TL-WN51ND, 32-bit PCI, Up to 300Mbps, dual antenna type, Operating Systems: Windows XP, Vista, 7 :P

Pfsense version is:

$ uname -a
FreeBSD pfSense.szasz.local 10.1-RELEASE-p6 FreeBSD 10.1-RELEASE-p6 #0 b69ba8f(releng/10.1)-dirty: Fri Mar 13 08:37:46 CDT 2015     root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10  amd64

My wifi card type:

$ dmesg | grep ath
ath0: <atheros 9227=""> mem 0xf1080000-0xf108ffff irq 18 at device 2.0 on pci1
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9227 mac 384.2 RF5133 phy 15.15
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
wlan0: changing name to 'ath0_wlan0'
ath0_wlan0: discard frame w/o leading ethernet header (len 6 pkt len 6)</atheros>

Status wireless:

Client:
Laptop: Dell Latitude E6410, Wifi: Intel(R) Centrino(R) Advanced-N 6200 AGN #2

Upload/Download test:

Thanks to Adrian Chadd, pfsense, FreeBSD!

tester100

Hi guys

My atheros still crashing with the stuck beacon even with the pfsense2.2.1 version

after a few days it running gives error of the stuck beacon here is a txt log of the crash report

i have to reboot the pfsense in order to work

attached log error

[Crash Log pfsense.txt](/public/imported_attachments/1/Crash Log pfsense.txt)

ak

Atheros AR9287 Mini PCIE Half Height - works but stops after a period of time

http://www.ebay.co.uk/itm/300893674625?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I have this working, but after a day it stops connections. Disable, apply and then Enable again and its fine. I had the key regen intervals set to 3600 and 7200 and it would last about a day or so (did this to reduce the log files filling up with regen key lines and losing other useful important information). Reduced the times to 600 and 3600 and it lasts a little over 2 days.

zsolty_szasz

tester 100: Upgrade to pfsense 2.2.2 and try setting sysctl dev.ath.0.hal.force_full_reset=1

Voidburn

D-Link DWA-556 working and stable on 2.2.3:

uname -a
FreeBSD serenity 10.1-RELEASE-p13 FreeBSD 10.1-RELEASE-p13 #0 c77d1b2(releng/10.1)-dirty: Tue Jun 23 17:00:47 CDT 2015     root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10  amd64

dmesg | grep ath
ath0: <atheros 5418="">mem 0xfe8f0000-0xfe8fffff irq 16 at device 0.0 on pci3
ath0: [HT] enabling HT modes
ath0: [HT] RTS aggregates limited to 8 KiB
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR5418 mac 12.10 RF2133 phy 8.1
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00d0</atheros>

IuZ

Vendor and Model: Atheros AR5B225 WB225
Chipset: Atheros AR9485
Form factor: Mini-PCIe (half-size)
Version of pfSense: Pfsense-2.2.5 amd64

https://wikidevi.com/wiki/Atheros_AR5B225

If I have time, I'll post more informations.