PfBlockerNG

Mr. Jingles

Hi BB :-*

1. The errors we were emailing about appear gone now (?). I had two lists disabled for a week, enabled them yesterday and I think I don't see any errors anymore ( ??? ).
2. I have this weird thing with the dashboard widget: if I add it, it shows up twice. If I remove one of them (the x in the right corner) both are gone. I've attached a screenshot. Latest pfBlockerNG 1.0.9, pfSense 2.2.1.

Would you have any idea?

Bye ;D

pfblockerNG_double_widget.jpg_thumb

cyberbot

after reading this thread . i've installed the latest version on 2.2.2 pfsense 64 bit
after i enable the the pfblockerng the internet stops working.
i am in europe and deny both inbound and outbond of other countries. but somehow after i enable the package my internet stops working. but i can vpn to the box.
any suggestions what i am doing wrong ?

LinuxTracker

@cyberbot:

after i enable the the pfblockerng the internet stops working.
i am in europe and deny both inbound and outbond of other countries. but somehow after i enable the package my internet stops working. but i can vpn to the box.
any suggestions what i am doing wrong ?

When the Internet stops working, can you ping domains? Can you ping external IPs?

Can you give a screenshot of your LAN rules?

Also make sure your country isn't one in the Top 20 countries tab.

tim.mcmanus

Is this package 2.2.3-friendly? I upgrade to 2.2.3 and assume I need to reinstall the package because the widget puked code all over the Dashboard.

![Screen Shot 2015-06-25 at 8.48.24 PM.png](/public/imported_attachments/1/Screen Shot 2015-06-25 at 8.48.24 PM.png)
![Screen Shot 2015-06-25 at 8.48.24 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-06-25 at 8.48.24 PM.png_thumb)

phil.davis

That should only happen if you login to the dashboard while packages are reinstalling in the (minutes…) after the upgrade reboot.
Once all packages have installed themselves then those files will exist. A refresh of the dashboard should clear it.

tim.mcmanus

@phil.davis:

That should only happen if you login to the dashboard while packages are reinstalling in the (minutes…) after the upgrade reboot.
Once all packages have installed themselves then those files will exist. A refresh of the dashboard should clear it.

It's still angry. Rebooted the firewall too because of another unrelated upgrade issue. I'll reinstall and that more than likely should fix it.

LinuxTracker

@tim.mcmanus:

Is this package 2.2.3-friendly? I upgrade to 2.2.3 and assume I need to reinstall the package because the widget puked code all over the Dashboard.

I did one so far and pfBNG widget is intact. You aren't working with BBCan177's pfBNG beta, are you?

tim.mcmanus

@LinuxTracker:

@tim.mcmanus:

Is this package 2.2.3-friendly? I upgrade to 2.2.3 and assume I need to reinstall the package because the widget puked code all over the Dashboard.

I did one so far and pfBNG widget is intact. You aren't working with BBCan177's pfBNG beta, are you?

Yes, I am working with the beta. My upgrade had one unrelated issue, so this could possibly be an artifact of a less-than-perfect upgrade on my end.

meruem

when using "Alias Deny", the "Alerts" tab doesn't show any block logs like I think it would.

The log seems weird.. it grows and shrinks with each update… shouldnt it just be one long list with the max rows setting? It also says this at the bottom "Found 11 Alert Entries - Insufficient Firewall Alerts found."

The firewall log seems like it's working against the block list correctly using the alias I set up, but it is not as good because it doesnt give me any indication of in the firewall log that the block was because of the alias

LinuxTracker

@tim.mcmanus:

Yes, I am working with the beta. My upgrade had one unrelated issue, so this could possibly be an artifact of a less-than-perfect upgrade on my end.

Last night, I ran into the same problem with the beta of pfBNG.
As pfSense went through it's post-upgrade package re-installations, it uninstalled pfBNG-beta but couldn't reinstall it with the package settings set to default.

In this case I put the regular pfBNG package back in for now and my widget is behaving.

LinuxTracker

@meruem:

The log seems weird.. it grows and shrinks with each update… shouldnt it just be one long list with the max rows setting?

I'm not clear what you mean.
I think, the Alerts tab pulls it's data from Status: System logs: Firewall, because clearing the Firewall Log clears the Alerts tab.
Do you see any correlation between the weirdness in the Alerts tab and data displayed in Status: System logs: Firewall?

@meruem:

It also says this at the bottom "Found 11 Alert Entries - Insufficient Firewall Alerts found."

You'll get that if the number of displayed entries is less than the value in the Alert Settings

@meruem:

The firewall log seems like it's working against the block list correctly using the alias I set up, but it is not as good because it doesnt give me any indication of in the firewall log that the block was because of the alias

I often have discrepancies in the Alerts tab where I have an incorrect value in the List column - that is - the displayed list isn't in the IPv4 Alias that's noted in the Rule column (it's in a different IPv4 Alias).

Sometimes setting/unsetting deduplication->cron update sets that right.
Other time deleting the associated Firewall Rule and recreating fixes it for a while.

BBcan177

@meruem,

Did you click the checkbox in the firewall rule to enable "logging"?

meruem

Thanks for the replies. I guess my issue was that, I was seeing a ton of firewall block entries in the firewall logs and I couldnt tell if they were from the pfBlockerNG Alias or the regular firewall. I found http://i.imgur.com/gdRMDRK.png "Filter Descriptions" and i set it to "Display as Column". So now when I look at the firewall logs, it tells me if it's from the pfBlockerNG alias or "Default deny rule IPv4" (for example).

after clearing the logs .. the alerts tab seems to be working now, with these settings http://i.imgur.com/mOmPLLc.png

wcrowder

@tim.mcmanus:

@LinuxTracker:

@tim.mcmanus:

Is this package 2.2.3-friendly? I upgrade to 2.2.3 and assume I need to reinstall the package because the widget puked code all over the Dashboard.

I did one so far and pfBNG widget is intact. You aren't working with BBCan177's pfBNG beta, are you?

Yes, I am working with the beta. My upgrade had one unrelated issue, so this could possibly be an artifact of a less-than-perfect upgrade on my end.

I am also, if you are working with beta's you must expect this occasionally. Usually I do a "Forced Reload" after every update. If that doesn't work out correctly. I simply turn off pfBlockerNG_Dev clicking of the "Enable/Disable" and "Keep Settings" check boxes. Wait a few minutes, turn them back on, and then simply "Force Reload". Fixes 100% of the problems… :)

A Former User

I have a couple questions:

Can PFBlockerNG work with lists in p2p.gz format? I didn't see it listed in the IPv4/IPv6 tabs.

Also can PFBlockerNG use snort lists for IP blocking?

Thanks.

cyberbot

Thank you for the package much appreciate it .
after applying the settings on the pfBlockerNG my internet stops working,
i've followed this video for the setup but after i enable pfBlockerNG the internet stops working

https://www.youtube.com/watch?v=vgM5JRo575U

Mr. Jingles

@cyberbot:

Thank you for the package much appreciate it .
after applying the settings on the pfBlockerNG my internet stops working,
i've followed this video for the setup but after i enable pfBlockerNG the internet stops working
https://www.youtube.com/watch?v=vgM5JRo575U

I scrolled through that vid but, and sorry to sound like I do ( ;D ) but that is the usual useless non-tuto, of which you can find a zillion; they never even show it works. They'd better of going out walking the dog than wasting their - and all the other populants of this earth - time.

That aside: do you have any floating rules generated in the firewall? What do your firewall logs show you?

Your much better of reading this (yes, long, I know :-[ ) thread, where BB has added tons of information.

If you don't want to waste so much time reading this thread, remember this: BB wasted his time answering in this thread ;D

Mr. Jingles

**To all, just a kind informational note:

rumor has it BB is currently quite busy with extremely important stuff, so expect some delays in him answering here.**

Jamerson

i am having the same issue can't get the internet working after the pfblockerNG is enabled.
Firewall rules from the LAN are allowed to everything,
from the WAN is as usually allowing the OPENVPN.

cyberbot

@Mr.:

@cyberbot:
Thank you for the package much appreciate it .
after applying the settings on the pfBlockerNG my internet stops working,
i've followed this video for the setup but after i enable pfBlockerNG the internet stops working
https://www.youtube.com/watch?v=vgM5JRo575U
I scrolled through that vid but, and sorry to sound like I do ( ;D ) but that is the usual useless non-tuto, of which you can find a zillion; they never even show it works. They'd better of going out walking the dog than wasting their - and all the other populants of this earth - time.

That aside: do you have any floating rules generated in the firewall? What do your firewall logs show you?

Your much better of reading this (yes, long, I know :-[ ) thread, where BB has added tons of information.

If you don't want to waste so much time reading this thread, remember this: BB wasted his time answering in this thread ;D
[/quote]

thank you for your answer.
there is no particular firewall rules to block the internet. everything works fine untill the pfblocker is activated and stops things working.