Rule Created, where? when?
-
@cmb:
The rule's on WAN. It's created by the OpenVPN setup wizard, or manually created if you didn't use the wizard.
OK, thank you.
Port 1194 was not open so I deleted the rule, created it again. But, it is still not open. Is there something I should know about this?
-
Post the screenshot of the WAN rules.
-
Post the screenshot of the WAN rules.
Do you need all the rules? As far as the rule for the vpn, this is it: I just did a cut and paste of the line.
I tried moving it to 1193 to see if that port would be open. It wasn't.
UDP * * WAN address 1193 * none OpenVPN Road Warrior Server wizard
-
Do you need all the rules?
Obviously. Because if you did it right, then it'd be working out of the box.
-
Do you need all the rules?
Obviously. Because if you did it right, then it'd be working out of the box.
Yes, gotcha, attaching a screenshot of the rules, hope this works
-
Uhm…
1/ What pfSense version is this???
2/ Do you have any rules on the OpenVPN tab? -
Uhm…
1/ What pfSense version is this???
2/ Do you have any rules on the OpenVPN tab?This is version 2.0. I'm using this version because in a later version I couldn't get ftp (regular ftp) to work, I needed to allow incoming ftp connections to work.
There are two rules in the OpenVPN tab, this is cut and paste, these entries were automatically created by the wizards.
-
-
-
-
-
- none OpenVPN Road Warrior wizard
-
-
-
-
-
-
-
-
-
- none OpenVPN Road Warrior Server wizard
-
-
-
-
-
-
This is version 2.0.
emits some unarticulated sounds and leaves…
https://doc.pfsense.org/index.php/Versions_of_pfSense_and_FreeBSD
-
This is version 2.0.
emits some unarticulated sounds and leaves…
https://doc.pfsense.org/index.php/Versions_of_pfSense_and_FreeBSD
Well, would you, or anyone, happen to know if the latest version supports running an ftp server?
I could not get incoming ftp connections to work, in 2.2.3. It would allow connections, but no data transfer, it seemed.
Thank you
-
Every version supports running a FTP server. For 2.2.x, see https://doc.pfsense.org/index.php/FTP_without_a_Proxy or the FTP proxy package.
I'm guessing your testing as to whether the port is open is bunk. Trying to telnet to it? Can't do that with UDP ports.
-
And still-
2/ Do you have any rules on the OpenVPN tab?
Then go to status/openvpn and post whats there.
Got to status/system logs/openvpn and post what is there.
