Cannot get remote OpenVPN working

[cyberbot]

@Jakeyg:

here is the rule on the firewall

are you using pfsense as gateway ?
if pfsense facing the internet ?
have you reinstalled openvpn ?

[vinneo]

Jakeyg I had this error several times, please post your openvpn server configuration and your firewall wan rules.

[viragomann]

Post the server log after you tried to start the remote vpn service.

[Jakeyg]

Okay I have attached just about all the config screen shots i can.  hopefully theres something in there you guys can see that i cant.

I uninstalled openvpn export, but that didnt help.  I have no idea how to reinstall the openvpn service, ill have a look around to see if i can find info on how to do that.

Thanks everyone for your help.  Its very much appreciated!

[Jakeyg]

Also when i do run ps auxww | grep openvpn this is the result….

root  16465  0.0  0.1  21728  5064  -  Ss    8:53AM  0:01.06 /usr/local/sbin/openvpn --config /var/etc/openvpn/server1.conf
root  16609  0.0  0.1  21728  5076  -  Ss    8:53AM  0:06.44 /usr/local/sbin/openvpn --config /var/etc/openvpn/server2.conf
root  61066  0.0  0.1  17136  2644  -  S    11:16AM  0:00.00 sh -c ps auxww | grep openvpn 2>&1
root  61467  0.0  0.1  18876  2376  -  S    11:16AM  0:00.00 grep openvpn

[johnpoz]

Where is your server Cert??  When you go through the wizard it would create your server cert.

This is really clickity clickity thru the wizard and you have a running openvpn server..

[Jakeyg]

viragomann - Im not 100% up to speed on pfsense or freebsd, so which log do i need to show?  Can i just download it from the webgui?

Cyberbot - are you using pfsense as gateway ? Yep its a gateway
if pfsense facing the internet ? Yep sure is
have you reinstalled openvpn ? No, i couldnt figure out how to do it, and openVPN is working with the remote sites that use a pre shared key using a site-2-site configuration as opposed to a client server architecture.

johnpoz - good spot, i didnt have one on that configuration, but i have redone all the steps a few more times and created the server cert, but unfortunately the problem persists.

[Jakeyg]

So all site to site OpenVPN setups all work.  That is
peer to peer(ssl/tls)
peer to peer(shared key)

None of the remote options work
remote access (SSL/TLS)
remote access (user auth)
remote access (SSL/TLS + user auth)

Is there some setting that im missing that switches off remote access?  Or is it a bad install of openvpn?

[divsys]

If you can get a S2S connection working (SSL/TLS or shared) then there's nothing wrong with OpenVPN on pfSense.

It's much more likely that your problem is in the Certificate setup.

My suggestion:

(1) Leave the S2S SSL/TLS conx running.
(2) Make Sure you have a CA for the Remote conx server you will create.
(3) Make Sure you have a Server Certificate for the Remote conx server you will create.  It must use the CA from (2).
(4) Add a new User Certificate for the client computer.  It must use the CA from (2).
(5) Add a NEW Remote SSL/TLS server running on a DIFFERENT port# than (1) and use the Certificate from (3).
(6) Export the Client package for the User Cert created in (4)
(7) Install the Client package on a machine and test.

As mentioned earlier, this is a very basic operation and is usually fairly painless.

[Jakeyg]

Thanks everyone for your help.  I have solved the problem.

The reason it wasnt working is becuase i was putting a /30 network in the tunnel network, but using a /24 in the local network.  As soon as i changed this, it came up in openvpn status.

Thank you everyone so much for your help.  Its communities that make products extra good, and this is one hell of a product!