PfSense 2.2.3 - Internet is very slow via Squid3

gdsnytech

Could this change to disk sync also be the issue for my listening queue problem with squid? –> https://forum.pfsense.org/index.php?topic=95873.0

At least as soon as I disable disk sync, the listen queue size drops to zero. I compared my /etc/fstab from backup with current one and this sync options wasn't present before.

Maybe this option creates big performance impact on RAID systems. My secondary CARP node - also running 2.2.3 and sync option enabled - does not have this problem, but doesn't have RAID either.

It is definitely a RAID issue. Squid caching performance suck on a RAID. Especially with the 'mount sync' option. Just edit your /etc/fstab file with mount option 'nosync' with 'Edit File' in 'Diagnostics'. Save and reboot the box. When it comes back check fstab to make sure that the change is still there.

Other mod changes that i made were to 'Systsm> Advance> System Tunables>'

Tunable name Value
vfs.read_max from 32 to 128

https://doc.pfsense.org/index.php/Squid_Package_Tuning

Created
kern.ipc.nmbclusters 32768

created the above ONLY if you are using the 'diskd' 'Hard disk cache system' setup in Squid. Which requires you to copy ipcs and ipcrm from a FreeBSD 10.1 ISO /usr/bin/ to pfsense /usr/local/bin

also reboot and check after reboot to make sure that the settings are still there.

Squid is 'flying right now'. Well sort of. But the 'nosync' boot option in fstab does make a BIG different.

I am running squid in a production environment.

mesro09

i have already this problem but i dont have any raid config
everything was good working until i update from 2.2.2 to 2.2.3 and intennet put so slow now i am finding solution i already tried to reinstall squid and squidguard but nothing is solved now i dont have any filter
i installed new one with fresh install pfsense 2.2.3 but with fresh install i have problem too after restart pfsense squid and squidguard stops and cant start again (squid-1): The redirector helpers are crashing too rapidly, need help!
my system was squid3 and squidguard-dev amd64 squid non transparent (with wpad)
i hope to solve
second time i did big problems (first when i update to 2.2.2 rebooting time delay so much) and 2.2.3 squid problems
i think it is time to change FW with others

gdsnytech

@mesro09:

i have already this problem but i dont have any raid config
everything was good working until i update from 2.2.2 to 2.2.3 and intennet put so slow now i am finding solution i already tried to reinstall squid and squidguard but nothing is solved now i dont have any filter
i installed new one with fresh install pfsense 2.2.3 but with fresh install i have problem too after restart pfsense squid and squidguard stops and cant start again (squid-1): The redirector helpers are crashing too rapidly, need help!
my system was squid3 and squidguard-dev amd64 squid non transparent (with wpad)
i hope to solve
second time i did big problems (first when i update to 2.2.2 rebooting time delay so much) and 2.2.3 squid problems
i think it is time to change FW with others

Just try the suggestion above and make the change on fstab.

Mr. Jingles

@jimp:

Some have found that the disk changes we made for sync mode have slowed down squid by default.

If you want to risk the possibility of disk corruption but gain speed, edit the ,sync out of /etc/fstab for the root slice and/or run
mount -o nosync /

My squid3 is not fast either. But I don't like risking disk corruption, possibly destroying pfSense. That is: what are the odds disk corruption will appear, Jim? Relevant variables? A thumb number (0,005% or 60%)?

KOM

DNS issues can also make squid look slow. Shell in and run:

squidclient -h LAN_IP_Address -p 3128 mgr:info

Then read the report, paying special attention to the Median Service Times section. Look for anything that seems large as compared to the others.

Mr. Jingles

@KOM:

DNS issues can also make squid look slow. Shell in and run:

squidclient -h LAN_IP_Address -p 3128 mgr:info

Then read the report, paying special attention to the Median Service Times section. Look for anything that seems large as compared to the others.

I do not want to hijack this thread, so if I have to create a new thread (similar problem), I will, just let me know :-[

[quote]
squidclient -h localhost -p 3128 mgr:info
Sending HTTP request … done.
HTTP/1.1 200 OK
Server: squid
Mime-Version: 1.0
Date: Tue, 07 Jul 2015 15:23:33 GMT
Content-Type: text/plain
Expires: Tue, 07 Jul 2015 15:23:33 GMT
Last-Modified: Tue, 07 Jul 2015 15:23:33 GMT
X-Cache: MISS from squid
X-Cache-Lookup: MISS from squid:3128
Connection: close

Squid Object Cache: Version 3.4.10
Build Info:
Start Time: Tue, 07 Jul 2015 13:39:21 GMT
Current Time: Tue, 07 Jul 2015 15:23:33 GMT
Connection information for squid:
Number of clients accessing cache: 2
Number of HTTP requests received: 1037
Number of ICP messages received: 0
Number of ICP messages sent: 0
Number of queued ICP replies: 0
Number of HTCP messages received: 0
Number of HTCP messages sent: 0
Request failure ratio: 0.00
Average HTTP requests per minute since start: 10.0
Average ICP messages per minute since start: 0.0
Select loop called: 609439 times, 10.259 ms avg
Cache information for squid:
Hits as % of all requests: 5min: 23.7%, 60min: 12.2%
Hits as % of bytes sent: 5min: 37.0%, 60min: 4.2%
Memory hits as % of hit requests: 5min: 0.0%, 60min: 8.9%
Disk hits as % of hit requests: 5min: 0.0%, 60min: 8.9%
Storage Swap size: 6668 KB
Storage Swap capacity: 0.0% used, 100.0% free
Storage Mem size: 4620 KB
Storage Mem capacity: 0.2% used, 99.8% free
Mean Object Size: 12.97 KB
Requests given to unlinkd: 0
Median Service Times (seconds) 5 min 60 min:
HTTP Requests (All): 0.10857 0.32154
Cache Misses: 0.12783 0.37825
Cache Hits: 0.00000 0.07014
Near Hits: 0.00000 0.22004
Not-Modified Replies: 0.05633 0.05633
DNS Lookups: 0.01940 0.02683
ICP Queries: 0.00000 0.00000
Resource usage for squid:
UP Time: 6252.187 seconds
CPU Time: 73.719 seconds
CPU Usage: 1.18%
CPU Usage, 5 minute avg: 0.89%
CPU Usage, 60 minute avg: 1.27%
Maximum Resident Size: 178544 KB
Page faults with physical i/o: 0
Memory accounted for:
Total accounted: 7844 KB
memPoolAlloc calls: 246629
memPoolFree calls: 255812
File descriptor usage for squid:
Maximum number of file descriptors: 58977
Largest file desc currently in use: 51
Number of file desc currently in use: 32
Files queued for open: 0
Available number of file descriptors: 58945
Reserved number of file descriptors: 100
Store Disk files open: 0
Internal Data Structures:
569 StoreEntries
537 StoreEntries with MemObjects
536 Hot Object Cache Items
514 on-disk objects

What would you make of this, KOM?

Thank you :P

KOM

Everything looks normal. I think your problem is disk-related as you suspected.

gdsnytech

@Mr.:

@jimp:
Some have found that the disk changes we made for sync mode have slowed down squid by default.

If you want to risk the possibility of disk corruption but gain speed, edit the ,sync out of /etc/fstab for the root slice and/or run
mount -o nosync /
My squid3 is not fast either. But I don't like risking disk corruption, possibly destroying pfSense. That is: what are the odds disk corruption will appear, Jim? Relevant variables? A thumb number (0,005% or 60%)?

I have made the change in fstab both for work (two sites) and home setup and it is working fine. Just make the change in fstab and then reboot.

mesro09

hello
let me explain you this changes for squid caches but i dont use squid for cache contens my config is 0
so can i make this changes ?¿?

chidgear

Hi!. I'm having this same issue, when the proxy is enabled the webpages takes a lot of time to load and, once loaded it becomes more responsive but, still, is very slow.
I have installed Squid3+SquidGuard Transparent proxy enabled and SSL filtering on. I've disabled squidguard (just to make sure) and the issue keeps there. Then, when I configured the lannet to bypass the proxy, the issue dissapeared so I think I've missed something important with Squid3.
I tried to edit the /etc/fstab from this:

# Device		Mountpoint	FStype	Options		Dump	Pass#
/dev/ufsid/558c431cbd7f951e		/		ufs	rw,sync		1	1
/dev/label/swap0		none		swap	sw		0	0

removing the ,sync so the file now reads:

# Device		Mountpoint	FStype	Options		Dump	Pass#
/dev/ufsid/558c431cbd7f951e		/		ufs	rw		1	1
/dev/label/swap0		none		swap	sw		0	0

I ran the command

mount -o nosync /

and restarted the box…
The issue? still there...
Am I doing something wrong?

Thanks in advance

-------Update------------

I got tired so did a full restauration from a file that I've backed up previously. I didn't knew what was causing my trouble, but now it is gone. I suggest the young adventurers that they do, at leas one time at week, a full backup of their configurations so, if they experience some isssue of this kind, have where to "run"... It is easier and faster.

KOM

Did you try my much earlier suggestion of running squidclient and then checking the numbers for outliers?

deajan

This might be a bit of a "basic" answer, but to me squid3 was painfully slow when using c-icap antivirus integration.
The clam process just ate my cpu and the sites took ages to load.

In clam's defense my system runs on a VIA C7 1,5Ghz + 512MB ram… getting too old for all of this.

KOM

squid3 was painfully slow when using c-icap antivirus integration.

Of course the addition of either ClamAV or HAVP is going to cause a lot of overhead and will slow down everything. I've always recommended using a client-based AV instead of having it on the firewall.

aGeekhere

Hmm, When I ran

squidclient -h 192.168.1.1 -p 3128 mgr:info

I got


Sending HTTP request ... done.
HTTP/1.1 403 Forbidden
Server: squid/3.4.10
Mime-Version: 1.0
Date: Sat, 19 Sep 2015 00:23:59 GMT
Content-Type: text/html
Content-Length: 3094
X-Squid-Error: ERR_ACCESS_DENIED 0
Vary: Accept-Language
Content-Language: en
X-Cache: MISS from localhost
X-Cache-Lookup: NONE from localhost:3128
Via: 1.1 localhost (squid/3.4.10)
Connection: close

<title>ERROR: The requested URL could not be retrieved</title>

# ERROR

## The requested URL could not be retrieved

* * *

The following error was encountered while trying to retrieve the URL: [cache_obj                                            ect://192.168.1.1/info](cache_object://192.168.1.1/info)

> **Access Denied.**

Access control configuration prevents your request from being allowed at this time. Please contact your service provider                                             if you feel this is incorrect.

Your cache administrator is [admin@localhost](mailto:admin@localhost?subject=CacheErrorInfo%20-%20ERR_ACCESS_DENIED&body=Cache                                            Host%3A%20localhost%0D%0AErrPage%3A%20ERR_ACCESS_DENIED%0D%0AErr%3A%20%5Bnone%5D%0D%0ATimeStamp%3A%20Sat,%2019%20Sep%202015%                                            2000%3A23%3A59%20GMT%0D%0A%0D%0AClientIP%3A%20192.168.1.1%0D%0A%0D%0AHTTP%20Request%3A%0D%0AGET%20%2Finfo%20HTTP%2F1.0%0AHos                                            t%3A%20192.168.1.1%0D%0AUser-Agent%3A%20squidclient%2F3.4.10%0D%0AAccept%3A%20*%2F*%0D%0AConnection%3A%20close%0D%0A%0D%0A%0                                            D%0A).

* * *

Generated Sat, 19 Sep 2015 00:23:59 GMT by localhost (squid/3.4.10)

birarda

I setup squid today and I believe I am experiencing this issue as well. I'll try that fstab thing. I did notice that using "links" in shell on pfSense seemed to have the same slow download speed that I have when going through squid, in case that helps any.

KOM

aGeekHere, are you sure you got it right? You get that HTML spew when there is an error.

aGeekhere

aGeekHere, are you sure you got it right? You get that HTML spew when there is an error.

Oh no, Well I ssh in and ran

squidclient -h 192.168.1.1 -p 3128 mgr:info

In the root folder.

Ok trouble shooting time, where do I start?

KOM

On Squid's config page, look for External cache-managers and set it to 127.0.0.1, 192.168.1.1. Save and try again.

aGeekhere

When I add 127.0.0.1;192.168.1.1 to External cache-managers I now get.

Sending HTTP request ... done.
HTTP/1.1 403 Forbidden
Expires: Thu, 24 Sep 2015 02:14:08 GMT
Cache-Control: max-age=180000
Content-Type: text/html
Date: Tue, 22 Sep 2015 00:14:08 GMT
Server: lighttpd/1.4.35
X-Cache: MISS from localhost
X-Cache-Lookup: MISS from localhost:3128
Via: 1.1 localhost (squid/3.4.10)
Connection: close

### Request denied by pfSense proxy: 403 Forbidden

 **Reason:** 

* * *

 **Client address:** 192.168.1.1 

 **Client name:** pfsense.mydomain.local 

 **Client group:** default 

 **Target group:** in-addr 

 **URL:** cache_object://192.168.1.1/info192.168.1.1/pfsense.mydomain.local-GET 

* * *

KOM

Weird. Check your System logs and squid logs. I haven't seen that error before.