PfBlockerNG

badger

hi,

outstanding work. Just stumbled about a little problem. I'm using pfblockerNG in combination with CARP. Settings should be synced to configured backup server - which i'm not sure they really get. I can clearly find the rules pfblocker added on the WAN-tab - but on the secondary firewall i can neither find selected entries in the individual tabs nor do filter list under "IPv4"-tab get synced.

Am I doing something wrong - or must sees settings be performed additionally on the backup firewall?

Thank you very much =)

taryezveb

BBcan177,

Was finally able to do what you suggested. Got rid of those IBlock
lists, did not bother to see which list was causing the no internet
issue on reboot. Using your pfBlockerNG_import.php script, posted
here[0] by doktornotor and following superweasel's instructions[1]. No
more reboot issues.

For those that are going to use the pfBlockerNG_import.php script. There
are a few things you still need to do, after following superweasel's
instructions:

Firewall => pfBlockerNG => IPv4 tab

Edit each Alias/List Configuration to:

Enable the lists you want to use. Ie. 'State' to 'ON'.

And 'List Action' as needed.

Do not forget to 'Save' your changes. And also Force an Update and
Reload]; in:

Firewall => pfBlockerNG => Update tab

Once all that is done, will still need to adjust the feeds as they
change from time to time. Take a look at the error.log log file:

Firewall => pfBlockerNG => Logs tab

And this post[2] from BBcan177 for some hints. When done repeat the
Force [Update, Reload].

Is pfBlockerNG_import.php hosted somewhere and kept up to date? A search
did not bring up anything.

Would like to Thank all for the information in this thread. Specifically
for the information above, BBcan177, doktornotor and superweasel.
Especially BBcan177, without whom this would not be possible.

Thank You

pfcode

@taryezveb:

Is pfBlockerNG_import.php hosted somewhere and kept up to date? A search
did not bring up anything.

Its one time use. you may delete it after you were done.

BBcan177

@taryezveb:

Was finally able to do what you suggested. Got rid of those IBlock lists ….. No more reboot issues.

IBlock again! Would have been nice to see which list was causing the issue… Some other poor sucker is going to get hit with that at some point... :)

Is pfBlockerNG_import.php hosted somewhere and kept up to date? A search did not bring up anything.

I am contemplating adding a feature to allow auto updating the Lists/Feeds for a future release. I am finalizing v2.0 which has DNSBL domain name blocking via Unbound Resolver and hope to get that released soon…

Especially BBcan177, without whom this would not be possible.

Thank You!

foetus

@BBcan177:

@taryezveb:

Was finally able to do what you suggested. Got rid of those IBlock lists ….. No more reboot issues.

IBlock again! Would have been nice to see which list was causing the issue… Some other poor sucker is going to get hit with that at some point... :)

I remember a long time ago I managed to break several boxes that way during the beta period, with a certain list :).

I must say pfblockerng is still my favorite package. Maintained and pretty much bug free. Now I should finally start testing the DNSBL..

serialdie

@cauthier:

Problem solved by BBcan177 with a minor edit to the following file:

/usr/local/www/pfblockerng/pfblockerng.php

Line 192

if (file_exists($local_file)) {
// Determine if URL is Remote or Local
if ($host['host'] == "127.0.0.1" || $host['host'] == $pfb['iplocal'] || empty($host['host'])) {
$remote_tds = gmdate ("D, d M Y H:i:s T", filemtime($local_file));
} else {

Original:
$remote_tds = gmdate ("D, d M Y H:i:s T", filemtime($local_file));

NEW:
$remote_tds = gmdate ("D, d M Y H:i:s T", filemtime($list_url));

Thanks!

To be very clear, change the variable $local_file to $list_url

I apply this and after each update the IP count resets to 0 and I have to Force Reload to regain my IP list.
Once I regain my IP list I can see my updates.

Any ideas?

BBcan177

@serialdie:

I apply this and after each update the IP count resets to 0 and I have to Force Reload to regain my IP list. Once I regain my IP list I can see my updates.

Hi serialdie,

How many pfBNG Aliases did you configure? I think you hit another bug that I haven't merged into the release… If you only have one, create a second Alias and use a list like Spamhaus drop. I think creating a second alias will fix this issue for you... (2 bugs for you in one day :) )

https://www.spamhaus.org/drop/drop.txt

serialdie

@BBcan177:

@serialdie:

I apply this and after each update the IP count resets to 0 and I have to Force Reload to regain my IP list. Once I regain my IP list I can see my updates.

Hi serialdie,

How many pfBNG Aliases did you configure? I think you hit another bug that I haven't merged into the release… If you only have one, create a second Alias and use a list like Spamhaus drop. I think creating a second alias will fix this issue for you... (2 bugs for you in one day :) )

https://www.spamhaus.org/drop/drop.txt

HAHAHA! I get a cookie? :P
Yes I do have one list setup only so looks like you nailed it with this one.
I will try that and report back.

Thanks!

cyberbot

I have asked this before but didn't get a answer
is there is a possibility to use PFblockerNG to block porns like proxy server ?

f34rinc

@cyberbot:

is there is a possibility to use PFblockerNG to block porns like proxy server ?

Once pfBlockerNG 2.0 is ready it will have DNSBL available which could be used to block porn. Ive had good success using the DansGuardian formatted lists from http://www.squidblacklist.org

![2015-08-30 18_19_25.png](/public/imported_attachments/1/2015-08-30 18_19_25.png)
![2015-08-30 18_19_25.png_thumb](/public/imported_attachments/1/2015-08-30 18_19_25.png_thumb)

BBcan177

pfBlockerNG v1.10 - Pull Request has been posted -

Changelog:
https://github.com/pfsense/pfsense-packages/pull/1033

taryezveb

@BBcan177:

IBlock again! Would have been nice to see which list was causing the issue… Some other poor sucker is going to get hit with that at some point... :)

Unfortunately did not have the time to test, sorry.

@BBcan177:

I am contemplating adding a feature to allow auto updating the Lists/Feeds for a future release. I am finalizing v2.0 which has DNSBL domain name blocking via Unbound Resolver and hope to get that released soon…

Looking forward to try this.

Thank You

tonymorella

@BBcan177:

@tonymorella:

It seems logical to have detail allow rules followed by pfBlockerNG block rules before allowing destination ANY rules, did I miss an option to have it work in this order?

If I am reading your request correctly, you are asking to sort the pfSense (Permit/Match) rules to be placed before and after the pfBNG rules… I would think it would be rather cumbersome and not sure if others would use it? For more complex setups, that is where the "Alias" type Rules are better utilized. If I have read this incorrectly, please let me know.

Yes, you are reading this correctly. Figured out how to get floating rules working the way I needed then changed settings to pfBlockerNG block > pfSence Allow and it fixed my set .

Thanks

tonymorella

Just a quick FYI if anyone needs to know how to pull IP lists from BGP ASN. One option is to use bgp.he.net and create an Alias match rules under IPv4 or IPv6


http://bgp.he.net/search?search%5Bsearch%5D=facebook&com

Another option is a script, ugly I know :)


whois -h whois.radb.net -- -i origin -T route AS$(whois -h v4.whois.cymru.com " -v $(host www.facebook.com | grep "has address" | awk '{print $4}')" | grep -v AS | awk '{print $1}') | grep route: | awk '{print $2}'

It gets the IP for the host, finds the ASN then looks up the routes for the ASN, can pipe it to a text file and create and Alias from it.

Say you want to find all the hosts for a domain that does not have an ASN. Still trying to figure this one out, it's a quick start:

nmap -R -sL 64.98.161.0/24 | grep ting.com

Is there any way of doing this in pfBlockerNG?

Thanks
Tony

musicwizard

@tonymorella:

Just a quick FYI if anyone needs to know how to pull IP lists from BGP ASN. One option is to use bgp.he.net and create an Alias match rules under IPv4 or IPv6
http://bgp.he.net/search?search%5Bsearch%5D=facebook&com
Another option is a script, ugly I know :)
whois -h whois.radb.net -- -i origin -T route AS$(whois -h v4.whois.cymru.com " -v $(host www.facebook.com | grep "has address" | awk '{print $4}')" | grep -v AS | awk '{print $1}') | grep route: | awk '{print $2}'
It gets the IP for the host, finds the ASN then looks up the routes for the ASN, can pipe it to a text file and create and Alias from it.

Say you want to find all the hosts for a domain that does not have an ASN. Still trying to figure this one out, it's a quick start:
nmap -R -sL 64.98.161.0/24 | grep ting.com
Is there any way of doing this in pfBlockerNG?

Thanks
Tony

Pfblockerng 2.0 will have dnsbl so you can just add www.facebook.com and facebook.com to a list. Or you can block those domains via dns resolver if its only a few.

BBcan177

@BBcan177:

pfBlockerNG v1.10 - Pull Request has been posted -

Changelog:
https://github.com/pfsense/pfsense-packages/pull/1033
**Pull request has been merged. Following this update, please execute a "Force Reload".

Thanks!**

pfcode

a small bug: After a pfBlockerNG upgrade, All the rules prior to original pfBlokerNG rules were put at the bottom in the floating rules page. I have to move them to the top.

tonymorella

@Music:

@tonymorella:
Just a quick FYI if anyone needs to know how to pull IP lists from BGP ASN. One option is to use bgp.he.net and create an Alias match rules under IPv4 or IPv6
http://bgp.he.net/search?search%5Bsearch%5D=facebook&com
Another option is a script, ugly I know :)
whois -h whois.radb.net -- -i origin -T route AS$(whois -h v4.whois.cymru.com " -v $(host www.facebook.com | grep "has address" | awk '{print $4}')" | grep -v AS | awk '{print $1}') | grep route: | awk '{print $2}'
It gets the IP for the host, finds the ASN then looks up the routes for the ASN, can pipe it to a text file and create and Alias from it.

Say you want to find all the hosts for a domain that does not have an ASN. Still trying to figure this one out, it's a quick start:
nmap -R -sL 64.98.161.0/24 | grep ting.com
Is there any way of doing this in pfBlockerNG?

Thanks
Tony
Pfblockerng 2.0 will have dnsbl so you can just add www.facebook.com and facebook.com to a list. Or you can block those domains via dns resolver if its only a few.

Not trying to block, want to allow any host for a domain :) I have been beta testing 2.0, at the moment have not seen any way to do via the GUI
Thanks
Tony

BBcan177

If you are trying to suppress a domain, you can click the "+" icon in the Alerts Tab which will remove the domain instantly and not allow that domain to be added again. ‎ You can also add a domain to the "DNSBL" suppression list box but that will only take effect when the feeds are downloaded again or on a "Force Reload".

tonymorella

@tonymorella:

@Music:
@tonymorella:
Just a quick FYI if anyone needs to know how to pull IP lists from BGP ASN. One option is to use bgp.he.net and create an Alias match rules under IPv4 or IPv6
http://bgp.he.net/search?search%5Bsearch%5D=facebook&com
Another option is a script, ugly I know :)
whois -h whois.radb.net -- -i origin -T route AS$(whois -h v4.whois.cymru.com " -v $(host www.facebook.com | grep "has address" | awk '{print $4}')" | grep -v AS | awk '{print $1}') | grep route: | awk '{print $2}'
It gets the IP for the host, finds the ASN then looks up the routes for the ASN, can pipe it to a text file and create and Alias from it.

Say you want to find all the hosts for a domain that does not have an ASN. Still trying to figure this one out, it's a quick start:
nmap -R -sL 64.98.161.0/24 | grep ting.com
Is there any way of doing this in pfBlockerNG?

Thanks
Tony
Pfblockerng 2.0 will have dnsbl so you can just add www.facebook.com and facebook.com to a list. Or you can block those domains via dns resolver if its only a few.
Not trying to block, want to allow any host for a domain :) I have been beta testing 2.0, at the moment have not seen any way to do via the GUI
Thanks
Tony

I found what I was looking for :) https://hackertarget.com/find-dns-host-records/ using the api can create a list of all the hosts for a domain and get a formated lists!

http://api.hackertarget.com/hostsearch/?q=ting.com

Found two more useful tools for dns enumeration:

https://github.com/TheRook/subbrute
https://github.com/darkoperator/dnsrecon