URGENT HELP libvirt kvm
-
"Secondly LAN subnet is directly connected to pfsense it will never show you in packet capture applied NAT rules. If you sniff traffic on WAN interface and it will be inbound connection then you should see PUBLIC ip's."
What??
I assume its wan is 198.50.221.177, pretty sure in fact that is your pfsense since when I hit it I get pfsense login! That you have webgui allowed on your wan is just another F'd up thing with this setup that is for sure
why don't you PM me a login and I will take a look directly to what is going on.. What kind of BS setup do you have that devices on the lan side of pfsense would not be natted through pfsense wan?? I can tell you for sure yes you would see natted traffic on the wan and on the lan you would see the non natted traffic. So as you can see here is me pinging you on the lan interface of pfsense where it shows my private address, and there it is going out the wan with my public IP. And you can also see pfsense pinging its gateway every 1 second as it does with default apinger running.
-
Not sure why it working from WAN, I don't see any rules which will allow the access.
-
Look like firewall is not running. Logs are from Sat 5 midnight. That why you can access it.
-
Check screenshot from PFSense where on tcpdump I am capture traffic on BRIDGE0. Server on LAN is send ping, but nothing coming back. look like firewall not running or something like that.
-
show the same capture but on pfsense WAN (not bridge0)
-
BRIDGE0 is the WAN
-
In first my post I have small schema design.
-
ok, just read the thread again. Your setup looks messed up.
no other suggestion apart from restore from backup. :-) -
I think it some thing to do with firewall. Logs in web UI is not writing still from midnight Sep 5.
-
well its not pinging now.
-
I shutdown old unit. And in progress of rebuild to new unit. Left restore firewall rules. Because I need return site online.
So far everything works interfaces same setup as before all the same. And don't have idea what happened, I suspect that some thing happened with firewall, because I tried restore form backup.I am still not back online 100% but,
I want tell Everyone here HUGE THANK YOU FOR SUPPORT.
-
so now do your ping test with 8.8.8.8 on wan.. Does it show you public or private – there just is no freaking way it could work with private IP and no nat.
-
OK I was be able restore firewall and all settings. Site back online 100%. I still be live that on old vm, firewall is broken. On new vm same setup, everything work right now 100%.
Here o new vm when NAT and firewall works. On old one I so on WAN (BRIDGE0) interface private IP which mean something happened with firewall.
Again huge THANK you for help.
17:07:25.409679 IP 198.50.221.189 > 8.8.8.8: ICMP echo request, id 8256, seq 1, length 64 17:07:25.432903 IP 8.8.8.8 > 198.50.221.189 ICMP echo reply, id 8256, seq 1, length 64 -
there you go so now you have a different wan IP.. but yes that makes sense.. Not what you were seeing before where you seeing on the wan 10.x as source address.
