OpenVPN on dual WAN - cannot reach clients

[eddi1984]

I hope the pictures help. I dont know howto get the text version of the OpenVPN Server config.

If you can tell me where to find it, I can upload that as well.

[heper]

you don't need to push your tunnel network, you need to push you lan network

[eddi1984]

I removed the push to Tunnel network and added:

push "route 172.24.0.0 255.255.0.0";

But it did not solve my problem.

It seems to me, that the Tunnel is going to localhost, but is stuck there and cannot reach the LAN. I can connect via VPN on both WAN interfaces and access the pfsense box web interface and access the internet, but not the LAN.

[heper]

do the routes show up in the routing tables on the clients ?

[eddi1984]

How can I check that?

[heper]

http://www.howtogeek.com/howto/ubuntu/display-the-routing-table-in-either-windows-or-ubuntu/

[eddi1984]

see picture of routing table.

As far as I can tell, the route does show up properly.


[heper]

yes but you are having a route for 2 subnets ??

a /16 one and a /24 both pointing towards 172.24.0.0 …. why is that ?

[eddi1984]

Hi,

I noticed that as well and removed it already. It was, because of the push entry that was pointing to /16. i changed it to /24. Now it only shows one route to 172.24.0.0 /24.

[eddi1984]

Hi,

anybody have any further ideas? This is still not working, but I cannot find the issue. All settings look fine.