VPNClient couldn't access Clients in LAN + Internet
-
Hi,
i have a problem by setting up a VpnServer with pfsense.
This is the test environment i used:VPN Clients
172.21.180.X/23
|
|
|
GW to Internet–-------------WAN-IP Pfsense------------------LAN-IP Pfsense---------------------Client
172.28.204.2 172.28.204.220 10.20.0.2/24 10.20.0.10
|
|
|
OpenVPN Service
10.20.1.0/24The client in my internal LAN(10.20.0.10) could access internet.
I could also connect to the openvpn service on the pfsense server out of the 172.21.180.0/23 network.
The VPN Client gets the IP-Adress 10.20.1.6 Gateway 10.20.1.5.
My problem is that the VPN Client couldn't reach the Internet or the internal LAN.Here's my OpenVPN Config:
Server Mode: Remote Access (SSL / TLS)
Protocol: UDP
Device Mode: tun
Interface: WAN
Local port: 1194
Tunnel Network: 10.20.1.0/24
Force all client generated traffic through the tunnel
Compress tunnel packets using the LZO algorithm.
Provide a virtual adapter IP address to clientsNat config:
Interface source dest
WAN 10.20.0.0/24 all
OpenVPN 10.20.1.0/24 allFirewall rules
WAN allow UDP 1194
LAN Allow everything when source is LAN
OpenVPN allow everythingWhat do i have to do to access internal LAN and Internet from my VPN-Client?
-
Your OpenVPN server config does not mention what you put for "Local Network" and "Remote Network". On the server, you certainly need to specify "Local Network" - 10.20.0.0/24 - and that will be told to the clients.