Want to block a network to interface groups
-
now will this rule affect the other networks (interfaces) or will it only affect the interface i assigned it to
Rules are applied on traffic entering an interface, so any rule you create will only directly affect that network. For example, if you place a rule on the VLAN10 tab (just making one up), it would affect all traffic coming from clients on the VLAN10 subnet as it enters the pfSense VLAN10 interface. Firewall rules block traffic coming into an interface, not going out of the interface. You have to think of it as traffic goes IN to the pfSense interface from the subnet, traffic flows OUT of the pfSense interface to the subnet.
-
thanks guys for all your help,
i have 4 tabs and they are all my network interfaces, and i have made a interface group called "house" which consists of "staff/servers/old_staff", the clients interface is on its own and seperate network
i attach my screenshot of my clients tab
the last bottom rule where i have set clients net to talk to any port and any destination, am i right in thinking it will only talk to the internet and NOT the other networks interfaces, or do i need to create a rule for that
basically i want it to talk to the internet but NOT to ANY of the other networks
-
Your last rule is allowing everything on CLIENTS to talk everywhere, including your other LANs.
-
Ok how do i go about it then ie to block the client net accessing the house networks
-
More than one way to do it. Rules are processed top-down, first-match. Try:
Block IP4 All from CLIENTS net to OLD_STAFF net
Block IP4 All from CLIENTS net to STAFF net
Block IP4 All from CLIENTS net to SERVERS net
Allow IP4 All from CLIENTS net to * -
Your rules are all hosed.
First you are blocking to this firewall but only TCP so UDP, etc will be passed by the last rule. You probably want any.
Second you are passing DNS but only TCP. You probably want TCP/UDP.
In general, when you make a guest network you:
-
Pass traffic to specific local assets they need like Email and DNS
-
Reject traffic to more general local assets you don't want them to access like LAN, DMZ, and This firewall
-
Pass traffic to any any (the internet)
https://doc.pfsense.org/index.php/Firewall_Rule_Basics
https://doc.pfsense.org/index.php/Firewall_Rule_Troubleshooting
https://doc.pfsense.org/index.php/Firewall_Rule_Processing_Order
-
-
mmm, doesnt work
i can still ping my private network
heres a detail of my network and i attach a screenshot of my rules
interface groups -
allintf - old staff, clients, staff, servers
aliases -
allnet - 172.16.8.0/21, 172.16.24.0/24, 10.10.20.0/23, 172.17.4.0/22
privatenet - 172.16.8.0/21, 172.16.24.0/24, 10.10.20.0/23
my vm as you can see can ping my private network ip, my vm is on the client interface with ip 172.17.6.146
-
Why are you messing around with floating rules? Posting that screenshot tells us nothing. We have no idea what interfaces and directions you applied the rule to, and no idea if quick is enabled.
All of this matters.
Forget about saving time with an interface group and just put the rules on the interfaces where they belong.
After you get it working, look at implementing your management shortcuts.
-
sorted it!!!
i also made clients net part of the PrivateNet
-
Not how I'd do it but glad it's working for you. I think you're putting WAY too much emphasis on doing this on an interface group.
