IOS Client timeout - Tunnelblick working

tka

Hi folks,

strange Problem:

My OpenVPN-Config is working perfectly from my Mac Tunnelblick Client.

But from iOS via OpenVPN Connect Client last thing logged is "connecting".
The Server log shows: openvpn[17500]: xxxx:xxxx:xxxx:xxxx::xx TLS: Initial packet from [AF_INET6]xxxx:xxxx:xxxx:xxxx::xx:50840, sid=97xxx3b 6xxx2e4e. After that: nothing more - even at higher loglevel.

Only "special" about that config: I'm using a portmapper to map IPv4 (internet) to IPv6 (my pfsense box).

Any ideas?

tia
Tim

johnpoz

"I'm using a portmapper to map IPv4 (internet) to IPv6 (my pfsense box)."

huh?? What exactly is that setup?

So On my iphone 5s, using the openvpn client - with my home pfsense, that I have he tunnel setup with /48 ipv6 and /64 segment used for vpn connections.. I can connect via ipv4, since we don't have any ipv6 here in the building wired or wireless. Once I vpn in I get a ipv6 address on my ios device, and can ping ipv6 addresses through that tunnel. Not the fastest.. I did this really quick, prob setting down and get better pings.. But this was seconds after I connected..

iosipv6openvpn.png_thumb

tka

@johnpoz:

"I'm using a portmapper to map IPv4 (internet) to IPv6 (my pfsense box)."

huh?? What exactly is that setup?

My home ISP only provides public IPv6, IPv4 is only behind NAT, so I have to use a portmapper to use my mobile iOS device which only has IPv4.

Strange thing is, the setup works from my Mac but not from my iPhone (either via Wifi nor 3G/LTE).

tka

Anyone?

:(