PfBlockerNG v2.0 w/DNSBL

BBcan177

When DNSBL is running, I have looked at the Alerts to find site is working, but not able to see the images. How do I find what is blocking the site images

http://kregjig.ning.com/

Click F12 in the browser and goto "console" it will show the domains that are blocked… Its also visible in the Alerts tab. You can also suppress a domain by clicking the "+" icon in the Alerts Tab.

chain

@BBcan177:

@chain:

When DNSBL is running, I have looked at the Alerts to find site is working, but not able to see the images. How do I find what is blocking the site images

http://kregjig.ning.com/

Click F12 in the browser and goto "console" it will show the domains that are blocked… Its also visible in the Alerts tab. You can also suppress a domain by clicking the "+" icon in the Alerts Tab.

OK, that's perfect I'll try to getting it working

chain

I'm running DNSBL_DNSBLEasyList and have selected all the categories. I notice that I don't get any hit on these categories. is there a way to test if this is working correctly?

BBcan177

@chain:

I'm running DNSBL_DNSBLEasyList and have selected all the categories. I notice that I don't get any hit on these categories. is there a way to test if this is working correctly?

Since DNSBL uses deduplication and as Easylists are the last to download, the most popular ADvert servers are being blocked by other Feeds… You can view the Easylist Domain list in the pfBNG Log tab and try to browse to any of those as a test.

shull

Please excuse the noob question, but how do you enable EasyLists? Specifically, what do you put in the Header field? Thanks!

pfSenseHeader.JPG_thumb

BBcan177

The header is just a label for the feed… So it needs to be unique...

ie:

EasyList
EasyPrivacy

chain

here is additional list that can be add to DNSBL

http://www.securemecca.com/Downloads/hosts.txt

todolist

Thanks for pfBlockerNG. I make heavy use of it! I have recently enabled DNSBL and am having a strange issue: When I try to access the pfSense web GUI via hostname, I am redirected to the DNSBL VIP (10.10.10.1). When I "dig firewall.domain" the pfSense box (DNS server) returns the VIP first, and then the proper IP: 10.100.0.1.

I have Unbound set to disable forwarding and enable DHCP registrations and I have a host override for "firewall.domain" pointing to it's proper IP 10.100.0.1. DNSBL "Alerts" tab shows the following:

IF: Unknown
Source: Unknown
Domain/Referer|URI|Agent: firewall.domain Not available for HTTPS alerts
List: no match

Am I missing something in the Unbound configuration? Or is it a DNSBL setting I'm missing? All other local hosts are resolving without issue, it's just pfSense itself that exhibits this behavior.

BBcan177

@todolist:

When I try to access the pfSense web GUI via hostname, I am redirected to the DNSBL VIP (10.10.10.1). When I "dig firewall.domain" the pfSense box (DNS server) returns the VIP first, and then the proper IP: 10.100.0.1.

I have Unbound set to disable forwarding and enable DHCP registrations and I have a host override for "firewall.domain" pointing to it's proper IP 10.100.0.1. DNSBL "Alerts" tab shows the following:

IF: Unknown
Source: Unknown
Domain/Referer|URI|Agent: firewall.domain Not available for HTTPS alerts
List: no match

Am I missing something in the Unbound configuration? Or is it a DNSBL setting I'm missing? All other local hosts are resolving without issue, it's just pfSense itself that exhibits this behavior.

Check your NAT and DNS Host overrides… Don't add anything manually that points to the DNSBL VIP, as that is done by the pkg automatically... Also there are some issues with the Unbound DHCP reg checkboxes... Most leave those disabled...

If you still having issues, maybe try to post in the DNS/NAT forum sections, to see if others can offer any other advice.

todolist

Thanks BBcan177! What would cause the "IF" and "Source" alerts to be "Unknown" and the "List" entry to read "no match"? Is there a debug option I can enable? I've looked through the pfBlockerNG logs tab but maybe I missed a "verbose" option?

BBcan177

Unfortunately for HTTPS requests, the IF/SRC information is not available to log… If you want to see more information run a tcpdump or wireshark... There is some help text in the DNSBL tab...

todolist

@BBcan177:

Unfortunately for HTTPS requests, the IF/SRC information is not available to log… If you want to see more information run a tcpdump or wireshark... There is some help text in the DNSBL tab...

Understood. Thanks again for this package!

DLFerguRD

Thanks for your hard work BBcan177 DNSBL in now working on pfsense 2.3 :)

cwilkinson

Hello,

I have just installed this package on a fresh install of pfSense 2.2.6, NanoBSD 4GB.

I followed your basic instructions and everything works, but after a reboot of the box the DNS Resolver Service fails to start with DNSBL enabled.

I do not have the log info at the moment, but I remember it was looking for a config file on /var that was no longer there.

Please Advise,

Thanks

hda

Services-DNS Resolver Advanced: delete config entry (that file has been lost). Save. Start Resolver.
pfBlockerNG-Update: Force Update.

cwilkinson

I already know how to fix it like that but that requires manual intervention, after a reboot that's not very useful.

cipherson

Hey Guys,

The latest version of pfsense/pfBlockerNG seems to have issues with the "ET IQRisk" list

I just updated my pfsense to the latest 2.2.6-RELEASE built on Mon Dec 21.

I noticed in the pfBlockerNG that my Alias for IQRisk only have an IP count of 1.

I review all the settings and they seemed to be messed up. Following the steps on the Repuation tab it says:
"Select the ET IQRisk' format. The URL should use the .gz File Type. Enter your "ETPRO" code in URL. Further information can be found @ ET IQRisk IP Reputation"
This format type is not longer listed and the help URL is no longer valid.

Any thoughts on how to fix this? Did they remove support for this list?

Also posted via reddit on /r/PFSENSE

https://www.reddit.com/r/PFSENSE/comments/428ehb/latest_pfblockerng_et_iqrisk_format_missing/

cipherson

**Update

After some messing around an point this to the file after stripping out the IPs it still has issues.

[ mine ] Downloading update .. 200 OK. completed .. Empty file, Adding '1.1.1.1' to avoid download failure.

maybe the file is has to much data and the download is timing out? leaving the file empty and failing to add any IPs.

BBcan177

Hi cipherson,

Emerging Threats was bought out by Proofpoint last year. I had a developer subscription to this list, but since it was bought out by Proofpoint, they didn't renew it, so if they made any changes, I am unable to help support any changes.

The previous URL used to be as follows (Changing the X's to your Proofpoint subscription id):
https://rules.emergingthreatspro.com/XXXXXXXXXXXXXXXX/reputation/iprepdata.txt.gz

If you enter that URL in the browser, does the file download? I would assume that the URL would have changed also.

If the URL is ok, post some screenshots of the Reputation tab (ET IQRISK) and obfuscate your Subscription ID…

cipherson

Hey BBcan177

I can download the file fine by hand and the URL structure is the same.

The file format still also looks the same:

ip, category, score

I also downloaded the file, pulled out only the IP addresses and re-served the file on a local webserver just as an IP list and it has the same download issues.

During the update it hangs on the download of this large file (6.9 MB) for about 90 seconds with the following: