Ipv6 static mapping deletes settings
-
Out of dhcpv6 what, server, client?
-
page reloads with Enable DHCPv6 server on interface LAN unticked
and range blanked out
-
No clue what you're referring to. This on services_dhcpv6.php? There are no static route fields there.
-
firewalladdress/services_dhcpv6.php?if=lan
 -
Oh, static mappings. Hm, can't replicate that even adding exactly what you show there. Is it only when you add a new entry there, or also if you edit one?
-
it happened when adding new haven't tried editing but was repeatable go to firewalladdress/status_dhcpv6_leases.php one of the plus's next to a mac you want to add as a static mapping (i was leaving ipv6 blank) add it all apears fine till you apply it then blanks out and disables with out any errors
hopefully that is more clear frequently get introuble for to short of answers
-
was anything else needed to reproduce this issue?
-
I had raised this very issue last week.
https://forum.pfsense.org/index.php?topic=106476.msg593734#msg593734
No one responded. Maybe since the post topic was on DNS.
-
yes still a problem
-
I couldn't replicate anything noted here. Saw Asterix's post last week and thought maybe adding from the lease status page would be the ticket, but that didn't break for me either. Anyone know what it is that makes it replicable? What does the diff in the config history show when doing so, is it actually unsetting those conf settings or is it just the GUI not displaying what's in the config?
-
services_dhcpv6.php made unknown change Current configuration
2/17/16 19:14:40 14.4 157 KiB grandrivers@2001:470:1f11:f4c:ffff:ffff:fffe:74f8: /services_dhcpv6_edit.php made unknown change -
browsed away to dash board and back its definitely unset
-
What's the actual diff between the config revisions show?
Just tried again adding a static mapping from the leases screen, and it works fine. services_dhcpv6_edit.php doesn't unset anything. Only way I see where it could blank out the config is if it didn't pass is_array check towards the top of that file, but not seeing any way that's possible where it's enabled.
-
if i pm you my config would it help ?
-
It might. I'd really just like the diff between the config revisions to see exactly what changed upon adding the new entry, that'd be most helpful.
-
– /conf/backup/config-1455747016.xml 2016-02-17 17:10:24.883655000 -0500
+++ /conf/backup/config-1455743825.xml 2016-02-17 17:10:16.672696000 -0500
@@ -2932,8 +2932,8 @@<revision>- <time>1455747016</time>
- <time>1455743825</time>
<username>grandrivers@2001:470:1f11:f4c:e722:ea61:fd24:e0bb</username></revision>
<openvpn>@@ -3011,14 +3011,6 @@
<rasamednsasdhcp6><radnsserver>2001:470:1f11:f4c::1</radnsserver>
<enable>- <staticmap>- <duid>00:01:00:01:17:82:76:9f:c8:9c:dc:aa:c4:62</duid>- <ipaddrv6>2001:470:1f11:f4c:846c:9ed:1dbe:c3d8</ipaddrv6>
- <hostname>Austin-pc6</hostname>
- <descr>-<filename></filename>
-<rootpath></rootpath>
-</descr></staticmap>
<opt2><ramode>disabled</ramode></opt2></enable></rasamednsasdhcp6></openvpn>
-
this is more current
– /conf/backup/config-1455781101.xml 2016-02-18 21:08:58.099835000 -0500
+++ /conf/config.xml 2016-02-18 21:09:00.846378000 -0500
@@ -2933,9 +2933,9 @@<revision>- <time>1455781101</time>
- <username>(system)</username>
- <time>1455847740</time>
- <username>grandrivers@2001:470:1f11:f4c:ffff:ffff:fffe:74f8</username></revision>
<openvpn><dnshaper>@@ -2979,36 +2979,36 @@
<dhcpdv6><lan><range>- <from>2001:470:1f11:f4c::2</from>
- <to>2001:470:1f11:f4c:ffff:ffff:ffff:0000</to>
+</range>
<prefixrange>- <from>- <to>- <prefixlength>48</prefixlength>
+
+
+<prefixlength></prefixlength></to></from></prefixrange>- <defaultleasetime>- <maxleasetime>- <netmask>+<defaultleasetime></defaultleasetime>
+<maxleasetime></maxleasetime>
+<netmask></netmask>
<failover_peerip>- <domain>- <domainsearchlist>- <ddnsdomain>- <tftp>- <ldap>+<domain></domain>
+<domainsearchlist></domainsearchlist>
+<ddnsdomain></ddnsdomain>
+<ldap></ldap>
<nextserver><filename><rootpath>- <dhcpv6leaseinlocaltime>+<dhcpv6leaseinlocaltime></dhcpv6leaseinlocaltime>
<numberoptions><ramode>managed</ramode>
<rapriority>high</rapriority>
<rainterface><radomainsearchlist>- <bootfile_url>- <ddnsdomainprimary>- <ddnsdomainkeyname>- <ddnsdomainkey>+
+<ddnsdomainprimary></ddnsdomainprimary>
+<ddnsdomainkeyname></ddnsdomainkeyname>
+<ddnsdomainkey></ddnsdomainkey>
<rasamednsasdhcp6><radnsserver>2001:470:1f11:f4c::1</radnsserver>
<staticmap>@@ -3019,8 +3019,7 @@
<filename><rootpath></rootpath></filename></staticmap>- <ddnsclientupdates>allow</ddnsclientupdates>
- <enable>+<ddnsclientupdates></ddnsclientupdates></enable></rasamednsasdhcp6></ddnsdomainkey></ddnsdomainkeyname></ddnsdomainprimary></bootfile_url></radomainsearchlist></rainterface></numberoptions></dhcpv6leaseinlocaltime></rootpath></filename></nextserver></ldap></tftp></ddnsdomain></domainsearchlist></domain></failover_peerip></netmask></maxleasetime></defaultleasetime></lan>
<opt2><ramode>disabled</ramode></opt2></dhcpdv6></dnshaper></openvpn>
-
Does that loss happen on save, or on apply?
We had a similar case happen somewhere else (dns forwarder maybe?) where the apply button was causing a loss due to how it was submitted.
-
on hitting apply
-
OK, that really sounds like what was happening here: https://redmine.pfsense.org/issues/5488 – though that was the DNS Forwarder settings. A similar fix may be necessary on this page. May as well open a ticket on redmine for that, referencing the older ticket.
