Squid, SquidGuard, Lightsquid status on 2.3

UltramaticOrange

Reading threads from older versions of pfSense, it sounds like this is a known issue, but I wanted to report that I am also having issues with the transparent proxy and getting "ERR_EMPTY_RESPONSE" on Chrome. However, my observation has been that everything works fine when the DNS response is still hanging around from the last time I visited the page (read: squid was off). To me, this might suggest that Squid is either having a hard time talking to the dns server (isn't pointed a the local machine/general DNS settings), squid isn't giving dns enough time to respond (timeout setting too short), or there's some conflicting setting between squid and dns.

cmb

There's a workaround for the transparent proxy issue in https://redmine.pfsense.org/issues/5869

chgrp squid /dev/pf

Proper fix to come.

brianc69

Work around confirmed working on my end! Squidguard also functioning now that squid is responding. Thank you!!!

Now I await the return of Lightsquid for reporting but for now the important part of content filtering has returned!

brianc69

Also pleased to report that enabling antivirus is working too! I attempted to download the eicar.txt file and it was blocked with a virus warning as it should be!

Only thing left I notice is on the realtime log page.

Message
WARNING: Clamd was NOT notified: Can't connect to clamd through /var/run/clamav/clamd.sock: No such file or directory
Database updated (6435493 signatures) from db.us.clamav.net (IP: 194.8.197.22)

Everything else looks good to my knowledge.

brianc69

Work around did not survive a reboot. Reapplied and things work again. Just an FYI.

jimp

That's expected, it's just a temp workaround.

jimp

New revision of the squid package is up now for testing. If you did the chgrp work around you need to change it back to 'proxy' or reboot before upgrading the package.

brianc69

Rebooted, updated squid package. Seems to be ok. Content filtering and virus scanning are working.

rubinho

Thx for fixing this issue

Transparentproxy works fine now.

UltramaticOrange

I'm noticing that between the 12-24hr mark, DNS issues return. Timing has seemed relatively inconsistent and I haven't really narrowed down any possible causes just yet.

Here's what I've observed so far:
I restarted unbound, and the issue persisted.
I disabled squid and the issue went away.
I re-enabled squid and everything stayed good.

Next time, I'll check the squid logs and restart the service and report back.

jimp

Update on Lightsquid: The package now runs in its own web server instance using lighttpd, on its own port and with password protection. It was the smoothest way to get perl cgi support without dragging extra dependencies into base.

Note there are some subtle changes to navigation in the package.

brianc69

There is a port issue when you click Lightsquid. I see myip:9000:7445

jimp

@brianc69:

There is a port issue when you click Lightsquid. I see myip:9000:7445

I'll look into that.

maverick_slo

Also nothing happens if I hit refresh buttons.
It seems like it is working but I have no data in the logs.

When I: /usr/local/www/lightsquid/lightparser.pl from console, data appears.
In logs I have: /pkg_edit.php: [lightsquid] Parsing today's entries in access.log using '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'

There has to be something wrong here…

maverick_slo

Oh and one more thing..

If I manually do: /usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today
This is in the crontab.

Output is /usr/bin/perl: Command not found.

jimp

I fixed the perl path (should be /usr/local/bin/perl) and fixed the parsing of the link with the port.

jimp

I split the unrelated hit % posts off into their own thread and cleaned up the references here.

maverick_slo

One more thing:

a) After reboot Lightsquid Web Server wont come up b) Starting it from status_services.php wont start it
c) Saving settings in pkg_edit.php?xml=lightsquid.xml will start it.

:)

jimp

@maverick_slo:

a) After reboot Lightsquid Web Server wont come up b) Starting it from status_services.php wont start it
c) Saving settings in pkg_edit.php?xml=lightsquid.xml will start it.

I can't reproduce this, it starts every time for me. Any errors in the system log, or in /var/log/lighttpd_lightsquid.log ?

whitexp

lightsquid :

disable ssl , now click "open lightsquid" .. url go to "https" ….