No internet access, but webgui works
-
Im using 5.5 with custom drivers for my two realtek gigabit cards, esxi don't officially support them. So I have to use older version.
-
update2 at min I would hope, since you need that for support of 10.1
So if your wired to your AP switch ports.. Do you get dhcp? Do you not see mac in your arp table after you try and ping?? Make no sense that setting static would work then.. Nothing is going to work - unless your still NATTING??
Or is only for the wireless that your having problems?
-
update2 at min I would hope, since you need that for support of 10.1
So if your wired to your AP switch ports.. Do you get dhcp? Do you not see mac in your arp table after you try and ping?? Make no sense that setting static would work then.. Nothing is going to work - unless your still NATTING??
Or is only for the wireless that your having problems?
Only on wireless I get these problems. I tried ipconfig /renew, says can't contact server, and there isn't any info on system logs - dhcp.
![wifi dont work.PNG](/public/imported_attachments/1/wifi dont work.PNG)
![wifi dont work.PNG_thumb](/public/imported_attachments/1/wifi dont work.PNG_thumb)
![wifi manual works.PNG](/public/imported_attachments/1/wifi manual works.PNG)
![wifi manual works.PNG_thumb](/public/imported_attachments/1/wifi manual works.PNG_thumb)
![cable dhcp works.PNG](/public/imported_attachments/1/cable dhcp works.PNG)
![cable dhcp works.PNG_thumb](/public/imported_attachments/1/cable dhcp works.PNG_thumb) -
But wireless works if you setup IP..
And wired works fine to ports on that router work fine.
-
But wireless works if you setup IP..
And wired works fine to ports on that router work fine.
If I setup ip yes, it works, if i plug cable to that access point it work's fine with dhcp. Well this is minor complain.
-
Well since you say it works if you set static and your not seeing discover in log of pfsense clearly its the AP not sending on the discover. You will have to get with makers of that device on issue.
Or if was me, would get a REAL AP… And to be honest a real switch that is smart/managed so you can play with vlans.
-
Just wanted to say, that I upgraded to the latest 2.3 version using the upgrade file. Seems everything working, but RRD graphs button is missing.. What is the link for RRD graphs? 192.168.1.1/rrd_graphs.php Or something like that, thanks!
-
Look in the 2.3 thread..
I really really don't get how someone NEW to networking in general, and pfsense for sure wants to run the lastest beta code that is going to be buggy.. What specific feature in 2.3 is there that you are wanting? Just wait til it releases would be my suggestion to you.
-
Look in the 2.3 thread..
I really really don't get how someone NEW to networking in general, and pfsense for sure wants to run the lastest beta code that is going to be buggy.. What specific feature in 2.3 is there that you are wanting? Just wait til it releases would be my suggestion to you.
This gonna take long time to be updated to RELEASE, so I'm just going fastest way to have beta version, it's design is pretty sleek.
-
yeah because eye candy is what matters in a firewall ;) Its not that far out from release..
Pretty sure it will release before you have a basic grasp of what the difference between tcp and udp is ;) Since your firewall rule causing you all your problems was set for just tcp..
-
Alright :D
This took long time to fix that problem…
Thank you, anyway. You helped me ;)