Want package for squidanalyzer. INSTRUCTIONS AND FILES TO INSTALL

foxnet8

got this working on my virtualbox THANKS your the MAN! ;)

killmasta93

care to share?

Topper727

Well I got it working again. I just copied the files in my tutorial into the /temp/squidanalyzer for the temp.rar (which I had to extract in windows then copy the files over to the directory.

Then the squidanalyzer.rar I copied into /usr/local/www/squidanalyzer

Perl was already version 1.6.2 in my
2.2.6-RELEASE (amd64)
built on Mon Dec 21 14:50:08 CST 2015
FreeBSD firewall.wholesale-florida.com 10.1-RELEASE-p25 FreeBSD 10.1-RELEASE-p25 #0 c39b63e(releng/10.1)-dirty: Mon Dec 21 15:20:13 CST 2015 root@pfs22-amd64-builder:/usr/obj.RELENG_2_2.amd64/usr/pfSensesrc/src.RELENG_2_2/sys/pfSense_SMP.10 amd64

Version

Topper727

Oh I do need the /temp/squidanalyzer folder.. hmm finding which perl will work.

pkg install perl5-5.20.3_8

This seems to put the perl back and not break anything but can't get new data to come in with that

cd /temp/squidanalyzer/ && perl squid-analyzer -r -c /etc/squidanalyzer/squidanalyzer.conf /var/squid/logs/access.log /var/squid/logs/

I did have to put the files in /etc/squidanalyzer this is why some get missing config.

Topper727

ok got it!

this is command that worked

cd /temp/squidanalyzer/ && perl squid-analyzer -d -l /etc/squidanalyzer/squidanalyzer.conf /var/squid/logs/access.log /var/squid/logs/

screencapture-192-168-5-1-squidanalyzer-2016-02-index-html-1455000167666.png

maverick_slo

Hmm if we only had a package :)

Topper727

I know. I will try learn how to make one. I am pretty good at learning this stuff. I did do programming in the past so not too much to learn I think. If I find the right tools. and maybe a video on how

Topper727

Is there no one who knows how to make packages willing to try to make this one?

Topper727

wish I had money for a bounty. Someone has to be interested with the package for this. And have the skills to do.. maybe even someone with money for bounty to find the right person to do it.

killmasta93

its been a while havent tried it until today still no luck :(

First

cd /temp/squidanalyzer/ && perl squid-analyzer -d -l /etc/squidanalyzer/squidanalyzer.conf /var/squid/logs/access.log /var/squid/logs/

The issue with that the route /etc/squidanalyzer/squidanalyzer.conf it was not created or did i miss something?

I would then unzip temp folder on windows and then place it in the / directory (root) of pfSense

then the squidanalyzer.rar unzip it on a windows copy that folder to /usr/local/www/

but had no luck im going to see if next week ill post a bounty

Topper727

I have done some work to make it the newest version 6.5 and works good. I know now why some people have had some issues.. I really hope someone can make package. Let me know if I should zip up and make easy install for people

Presbuteros

Thank you to Topper and Cino for your input here.

After a lot of reading this is what worked for me:

1. Thousands of additional FreeBSD packages can be installed on pfSense as noted here: https://doc.pfsense.org/index.php/Installing_FreeBSD_Packages

2. In the Index of those FreeBSD packages at this link http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/ you will find that SquidAnalyzer is available as "squidanalyzer-6.5.txz"

3. In the shell enter "pkg add http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/squidanalyzer-6.5.txz" (without quotes)

4. You will receive a confirmation of the install. The squidanalyzer.conf file is in usr/local/etc/squidreport/

5. Run the command manually once: cd /usr/local/bin/ && perl squid-analyzer

6. Set this as a cron job to your desire frequency

7. You should be able to access SquidAnalyzer at x.x.x.x/squidreport

It is cleaner to use pkg to install a FreeBSD package than to use WinSCP to copy and paste items from dropbox into your firewall installation. ;)

AR15USR

@Presbuteros:

Thank you to Topper and Cino for your input here.

After a lot of reading this is what worked for me:

1. Thousands of additional FreeBSD packages can be installed on pfSense as noted here: https://doc.pfsense.org/index.php/Installing_FreeBSD_Packages

2. In the Index of those FreeBSD packages at this link http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/ you will find that SquidAnalyzer is available as "squidanalyzer-6.5.txz"

3. In the shell enter "pkg add http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/squidanalyzer-6.5.txz" (without quotes)

4. You will receive a confirmation of the install. The squidanalyzer.conf file is in usr/local/etc/squidreport/

5. Run the command manually once: cd /usr/local/bin/ && perl squid-analyzer

6. Set this as a cron job to your desire frequency

7. You should be able to access SquidAnalyzer at x.x.x.x/squidreport

It is cleaner to use pkg to install a FreeBSD package than to use WinSCP to copy and paste items from dropbox into your firewall installation. ;)

At step 5 I get this error:

[2.3.3-RELEASE][admin@xxxx.lan]/usr/local/bin: cd /usr/local/bin/ && perl squid-analyzer -r -c /var/squid/logs/access.log
ERROR: you must give a valid output directory. See option: Output

Also, the output from the pkg install says:

Message from squidanalyzer-6.5:
-----------------------------------------------------------------------------
1\. Modify your httpd.conf to allow access to HTML output like follow:
        Alias /squidreport /usr/local/www/squidreport
        <directory usr="" local="" www="" squidreport="">Options -Indexes FollowSymLinks MultiViews
            AllowOverride None
            Order deny,allow
            Deny from all
            Allow from 127.0.0.1</directory> 
2\. If necessary, give additional host access to SquidAnalyzer in httpd.conf.
   Restart and ensure that httpd is running.
3\. Browse to http://my.host.dom/squidreport/ to ensure that things are working
   properly.
4\. Setup a cronjob to run squid-analyzer daily:

     # SquidAnalyzer log reporting daily
     0 2 * * * /usr/local/bin/squid-analyzer > /dev/null 2>&1

or run it manually.
For more information, see /usr/local/share/doc/squidanalyzer/README file.

Where is the httpd.conf file located?

doktornotor

There is no httpd.conf anywhere, obviously. Apache is not part of pfSense install.

AR15USR

Well not obvious to a non developer home user like myself, but now I know. Thanks.

I'm a bit out of my league without a walk through on this one, so I will have to hope for a package as well..

If I run "pkg delete squidanalyzer-6.5.txz" will I break anything? (will that even work?)

Presbuteros

@AR15USR:

At step 5 I get this error:

[2.3.3-RELEASE][admin@xxxx.lan]/usr/local/bin: cd /usr/local/bin/ && perl squid-analyzer -r -c /var/squid/logs/access.log
ERROR: you must give a valid output directory. See option: Output

AR15USR no need to uninstall the package, you are almost there. I failed to mention in my install notes that there is no httpd.conf. Instead there is squidanalyzer.conf and it is asking for a valid output directory. This file is located in

/usr/local/etc/squidreport/

You can edit squidanalyzer.conf by navigating to Diagnostics>Edit File>Browse and browse to that location. Or you can paste /usr/local/etc/squidreport/ into the "Path to be edited" bar and choose "Browse." Either way will get to the folder you need to be in to see squidanalyzer.conf

You can find your default Log Store Directory settings under Services>Squid Proxy Server>General. That log file location needs to be entered into the squidanalyzer.conf file. It is likely the default directory /var/squid/logs/access.log See below the section of the .conf file you will need to edit.


# Set the path to the Squid, squidGuard and/or ufdbGuard log files
LogFile	/var/squid/logs/access.log

Once you edit the .conf file, run this command again: cd /usr/local/bin/ && perl squid-analyzer

Then navigate to x.x.x.x/squidreport and enjoy.

Let us know how it goes.

AR15USR

Thanks for the help Presbuteros. I got the squidanalyzer.conf file edited and ran the command. It took a while to finish but it did so with no error.

When I pointed my browser to http://192.168.1.1/squidreport I get "403 Forbidden nginx".

EDIT: It works if I go to http://192.168.1.1/squidreport/2017/
I browsed the /squidreport folder and there is no .html file in there:

/usr/local/www/squidreport
  ..
  2016
  2017
  images
  SquidAnalyzer.current
  flotr2.js
  sorttable.js
  squidanalyzer.css

Presbuteros

AR15USR glad you did not give up. Interesting that that x.x.x.x/squidreport doesn't work but x.x.x.x/squidreport/2017/ does.
Also interesting that an "index.html" file was not created when the command was run.

I have recreated your issue on my install by deleting my index.html in /usr/local/www/squidreport/ However, when I run the command

cd /usr/local/bin/ && perl squid-analyzer

the index.html file is created again and I can access Squidanalyzer at my x.x.x.x/squidreport

Try this:

1. Compare your .conf file to mine


####
# This file is the default configuration file for SquidAnalyzer
# Edit it to match your needs and copy it under /usr/local/etc/squidreport/squidanalyzer.conf
#####

# Path where SquidAnalyzer should dump all HTML and images files.
# Choose a path that can be read by a Web browser
Output	/usr/local/www/squidreport

# The URL of the SquidAnalyzer javascript, HTML and images files.
WebUrl	/squidreport

# Set the path to the Squid, squidGuard and/or ufdbGuard log files
LogFile	/var/squid/logs/access.log

# If you want to use DNS name instead of client Ip address as username enable
# this directive. When you don't have authentication, the username is set to
# the client ip address, this allow you to use the DNS name instead.
# Note that you must have a working DNS resolution and that it can really slow
# down the generation of reports.
UseClientDNSName	0

# If you have enabled UseClientDNSName and have lot of ip addresses that do
# not resolve you may want to increase the DNS lookup timeout. By default
# SquidAnalyzer will stop to lookup a DNS name after 0.0001 second (100 ms).
DNSLookupTimeout	0.0001

# Set the file containing network alias name. Network are
# show as Ip addresses so if you want to display name instead
# create a file with this format :
# LOCATION_NAME	IP_NETWORK_ADDRESS
# Separator must be a tabulation
NetworkAlias	/usr/local/etc/squidreport/network-aliases

# Set the file containing user alias name. If you don't have auth_proxy
# enable user are seen as Ip addresses, or if you want to replace login
# name by full user name, create a file with this format :
# FULL_USERNAME	IP_ADDRESS || LOGIN_NAME
# Separator must be a tabulation
UserAlias	/usr/local/etc/squidreport/user-aliases

# How do we sort Network, User and Url report screen
# Value can be: bytes, hits or duration. Default is bytes.
OrderNetwork	bytes
OrderUser	bytes
OrderUrl	bytes

# How do we sort Mime types report screen
# Value can be: bytes or hits. Default is bytes.
OrderMime	bytes

# Should we display user URL details. This will show all URL read
# by user. Take care to have enougth space disk for large user.
UrlReport	1

# Enable this directive if you don't want the tree Top URL and Domain HTML tables.
# You will just have the table of Url/Domain ordered per hits then you can still
# sort the URL/Domain order by clicking on each column
UrlHitsOnly	0

# Should we display user details. This will show statistics per user.
UserReport	1

# Run in quiet mode or print debug information
QuietMode	1

# Cost of the bandwith per Mb. If you want to generate invoice per Mb
# for bandwith traffic this can help you. Value 0 mean no cost.
CostPrice	0

# Currency of the bandwith cost
Currency	$

# Top number of url to show
TopNumber	300

# Path to the file containing client ip addresses, network ip address,
# and/or auth login to exclude from report
Exclude	/usr/local/etc/squidreport/excluded

# Path to the file containing client ip addresses, network ip address,
# and/or auth login to include into the report. Other entries will be
# excluded by default.
Include	/usr/local/etc/squidreport/included

# Translation Lang	/usr/local/etc/squidreport/lang/en_US.txt,
# en_US.txt, ru_RU.txt, uk_UA.txt, cs_CZ.txt, pl_PL.txt and de_DE.txt).
# Default to:
#Lang	/usr/local/etc/squidreport/lang/en_US.txt

# Date format used to display date (year = %y, month = %m and day = %d)
# You can also use %M to replace month by its 3 letters abbreviation.
DateFormat	%y-%m-%d

# Set this to 1 if you want to anonymize all user login. The username
# will be replaced by an unique id that change at each squid-analyzer
# run. Default disable.
AnonymizeLogin	0

# Adds peer cache hit (CD_SIBLING_HIT) to be taken has local cache hit.
# Enabled by default, you must disabled it if you don't want to report
# peer cache hit onto your stats.
SiblingHit	1

# Set the default unit for transfert size. Default is BYTES, other possible
# values are KB, MB and GB
TransfertUnit	BYTES

# Minimum percentage of data in pie's graphs to not be placed in the others item.
MinPie		2

# Set this to your locale to display generated date in your language. Default
# is to use strftime. If you want date in German for example, set it to de_DE.
# For french, fr_FR should do the work.
#Locale		en_US

# By default SquidAnalyzer is saving current collected statistics each time
# a new hour is found in log file. Most of the time this is enough but if
# you have huge log file and don't have enough memory this will slow down the
# parser by forcing Perl to use temporaries files. Use lower value following
# your memory and the size of your log file, on very huge log file with lot of
# requests/seconde a value of 30 minutes (1800) or less should help.
WriteDelay	3600

# Use this directive to show the top N users that look at an URL or a domain.
# Set it to 0 to disable this feature.
TopUrlUser	20

# This directive allow you to replace the SquidAnalyze logo by your custom
# logo. The default value is defined as follow:
# [
# ![]($self->{WebUrl}images/logo-squidanalyzer.png "SquidAnalyzer $VERSION")
# ]($self->{WebUrl}) SquidAnalyzer
# Feel free to define your own header but take care to not break current design.
#CustomHeader	[![](http://my.isp.dom/logo.png "My ISP link")](http://my.isp.dom/) My ISP Company

# This directive allow exclusion of some unwanted methods in report statistics
# like HEAD, POST, CONNECT, etc. Can be a comma separated list of methods.
#ExcludedMethods	HEAD

# This directive allow exclusion of some unwanted mimetypes in report statistics
# like text/html, text/plain, or more generally text/*, etc. Can be a comma separated
# list of perl regular expression.
#ExcludedMimes	text/.*,image/.*

# This directive allow exclusion of some unwanted codes in report statistics
# like TCP_DENIED/403 which are generated when a user accesses a page the first
# time without authentication. Can be a comma separated list of methods.
#ExcludedCodes	TCP_DENIED/403

# When SquidAnalyzer find a corrupted line in his data file, it exit immedialtly.
# You can force him to wait for a certain amount of errors before exiting. Of
# course you might want to remove the corrupted line before the next run. This
# can be useful if you have special characters in some fields like mime type.
#MaxFormatError	0

# Set timezone to use when SquidAnalyzer is used in a different server than
# the one running squid and there is a different timezone between these two
# machine. The value must follow format: +/-HH. Default is to use local time.
#TimeZone	+01

2. Reboot (if you haven't already tried this)

Keep us updated…

AR15USR

Presbuteros, I ran the command again, no change.

The only difference between our .conf files I can see is:

CostPrice	0.5
Currency	€
TopUrlUser	20

I changed mine to dollar fyi and interestingly it did not change in the squidanaylizer/2017 page. I will reboot and report back

Presbuteros

Ok. If the reboot was no joy, I suggest an uninstall then reinstall? I just did it on my installation and all went well.

1. I uninstalled Squidanalyzer from my install with

pkg remove squidanalyzer

It notified me that,

Checking integrity... done (0 conflicting)
Deinstallation has been requested for the following 1 packages (of 0 packages in the universe):
Installed packages to be REMOVED:
        squidanalyzer-6.5
Number of packages to be removed: 1
Proceed with deinstalling packages? [y/N]: y
[1/1] Deinstalling squidanalyzer-6.5...
You may need to manually remove /usr/local/etc/squidreport/squidanalyzer.conf if it is no longer needed.
[1/1] Deleting files for squidanalyzer-6.5: 100%

2. I used WinSCP to log into my PFSense install and navigated to /usr/local/etc/squidreport/
My "squidanalyzer.conf" file was still there. I deleted it.

3. I reinstalled Squidanalyzer with```
pkg add http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/squidanalyzer-6.5.txz

WinSCP was still open to /usr/local/etc/squidreport/ so I clicked the refresh button which revealed the newly installed files.

**4.** I opened the sqidanalyzer.conf file and made my desired changes.

**5.** I ran```
cd /usr/local/bin/ && perl squid-analyzer

6. I navigated to x.x.x.x/squidreport and all was well.

Good luck.