NEW Monitoring graph

whitexp

see

aaaa.jpg_thumb

jdillard

" they are all SI formatted now." i dont know if I understand and am a sure at this point it looks harder for most (isp's) i like to have proof of poor service

dhcp leases graph is missing will that be worked on at some point

It auto converts to the SI prefixes: http://www.shimadzu.com/an/hplc/support/n9j25k000000y4ah-img/n9j25k000000y8nb.jpg

It is just tricky in this case because there are a lot of different use cases sharing the same graph, it'll get there.

DHCP leases (DHCP category) shows up for me. I assume you have it enabled?

NOYB

Submitted a few more pull requests last night.

Auto update.
Updates the graph 4 times per selected resolution.
Updates the graph on settings change.
https://github.com/pfsense/FreeBSD-ports/pull/77
Collapsible and configurable show/hide settings panel.
Same as status system logs filter and manage log panels.
Replaced the "Update" button with refresh icon on title bar.
I think this would be real nice combined with being able to set a default view. Open the monitor and have your preferred view without the settings panel consuming a third of the display. A cleaner look.
https://github.com/pfsense/FreeBSD-ports/pull/78
Use same units in tooltip as graph on quality.
Code wise a bit of a hack I think and I'm sure Dillard and/or others can do it much more elegantly. But it suffices for me for now. We mere humans just don't relate well to long strings of digits.
https://github.com/pfsense/FreeBSD-ports/pull/79

See attached image of my current incarnation.

MyCurrentIncarnation.jpg_thumb

grandrivers

you are correct its disabled and wont enable ,my bad ill try to chase that down

jdillard

I'm guessing the labels across the bottom are in the next PR ;)

I'll make comments for each of the PRs on github.

heper

@grandrivers:

you are correct its disabled and wont enable ,my bad ill try to chase that down

i just tried to enable the dhcp graphs on a previously disabled interface. they showed right up.

goto https://your_pf_ip/status.php & search for <statsgraph>it should show something like```
<statsgraph>yes</statsgraph>

grandrivers

i goto dhcp server tick Enable RRD statistics graphs hit save page reloads with it unticked

heper

best to start a new thread for that. i've just tried this on 2 systems and enable/disable works as intended.

NOYB

@jdillard:

I'm guessing the labels across the bottom are in the next PR ;)

I'll make comments for each of the PRs on github.

Yup. Future graph meta data PR. Maybe tonight.
Thanks.

whitexp

@jdillard:

@whitexp:

Interactive Graph
Error: SyntaxError: Unexpected token F

Did you just upgrade? Are you on 64 or 32bit? What graphs do you have selected?

In Chrome right click the screen and click Inspect. Then choose the Network tab and refresh the browser. Click the update button on the WebGUI and then you should see a line item with rrd_fetch_json.php at the bottom of the dev tools window. If you click that then choose the response tab within it you should see what the server responded with. Are there any errors in there?

Crash report begins. Anonymous machine information:

amd64
10.3-RC1
FreeBSD 10.3-RC1 #446 22a5a00(RELENG_2_3): Thu Mar 10 07:19:29 CST 2016 root@pfs23-amd64-builder:/usr/home/pfsense/pfsense/tmp/obj/usr/home/pfsense/pfsense/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
[10-Mar-2016 15:07:02 America/Sao_Paulo] PHP Fatal error: Call to undefined function rrd_fetch() in /usr/local/www/rrd_fetch_json.php on line 125
[10-Mar-2016 15:14:08 America/Sao_Paulo] PHP Fatal error: Call to undefined function rrd_fetch() in /usr/local/www/rrd_fetch_json.php on line 125
[10-Mar-2016 16:45:11 America/Sao_Paulo] PHP Fatal error: Call to undefined function rrd_fetch() in /usr/local/www/rrd_fetch_json.php on line 125

NOYB

You know what would be really slick? User programed quick link graph buttons.

See attached image.

UserProgramedQuickLinkGraphButtons.jpg_thumb

samoth

I'm still not seeing any data in my graphs. Everything shows at zero.

Is there a setting I'm missing?

Thanks,
Tom

biggsy

The label on the Y axis should be "time/%", rather than "seconds/%" so that the values are consistent with those in the table - e.g., "4.0 ms" not "4.0 m". Either that or "ms/%" and no units on the axis.

cmb

@whitexp:

PHP Errors:
[10-Mar-2016 15:07:02 America/Sao_Paulo] PHP Fatal error: Call to undefined function rrd_fetch() in /usr/local/www/rrd_fetch_json.php on line 125

That means you don't have pecl-rrd, which has been a dependency since this was in place. What do you see for 'pkg info|grep pecl-rrd'? Should look something like:

[2.3-BETA][root@fw1]/root: pkg info|grep pecl-rrd
pecl-rrd-1.1.3_2               PHP bindings to rrd tool system

jdillard

@samoth:

I'm still not seeing any data in my graphs. Everything shows at zero.

Is there a setting I'm missing?

Thanks,
Tom

are you on 32bit? Have you updated to the latest snapshot?

jdillard

@NOYB:

You know what would be really slick? User programed quick link graph buttons.

See attached image.

That is a possibility with the way the default values will be stored. You would basically just store N set of default values instead on one set. But first things first, let me get the defaults working then you can play around with that.

jdillard

Just bumped to Version 0.9, fixes include:

Added "Save as Defaults" option
Merged NOYBs metadata PR (may need to be tweaked to work with smaller screens, but I think it is a nice touch)

Note: There is a new option to hide the settings panel and that is set to be hidden by default. I will most likely change that to be shown be default next week, but that is a different issue. If your settings panel is hidden goto System > General Setup to show it.

I'll circle back around to the units issues next week.

samoth

@jdillard:

@samoth:

I'm still not seeing any data in my graphs. Everything shows at zero.

Is there a setting I'm missing?

Thanks,
Tom

are you on 32bit? Have you updated to the latest snapshot?

Running 64bit. Just got it working by turning on RRD graphs in the DHCP server. Now all the graph choices work.

2016-03-11_212741.png_thumb

MikeV7896

The "Save Default" function doesn't seem to work. After I click it, all I get is an error… "There was an error loading the left Y axis". The error appears regardless of what I set the left axis to. I haven't tried also setting the right axis then saving.

grandrivers

any way on full installs to retain more data points (less data set consolidation) for at least up to 3 months ?